Mercurial > hg
view tests/test-pull-branch.t @ 26631:e077ce385609
localrepo: restore dirstate to one before rollbacking if not parent-gone
'localrepository.rollback()' explicilty restores dirstate, only if at
least one of current parents of the working directory is removed at
rollbacking (a.k.a "parent-gone").
After DirstateTransactionPlan, 'dirstate.write()' will cause marking
'.hg/dirstate' as a file to be restored at rollbacking.
https://mercurial.selenic.com/wiki/DirstateTransactionPlan
Then, 'transaction.rollback()' restores '.hg/dirstate' regardless of
parents of the working directory at that time, and this causes
unexpected dirstate changes if not "parent-gone" (e.g. "hg update" to
another branch after "hg commit" or so, then "hg rollback").
To avoid such situation, this patch restores dirstate to one before
rollbacking if not "parent-gone".
before:
b1. restore dirstate explicitly, if "parent-gone"
after:
a1. save dirstate before actual rollbacking via dirstateguard
a2. restore dirstate via 'transaction.rollback()'
a3. if "parent-gone"
- discard backup (a1)
- restore dirstate from 'undo.dirstate'
a4. otherwise, restore dirstate from backup (a1)
Even though restoring dirstate at (a3) after (a2) seems redundant,
this patch keeps this existing code path, because:
- it isn't ensured that 'dirstate.write()' was invoked at least once
while transaction running
If not, '.hg/dirstate' isn't restored at (a2).
In addition to it, rude 3rd party extension invoking
'dirstate.write()' without 'repo' while transaction running (see
subsequent patches for detail) may break consistency of a file
backup-ed by transaction.
- this patch mainly focuses on changes for DirstateTransactionPlan
Restoring dirstate at (a3) itself should be cheaper enough than
rollbacking itself. Redundancy will be removed in next step.
Newly added test is almost meaningless at this point. It will be used
to detect regression while implementing delayed dirstate write out.
author | FUJIWARA Katsunori <foozy@lares.dti.ne.jp> |
---|---|
date | Tue, 13 Oct 2015 12:25:43 -0700 |
parents | 701df761aa94 |
children | ca2a0a654f54 |
line wrap: on
line source
$ hg init t $ cd t $ echo 1 > foo $ hg ci -Am1 # 0 adding foo $ hg branch branchA marked working directory as branch branchA (branches are permanent and global, did you want a bookmark?) $ echo a1 > foo $ hg ci -ma1 # 1 $ cd .. $ hg init tt $ cd tt $ hg pull ../t pulling from ../t requesting all changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 1 files (run 'hg update' to get a working copy) $ hg up branchA 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd ../t $ echo a2 > foo $ hg ci -ma2 # 2 Create branch B: $ hg up 0 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg branch branchB marked working directory as branch branchB $ echo b1 > foo $ hg ci -mb1 # 3 $ cd ../tt A new branch is there $ hg pull -u ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 1 files (+1 heads) 1 files updated, 0 files merged, 0 files removed, 0 files unresolved Develop both branches: $ cd ../t $ hg up branchA 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a3 > foo $ hg ci -ma3 # 4 $ hg up branchB 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b2 > foo $ hg ci -mb2 # 5 $ cd ../tt Should succeed, no new heads: $ hg pull -u ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 1 files 1 files updated, 0 files merged, 0 files removed, 0 files unresolved Add a head on other branch: $ cd ../t $ hg up branchA 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a4 > foo $ hg ci -ma4 # 6 $ hg up branchB 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b3.1 > foo $ hg ci -m b3.1 # 7 $ hg up 5 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b3.2 > foo $ hg ci -m b3.2 # 8 created new head $ cd ../tt Should succeed because there is only one head on our branch: $ hg pull -u ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 3 changesets with 3 changes to 1 files (+1 heads) 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd ../t $ hg up -C branchA 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a5.1 > foo $ hg ci -ma5.1 # 9 $ hg up 6 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a5.2 > foo $ hg ci -ma5.2 # 10 created new head $ hg up 7 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b4.1 > foo $ hg ci -m b4.1 # 11 $ hg up -C 8 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b4.2 > foo $ hg ci -m b4.2 # 12 $ cd ../tt $ hg pull -u ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 4 changesets with 4 changes to 1 files (+1 heads) 1 files updated, 0 files merged, 0 files removed, 0 files unresolved Make changes on new branch on tt $ hg up 6 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg branch branchC marked working directory as branch branchC $ echo b1 > bar $ hg ci -Am "commit on branchC on tt" adding bar Make changes on default branch on t $ cd ../t $ hg up -C default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a1 > bar $ hg ci -Am "commit on default on t" adding bar Pull branchC from tt $ hg pull ../tt pulling from ../tt searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) (run 'hg heads' to see heads) Make changes on default and branchC on tt $ cd ../tt $ hg pull ../t pulling from ../t searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) (run 'hg heads' to see heads) $ hg up -C default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a1 > bar1 $ hg ci -Am "commit on default on tt" adding bar1 $ hg up branchC 2 files updated, 0 files merged, 1 files removed, 0 files unresolved $ echo a1 > bar2 $ hg ci -Am "commit on branchC on tt" adding bar2 Make changes on default and branchC on t $ cd ../t $ hg up default 0 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a1 > bar3 $ hg ci -Am "commit on default on t" adding bar3 $ hg up branchC 2 files updated, 0 files merged, 1 files removed, 0 files unresolved $ echo a1 > bar4 $ hg ci -Am "commit on branchC on tt" adding bar4 Pull from tt $ hg pull ../tt pulling from ../tt searching for changes adding changesets adding manifests adding file changes added 2 changesets with 2 changes to 2 files (+2 heads) (run 'hg heads .' to see heads, 'hg merge' to merge) $ cd ..