view tests/test-convert-hg-startrev.t @ 26631:e077ce385609

localrepo: restore dirstate to one before rollbacking if not parent-gone

'localrepository.rollback()' explicilty restores dirstate, only if at
least one of current parents of the working directory is removed at
rollbacking (a.k.a "parent-gone").

After DirstateTransactionPlan, 'dirstate.write()' will cause marking
'.hg/dirstate' as a file to be restored at rollbacking.

    https://mercurial.selenic.com/wiki/DirstateTransactionPlan

Then, 'transaction.rollback()' restores '.hg/dirstate' regardless of
parents of the working directory at that time, and this causes
unexpected dirstate changes if not "parent-gone" (e.g.  "hg update" to
another branch after "hg commit" or so, then "hg rollback").

To avoid such situation, this patch restores dirstate to one before
rollbacking if not "parent-gone".

  before:
    b1. restore dirstate explicitly, if "parent-gone"

  after:
    a1. save dirstate before actual rollbacking via dirstateguard
    a2. restore dirstate via 'transaction.rollback()'
    a3. if "parent-gone"
        - discard backup (a1)
        - restore dirstate from 'undo.dirstate'
    a4. otherwise, restore dirstate from backup (a1)

Even though restoring dirstate at (a3) after (a2) seems redundant,
this patch keeps this existing code path, because:

  - it isn't ensured that 'dirstate.write()' was invoked at least once
    while transaction running

    If not, '.hg/dirstate' isn't restored at (a2).

    In addition to it, rude 3rd party extension invoking
    'dirstate.write()' without 'repo' while transaction running (see
    subsequent patches for detail) may break consistency of a file
    backup-ed by transaction.

  - this patch mainly focuses on changes for DirstateTransactionPlan

    Restoring dirstate at (a3) itself should be cheaper enough than
    rollbacking itself. Redundancy will be removed in next step.

Newly added test is almost meaningless at this point. It will be used
to detect regression while implementing delayed dirstate write out.

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > [convert]
  > hg.saverev = yes
  > EOF

  $ glog()
  > {
  >     hg -R "$1" log -G --template '{rev} "{desc}" files: {files}\n'
  > }

  $ hg init source
  $ cd source

  $ echo a > a
  $ echo b > b
  $ echo f > f
  $ hg ci -d '0 0' -qAm '0: add a b f'
  $ echo c > c
  $ hg move f d
  $ hg ci -d '1 0' -qAm '1: add c, move f to d'
  $ hg copy a e
  $ echo b >> b
  $ hg ci -d '2 0' -qAm '2: copy e from a, change b'
  $ hg up -C 0
  2 files updated, 0 files merged, 3 files removed, 0 files unresolved
  $ echo a >> a
  $ hg ci -d '3 0' -qAm '3: change a'
  $ hg merge
  merging a and e to e
  3 files updated, 1 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -d '4 0' -qAm '4: merge 2 and 3'
  $ echo a >> a
  $ hg ci -d '5 0' -qAm '5: change a'
  $ cd ..

Convert from null revision

  $ hg convert --config convert.hg.startrev=null source full
  initializing destination full repository
  scanning source...
  sorting...
  converting...
  5 0: add a b f
  4 1: add c, move f to d
  3 2: copy e from a, change b
  2 3: change a
  1 4: merge 2 and 3
  0 5: change a

  $ glog full
  o  5 "5: change a" files: a
  |
  o    4 "4: merge 2 and 3" files: e f
  |\
  | o  3 "3: change a" files: a
  | |
  o |  2 "2: copy e from a, change b" files: b e
  | |
  o |  1 "1: add c, move f to d" files: c d f
  |/
  o  0 "0: add a b f" files: a b f
  
  $ rm -Rf full

Convert from zero revision

  $ hg convert --config convert.hg.startrev=0 source full
  initializing destination full repository
  scanning source...
  sorting...
  converting...
  5 0: add a b f
  4 1: add c, move f to d
  3 2: copy e from a, change b
  2 3: change a
  1 4: merge 2 and 3
  0 5: change a

  $ glog full
  o  5 "5: change a" files: a
  |
  o    4 "4: merge 2 and 3" files: e f
  |\
  | o  3 "3: change a" files: a
  | |
  o |  2 "2: copy e from a, change b" files: b e
  | |
  o |  1 "1: add c, move f to d" files: c d f
  |/
  o  0 "0: add a b f" files: a b f
  
Convert from merge parent

  $ hg convert --config convert.hg.startrev=1 source conv1
  initializing destination conv1 repository
  scanning source...
  sorting...
  converting...
  3 1: add c, move f to d
  2 2: copy e from a, change b
  1 4: merge 2 and 3
  0 5: change a

  $ glog conv1
  o  3 "5: change a" files: a
  |
  o  2 "4: merge 2 and 3" files: a e
  |
  o  1 "2: copy e from a, change b" files: b e
  |
  o  0 "1: add c, move f to d" files: a b c d
  
  $ cd conv1
  $ hg up -q

Check copy preservation

  $ hg st -C --change 2 e
  M e
  $ hg st -C --change 1 e
  A e
    a
  $ hg st -C --change 0 a
  A a

(It seems like a bug in log that the following doesn't show rev 1.)

  $ hg log --follow --copies e
  changeset:   2:82bbac3d2cf4
  user:        test
  date:        Thu Jan 01 00:00:04 1970 +0000
  summary:     4: merge 2 and 3
  
  changeset:   0:23c3be426dce
  user:        test
  date:        Thu Jan 01 00:00:01 1970 +0000
  summary:     1: add c, move f to d
  
Check copy removal on missing parent

  $ hg log --follow --copies d
  changeset:   0:23c3be426dce
  user:        test
  date:        Thu Jan 01 00:00:01 1970 +0000
  summary:     1: add c, move f to d
  
  $ hg cat -r tip a b
  a
  a
  a
  b
  b
  $ hg -q verify
  $ cd ..

Convert from merge

  $ hg convert --config convert.hg.startrev=4 source conv4
  initializing destination conv4 repository
  scanning source...
  sorting...
  converting...
  1 4: merge 2 and 3
  0 5: change a
  $ glog conv4
  o  1 "5: change a" files: a
  |
  o  0 "4: merge 2 and 3" files: a b c d e
  
  $ cd conv4
  $ hg up -C
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg cat -r tip a b
  a
  a
  a
  b
  b
  $ hg -q verify
  $ cd ..

Convert from revset in convert.hg.revs

  $ hg convert --config convert.hg.revs='3:4+0' source revsetrepo
  initializing destination revsetrepo repository
  scanning source...
  sorting...
  converting...
  2 0: add a b f
  1 3: change a
  0 4: merge 2 and 3

  $ glog revsetrepo
  o  2 "4: merge 2 and 3" files: b c d e f
  |
  o  1 "3: change a" files: a
  |
  o  0 "0: add a b f" files: a b f
  
Convert from specified revs

  $ hg convert --rev 3 --rev 2 source multiplerevs
  initializing destination multiplerevs repository
  scanning source...
  sorting...
  converting...
  3 0: add a b f
  2 1: add c, move f to d
  1 2: copy e from a, change b
  0 3: change a
  $ glog multiplerevs
  o  3 "3: change a" files: a
  |
  | o  2 "2: copy e from a, change b" files: b e
  | |
  | o  1 "1: add c, move f to d" files: c d f
  |/
  o  0 "0: add a b f" files: a b f