Mercurial > hg
view hgext/relink.py @ 40811:e13ab4acf555
rust: peek_mut optim for lazy ancestors
This is one of the two optimizations that are also
present in the Python code: replacing pairs of pop/push
on the BinaryHeap by single updates, hence having it
under the hood maintain its consistency (sift) only once.
On Mozilla central, the measured gain (see details below)
is around 7%.
Creating the PeekMut object by calling peek_mut() right away
instead of peek() first is less efficient (gain is only 4%, stats
not included).
Our interpretation is that its creation has a cost which is vasted
in the cases where it ends by droping the value (Peekmut::pop()
just does self.heap.pop() anyway). On the other hand, the immutable
peek() is very fast: it's just taking a reference in the
underlying vector.
The Python version still has another optimization:
if parent(current) == current-1, then the heap doesn't need
to maintain its consistency, since we already know that
it's bigger than all the others in the heap.
Rust's BinaryHeap doesn't allow us to mutate its biggest
element with no housekeeping, but we tried it anyway, with a
copy of the BinaryHeap implementation with a dedicaded added
method: it's not worth the technical debt in our opinion
(we measured only a further 1.6% improvement).
One possible explanation would be that the sift is really fast
anyway in that case, whereas it's not in the case of Python,
because it's at least partly done in slow Python code.
Still it's possible that replacing BinaryHeap by something more
dedicated to discrete ordered types could be faster.
Measurements on mozilla-central:
Three runs of 'hg perfancestors' on the parent changeset:
Moyenne des médianes: 0.100587
! wall 0.100062 comb 0.100000 user 0.100000 sys 0.000000 (best of 98)
! wall 0.135804 comb 0.130000 user 0.130000 sys 0.000000 (max of 98)
! wall 0.102864 comb 0.102755 user 0.099286 sys 0.003469 (avg of 98)
! wall 0.101486 comb 0.110000 user 0.110000 sys 0.000000 (median of 98)
! wall 0.096804 comb 0.090000 user 0.090000 sys 0.000000 (best of 100)
! wall 0.132235 comb 0.130000 user 0.120000 sys 0.010000 (max of 100)
! wall 0.100258 comb 0.100300 user 0.096000 sys 0.004300 (avg of 100)
! wall 0.098384 comb 0.100000 user 0.100000 sys 0.000000 (median of 100)
! wall 0.099925 comb 0.100000 user 0.100000 sys 0.000000 (best of 98)
! wall 0.133518 comb 0.140000 user 0.130000 sys 0.010000 (max of 98)
! wall 0.102381 comb 0.102449 user 0.098265 sys 0.004184 (avg of 98)
! wall 0.101891 comb 0.090000 user 0.090000 sys 0.000000 (median of 98)
Mean of the medians: 0.100587
On the present changeset:
! wall 0.091344 comb 0.090000 user 0.090000 sys 0.000000 (best of 100)
! wall 0.122728 comb 0.120000 user 0.110000 sys 0.010000 (max of 100)
! wall 0.093268 comb 0.093300 user 0.089300 sys 0.004000 (avg of 100)
! wall 0.092567 comb 0.100000 user 0.090000 sys 0.010000 (median of 100)
! wall 0.093294 comb 0.080000 user 0.080000 sys 0.000000 (best of 100)
! wall 0.144887 comb 0.150000 user 0.140000 sys 0.010000 (max of 100)
! wall 0.097708 comb 0.097700 user 0.093400 sys 0.004300 (avg of 100)
! wall 0.094980 comb 0.100000 user 0.090000 sys 0.010000 (median of 100)
! wall 0.091262 comb 0.090000 user 0.080000 sys 0.010000 (best of 100)
! wall 0.123772 comb 0.130000 user 0.120000 sys 0.010000 (max of 100)
! wall 0.093188 comb 0.093200 user 0.089300 sys 0.003900 (avg of 100)
! wall 0.092364 comb 0.100000 user 0.090000 sys 0.010000 (median of 100)
Mean of the medians is 0.0933
Differential Revision: https://phab.mercurial-scm.org/D5358
author | Georges Racinet <gracinet@anybox.fr> |
---|---|
date | Thu, 29 Nov 2018 09:13:13 +0000 |
parents | c303d65d2e34 |
children | 2372284d9457 |
line wrap: on
line source
# Mercurial extension to provide 'hg relink' command # # Copyright (C) 2007 Brendan Cully <brendan@kublai.com> # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. """recreates hardlinks between repository clones""" from __future__ import absolute_import import os import stat from mercurial.i18n import _ from mercurial import ( error, hg, registrar, util, ) from mercurial.utils import ( stringutil, ) cmdtable = {} command = registrar.command(cmdtable) # Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for # extensions which SHIP WITH MERCURIAL. Non-mainline extensions should # be specifying the version(s) of Mercurial they are tested with, or # leave the attribute unspecified. testedwith = 'ships-with-hg-core' @command('relink', [], _('[ORIGIN]'), helpcategory=command.CATEGORY_MAINTENANCE) def relink(ui, repo, origin=None, **opts): """recreate hardlinks between two repositories When repositories are cloned locally, their data files will be hardlinked so that they only use the space of a single repository. Unfortunately, subsequent pulls into either repository will break hardlinks for any files touched by the new changesets, even if both repositories end up pulling the same changes. Similarly, passing --rev to "hg clone" will fail to use any hardlinks, falling back to a complete copy of the source repository. This command lets you recreate those hardlinks and reclaim that wasted space. This repository will be relinked to share space with ORIGIN, which must be on the same local disk. If ORIGIN is omitted, looks for "default-relink", then "default", in [paths]. Do not attempt any read operations on this repository while the command is running. (Both repositories will be locked against writes.) """ if (not util.safehasattr(util, 'samefile') or not util.safehasattr(util, 'samedevice')): raise error.Abort(_('hardlinks are not supported on this system')) src = hg.repository(repo.baseui, ui.expandpath(origin or 'default-relink', origin or 'default')) ui.status(_('relinking %s to %s\n') % (src.store.path, repo.store.path)) if repo.root == src.root: ui.status(_('there is nothing to relink\n')) return if not util.samedevice(src.store.path, repo.store.path): # No point in continuing raise error.Abort(_('source and destination are on different devices')) with repo.lock(), src.lock(): candidates = sorted(collect(src, ui)) targets = prune(candidates, src.store.path, repo.store.path, ui) do_relink(src.store.path, repo.store.path, targets, ui) def collect(src, ui): seplen = len(os.path.sep) candidates = [] live = len(src['tip'].manifest()) # Your average repository has some files which were deleted before # the tip revision. We account for that by assuming that there are # 3 tracked files for every 2 live files as of the tip version of # the repository. # # mozilla-central as of 2010-06-10 had a ratio of just over 7:5. total = live * 3 // 2 src = src.store.path progress = ui.makeprogress(_('collecting'), unit=_('files'), total=total) pos = 0 ui.status(_("tip has %d files, estimated total number of files: %d\n") % (live, total)) for dirpath, dirnames, filenames in os.walk(src): dirnames.sort() relpath = dirpath[len(src) + seplen:] for filename in sorted(filenames): if filename[-2:] not in ('.d', '.i'): continue st = os.stat(os.path.join(dirpath, filename)) if not stat.S_ISREG(st.st_mode): continue pos += 1 candidates.append((os.path.join(relpath, filename), st)) progress.update(pos, item=filename) progress.complete() ui.status(_('collected %d candidate storage files\n') % len(candidates)) return candidates def prune(candidates, src, dst, ui): def linkfilter(src, dst, st): try: ts = os.stat(dst) except OSError: # Destination doesn't have this file? return False if util.samefile(src, dst): return False if not util.samedevice(src, dst): # No point in continuing raise error.Abort( _('source and destination are on different devices')) if st.st_size != ts.st_size: return False return st targets = [] progress = ui.makeprogress(_('pruning'), unit=_('files'), total=len(candidates)) pos = 0 for fn, st in candidates: pos += 1 srcpath = os.path.join(src, fn) tgt = os.path.join(dst, fn) ts = linkfilter(srcpath, tgt, st) if not ts: ui.debug('not linkable: %s\n' % fn) continue targets.append((fn, ts.st_size)) progress.update(pos, item=fn) progress.complete() ui.status(_('pruned down to %d probably relinkable files\n') % len(targets)) return targets def do_relink(src, dst, files, ui): def relinkfile(src, dst): bak = dst + '.bak' os.rename(dst, bak) try: util.oslink(src, dst) except OSError: os.rename(bak, dst) raise os.remove(bak) CHUNKLEN = 65536 relinked = 0 savedbytes = 0 progress = ui.makeprogress(_('relinking'), unit=_('files'), total=len(files)) pos = 0 for f, sz in files: pos += 1 source = os.path.join(src, f) tgt = os.path.join(dst, f) # Binary mode, so that read() works correctly, especially on Windows sfp = open(source, 'rb') dfp = open(tgt, 'rb') sin = sfp.read(CHUNKLEN) while sin: din = dfp.read(CHUNKLEN) if sin != din: break sin = sfp.read(CHUNKLEN) sfp.close() dfp.close() if sin: ui.debug('not linkable: %s\n' % f) continue try: relinkfile(source, tgt) progress.update(pos, item=f) relinked += 1 savedbytes += sz except OSError as inst: ui.warn('%s: %s\n' % (tgt, stringutil.forcebytestr(inst))) progress.complete() ui.status(_('relinked %d files (%s reclaimed)\n') % (relinked, util.bytecount(savedbytes)))