view mercurial/pathutil.py @ 37716:dfc51a482031

registrar: replace "cmdtype" with an intent-based mechanism (API)

Commands perform varied actions and repositories vary in their
capabilities.

Historically, the .hg/requires file has been used to lock out clients
lacking a requirement. But this is a very heavy-handed approach and
is typically reserved for cases where the on-disk storage format
changes and we want to prevent incompatible clients from operating on
a repo.

Outside of the .hg/requires file, we tend to deal with things like
optional, extension-provided features via checking at call sites.
We'll either have checks in core or extensions will monkeypatch
functions in core disabling incompatible features, enabling new
features, etc.

Things are somewhat tolerable today. But once we introduce alternate
storage backends with varying support for repository features and
vastly different modes of behavior, the current model will quickly
grow unwieldy. For example, the implementation of the "simple store"
required a lot of hacks to deal with stripping and verify because
various parts of core assume things are implemented a certain way.
Partial clone will require new ways of modeling file data retrieval,
because we can no longer assume that all file data is already local.
In this new world, some commands might not make any sense for certain
types of repositories.

What we need is a mechanism to affect the construction of repository
(and eventually peer) instances so the requirements/capabilities
needed for the current operation can be taken into account. "Current
operation" can almost certainly be defined by a command. So it makes
sense for commands to declare their intended actions.

This commit introduces the "intents" concept on the command registrar.
"intents" captures a set of strings that declare actions that are
anticipated to be taken, requirements the repository must possess, etc.
These intents will be passed into hg.repo(), which will pass them into
localrepository, where they can be used to influence the object being
created. Some use cases for this include:

* For read-only intents, constructing a repository object that doesn't
  expose methods that can mutate the repository. Its VFS instances
  don't even allow opening a file with write access.
* For read-only intents, constructing a repository object without
  cache invalidation logic. If the repo never changes during its lifetime,
  nothing ever needs to be invalidated and we don't need to do expensive
  things like verify the changelog's hidden revisions state is accurate
  every time we access repo.changelog.
* We can automatically hide commands from `hg help` when the current
  repository doesn't provide that command. For example, an alternate
  storage backend may not support `hg commit`, so we can hide that
  command or anything else that would perform local commits.

We already kind of had an "intents" mechanism on the registrar in the
form of "cmdtype." However, it was never used. And it was limited to
a single value. We really need something that supports multiple
intents. And because intents may be defined by extensions and at this
point are advisory, I think it is best to define them in a set rather
than as separate arguments/attributes on the command.

Differential Revision: https://phab.mercurial-scm.org/D3376

from __future__ import absolute_import

import errno
import os
import posixpath
import stat

from .i18n import _
from . import (
    encoding,
    error,
    pycompat,
    util,
)

def _lowerclean(s):
    return encoding.hfsignoreclean(s.lower())

class pathauditor(object):
    '''ensure that a filesystem path contains no banned components.
    the following properties of a path are checked:

    - ends with a directory separator
    - under top-level .hg
    - starts at the root of a windows drive
    - contains ".."

    More check are also done about the file system states:
    - traverses a symlink (e.g. a/symlink_here/b)
    - inside a nested repository (a callback can be used to approve
      some nested repositories, e.g., subrepositories)

    The file system checks are only done when 'realfs' is set to True (the
    default). They should be disable then we are auditing path for operation on
    stored history.

    If 'cached' is set to True, audited paths and sub-directories are cached.
    Be careful to not keep the cache of unmanaged directories for long because
    audited paths may be replaced with symlinks.
    '''

    def __init__(self, root, callback=None, realfs=True, cached=False):
        self.audited = set()
        self.auditeddir = set()
        self.root = root
        self._realfs = realfs
        self._cached = cached
        self.callback = callback
        if os.path.lexists(root) and not util.fscasesensitive(root):
            self.normcase = util.normcase
        else:
            self.normcase = lambda x: x

    def __call__(self, path, mode=None):
        '''Check the relative path.
        path may contain a pattern (e.g. foodir/**.txt)'''

        path = util.localpath(path)
        normpath = self.normcase(path)
        if normpath in self.audited:
            return
        # AIX ignores "/" at end of path, others raise EISDIR.
        if util.endswithsep(path):
            raise error.Abort(_("path ends in directory separator: %s") % path)
        parts = util.splitpath(path)
        if (os.path.splitdrive(path)[0]
            or _lowerclean(parts[0]) in ('.hg', '.hg.', '')
            or pycompat.ospardir in parts):
            raise error.Abort(_("path contains illegal component: %s") % path)
        # Windows shortname aliases
        for p in parts:
            if "~" in p:
                first, last = p.split("~", 1)
                if last.isdigit() and first.upper() in ["HG", "HG8B6C"]:
                    raise error.Abort(_("path contains illegal component: %s")
                                     % path)
        if '.hg' in _lowerclean(path):
            lparts = [_lowerclean(p.lower()) for p in parts]
            for p in '.hg', '.hg.':
                if p in lparts[1:]:
                    pos = lparts.index(p)
                    base = os.path.join(*parts[:pos])
                    raise error.Abort(_("path '%s' is inside nested repo %r")
                                      % (path, pycompat.bytestr(base)))

        normparts = util.splitpath(normpath)
        assert len(parts) == len(normparts)

        parts.pop()
        normparts.pop()
        prefixes = []
        # It's important that we check the path parts starting from the root.
        # This means we won't accidentally traverse a symlink into some other
        # filesystem (which is potentially expensive to access).
        for i in range(len(parts)):
            prefix = pycompat.ossep.join(parts[:i + 1])
            normprefix = pycompat.ossep.join(normparts[:i + 1])
            if normprefix in self.auditeddir:
                continue
            if self._realfs:
                self._checkfs(prefix, path)
            prefixes.append(normprefix)

        if self._cached:
            self.audited.add(normpath)
            # only add prefixes to the cache after checking everything: we don't
            # want to add "foo/bar/baz" before checking if there's a "foo/.hg"
            self.auditeddir.update(prefixes)

    def _checkfs(self, prefix, path):
        """raise exception if a file system backed check fails"""
        curpath = os.path.join(self.root, prefix)
        try:
            st = os.lstat(curpath)
        except OSError as err:
            # EINVAL can be raised as invalid path syntax under win32.
            # They must be ignored for patterns can be checked too.
            if err.errno not in (errno.ENOENT, errno.ENOTDIR, errno.EINVAL):
                raise
        else:
            if stat.S_ISLNK(st.st_mode):
                msg = (_('path %r traverses symbolic link %r')
                       % (pycompat.bytestr(path), pycompat.bytestr(prefix)))
                raise error.Abort(msg)
            elif (stat.S_ISDIR(st.st_mode) and
                  os.path.isdir(os.path.join(curpath, '.hg'))):
                if not self.callback or not self.callback(curpath):
                    msg = _("path '%s' is inside nested repo %r")
                    raise error.Abort(msg % (path, pycompat.bytestr(prefix)))

    def check(self, path):
        try:
            self(path)
            return True
        except (OSError, error.Abort):
            return False

def canonpath(root, cwd, myname, auditor=None):
    '''return the canonical path of myname, given cwd and root

    >>> def check(root, cwd, myname):
    ...     a = pathauditor(root, realfs=False)
    ...     try:
    ...         return canonpath(root, cwd, myname, a)
    ...     except error.Abort:
    ...         return 'aborted'
    >>> def unixonly(root, cwd, myname, expected='aborted'):
    ...     if pycompat.iswindows:
    ...         return expected
    ...     return check(root, cwd, myname)
    >>> def winonly(root, cwd, myname, expected='aborted'):
    ...     if not pycompat.iswindows:
    ...         return expected
    ...     return check(root, cwd, myname)
    >>> winonly(b'd:\\\\repo', b'c:\\\\dir', b'filename')
    'aborted'
    >>> winonly(b'c:\\\\repo', b'c:\\\\dir', b'filename')
    'aborted'
    >>> winonly(b'c:\\\\repo', b'c:\\\\', b'filename')
    'aborted'
    >>> winonly(b'c:\\\\repo', b'c:\\\\', b'repo\\\\filename',
    ...         b'filename')
    'filename'
    >>> winonly(b'c:\\\\repo', b'c:\\\\repo', b'filename', b'filename')
    'filename'
    >>> winonly(b'c:\\\\repo', b'c:\\\\repo\\\\subdir', b'filename',
    ...         b'subdir/filename')
    'subdir/filename'
    >>> unixonly(b'/repo', b'/dir', b'filename')
    'aborted'
    >>> unixonly(b'/repo', b'/', b'filename')
    'aborted'
    >>> unixonly(b'/repo', b'/', b'repo/filename', b'filename')
    'filename'
    >>> unixonly(b'/repo', b'/repo', b'filename', b'filename')
    'filename'
    >>> unixonly(b'/repo', b'/repo/subdir', b'filename', b'subdir/filename')
    'subdir/filename'
    '''
    if util.endswithsep(root):
        rootsep = root
    else:
        rootsep = root + pycompat.ossep
    name = myname
    if not os.path.isabs(name):
        name = os.path.join(root, cwd, name)
    name = os.path.normpath(name)
    if auditor is None:
        auditor = pathauditor(root)
    if name != rootsep and name.startswith(rootsep):
        name = name[len(rootsep):]
        auditor(name)
        return util.pconvert(name)
    elif name == root:
        return ''
    else:
        # Determine whether `name' is in the hierarchy at or beneath `root',
        # by iterating name=dirname(name) until that causes no change (can't
        # check name == '/', because that doesn't work on windows). The list
        # `rel' holds the reversed list of components making up the relative
        # file name we want.
        rel = []
        while True:
            try:
                s = util.samefile(name, root)
            except OSError:
                s = False
            if s:
                if not rel:
                    # name was actually the same as root (maybe a symlink)
                    return ''
                rel.reverse()
                name = os.path.join(*rel)
                auditor(name)
                return util.pconvert(name)
            dirname, basename = util.split(name)
            rel.append(basename)
            if dirname == name:
                break
            name = dirname

        # A common mistake is to use -R, but specify a file relative to the repo
        # instead of cwd.  Detect that case, and provide a hint to the user.
        hint = None
        try:
            if cwd != root:
                canonpath(root, root, myname, auditor)
                relpath = util.pathto(root, cwd, '')
                if relpath[-1] == pycompat.ossep:
                    relpath = relpath[:-1]
                hint = (_("consider using '--cwd %s'") % relpath)
        except error.Abort:
            pass

        raise error.Abort(_("%s not under root '%s'") % (myname, root),
                         hint=hint)

def normasprefix(path):
    '''normalize the specified path as path prefix

    Returned value can be used safely for "p.startswith(prefix)",
    "p[len(prefix):]", and so on.

    For efficiency, this expects "path" argument to be already
    normalized by "os.path.normpath", "os.path.realpath", and so on.

    See also issue3033 for detail about need of this function.

    >>> normasprefix(b'/foo/bar').replace(pycompat.ossep, b'/')
    '/foo/bar/'
    >>> normasprefix(b'/').replace(pycompat.ossep, b'/')
    '/'
    '''
    d, p = os.path.splitdrive(path)
    if len(p) != len(pycompat.ossep):
        return path + pycompat.ossep
    else:
        return path

# forward two methods from posixpath that do what we need, but we'd
# rather not let our internals know that we're thinking in posix terms
# - instead we'll let them be oblivious.
join = posixpath.join
dirname = posixpath.dirname