view tests/test-chg.t @ 49777:e1953a34c110

bundle: emit full snapshot as is, without doing a redelta

With the new `forced` delta-reused policy, it become important to be able to
send full snapshot where full snapshot are needed. Otherwise, the fallback delta
will simply be used on the client side… creating monstrous delta chain, since
revision that are meant as a reset of delta-chain chain becoming too complex are
simply adding a new full delta-tree on the leaf of another one.

In the `non-forced` cases, client process full snapshot from the bundle
differently from deltas, so client will still try to convert the full snapshot
into a delta if possible. So this will no lead to pathological storage
explosion.

I have considered making this configurable, but the impact seems limited enough
that it does not seems to be worth it. Especially with the current
sparse-revlog format that use "delta-tree" with multiple level snapshots, full
snapshot are much less frequent and not that different from other intermediate
snapshot that we are already sending over the wire anyway.

CPU wise, this will help the bundling side a little as it will not need to
reconstruct revisions and compute deltas. The unbundling side might save a tiny
amount of CPU as it won't need to reconstruct the delta-base to reconstruct the
revision full text. This only slightly visible in some of the benchmarks. And
have no real impact on most of them.

### data-env-vars.name      = pypy-2018-08-01-zstd-sparse-revlog
  # benchmark.name          = perf-bundle
  # benchmark.variants.revs = last-40000
before:          11.467186 seconds
just-emit-full:  11.190576 seconds   (-2.41%)
with-pull-force: 11.041091 seconds   (-3.72%)
  # benchmark.name          = perf-unbundle
  # benchmark.variants.revs = last-40000
before:     16.744862
just-emit-full:: 16.561036 seconds   (-1.10%)
with-pull-force: 16.389344 seconds   (-2.12%)
  # benchmark.name          = pull
  # benchmark.variants.revs = last-40000
before:     26.870569
just-emit-full:  26.391188 seconds   (-1.78%)
with-pull-force: 25.633184 seconds   (-4.60%)


Space wise (so network-wise) the impact is fairly small. When taking compression into
account.

Below are tests the size of `hg bundle --all` for a handful of benchmark repositories
(with bzip, zstd compression and without it)

This show a small increase in the bundle size, but nothing really significant
except maybe for mozilla-try (+12%) that nobody really pulls large chunk of anyway.
Mozilla-try is also the repository that benefit the most for not having to
recompute deltas client size.

### mercurial:
bzip-before:     26 406 342 bytes
bzip-after:      26 691 543 bytes  +1.08%

zstd-before:     27 918 645 bytes
zstd-after:      28 075 896 bytes  +0.56%

none-before:     98 675 601 bytes
none-after:     100 411 237 bytes  +1.76%


### pypy
bzip-before:    201 295 752 bytes
bzip-after:     209 780 282 bytes  +4.21%

zstd-before:    202 974 795 bytes
zstd-after:     205 165 780 bytes  +1.08%

none-before:    871 070 261 bytes
none-after:     993 595 057 bytes +14.07%


### netbeans
bzip-before:    601 314 330 bytes
bzip-after:     614 246 241 bytes  +2.15%

zstd-before:    604 745 136 bytes
zstd-after:     615 497 705 bytes  +1.78%

none-before:  3 338 238 571 bytes
none-after:   3 439 422 535 bytes  +3.03%


### mozilla-central
bzip-before:  1 493 006 921 bytes
bzip-after:   1 549 650 570 bytes  +3.79%

zstd-before:  1 481 910 102 bytes
zstd-after:   1 513 052 415 bytes  +2.10%

none-before:  6 535 929 910 bytes
none-after:   7 010 191 342 bytes  +7.26%


### mozilla-try
bzip-before:  6 583 425 999 bytes
bzip-after:   7 423 536 928 bytes +12.76%

zstd-before:  6 021 009 212 bytes
zstd-after:   6 674 922 420 bytes +10.86%

none-before: 22 954 739 558 bytes
none-after:  26 013 854 771 bytes +13.32%

#require chg

  $ mkdir log
  $ cp $HGRCPATH $HGRCPATH.unconfigured
  $ cat <<'EOF' >> $HGRCPATH
  > [cmdserver]
  > log = $TESTTMP/log/server.log
  > max-log-files = 1
  > max-log-size = 10 kB
  > EOF
  $ cp $HGRCPATH $HGRCPATH.orig

  $ filterlog () {
  >   sed -e 's!^[0-9/]* [0-9:]* ([0-9]*)>!YYYY/MM/DD HH:MM:SS (PID)>!' \
  >       -e 's!\(setprocname\|received fds\|setenv\): .*!\1: ...!' \
  >       -e 's!\(confighash\|mtimehash\) = [0-9a-f]*!\1 = ...!g' \
  >       -e 's!\(in \)[0-9.]*s\b!\1 ...s!g' \
  >       -e 's!\(pid\)=[0-9]*!\1=...!g' \
  >       -e 's!\(/server-\)[0-9a-f]*!\1...!g'
  > }

init repo

  $ chg init foo
  $ cd foo

ill-formed config

  $ chg status
  $ echo '=brokenconfig' >> $HGRCPATH
  $ chg status
  config error at * =brokenconfig (glob)
  [30]

  $ cp $HGRCPATH.orig $HGRCPATH

long socket path

  $ sockpath=$TESTTMP/this/path/should/be/longer/than/one-hundred-and-seven/characters/where/107/is/the/typical/size/limit/of/unix-domain-socket
  $ mkdir -p $sockpath
  $ bakchgsockname=$CHGSOCKNAME
  $ CHGSOCKNAME=$sockpath/server
  $ export CHGSOCKNAME
  $ chg root
  $TESTTMP/foo
  $ rm -rf $sockpath
  $ CHGSOCKNAME=$bakchgsockname
  $ export CHGSOCKNAME

  $ cd ..

editor
------

  $ cat >> pushbuffer.py <<EOF
  > def reposetup(ui, repo):
  >     repo.ui.pushbuffer(subproc=True)
  > EOF

  $ chg init editor
  $ cd editor

by default, system() should be redirected to the client:

  $ touch foo
  $ CHGDEBUG= HGEDITOR=cat chg ci -Am channeled --edit 2>&1 \
  > | egrep "HG:|run 'cat"
  chg: debug: * run 'cat "*"' at '$TESTTMP/editor' (glob)
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to abort commit.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added foo

but no redirection should be made if output is captured:

  $ touch bar
  $ CHGDEBUG= HGEDITOR=cat chg ci -Am bufferred --edit \
  > --config extensions.pushbuffer="$TESTTMP/pushbuffer.py" 2>&1 \
  > | egrep "HG:|run 'cat"
  [1]

check that commit commands succeeded:

  $ hg log -T '{rev}:{desc}\n'
  1:bufferred
  0:channeled

  $ cd ..

pager
-----

  $ cat >> fakepager.py <<EOF
  > import sys
  > for line in sys.stdin:
  >     sys.stdout.write('paged! %r\n' % line)
  > EOF

enable pager extension globally, but spawns the master server with no tty:

  $ chg init pager
  $ cd pager
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > pager =
  > [pager]
  > pager = "$PYTHON" $TESTTMP/fakepager.py
  > EOF
  $ chg version > /dev/null
  $ touch foo
  $ chg ci -qAm foo

pager should be enabled if the attached client has a tty:

  $ chg log -l1 -q --config ui.formatted=True
  paged! '0:1f7b0de80e11\n'
  $ chg log -l1 -q --config ui.formatted=False
  0:1f7b0de80e11

chg waits for pager if runcommand raises

  $ cat > $TESTTMP/crash.py <<EOF
  > from mercurial import registrar
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > @command(b'crash')
  > def pagercrash(ui, repo, *pats, **opts):
  >     ui.write(b'going to crash\n')
  >     raise Exception('.')
  > EOF

  $ cat > $TESTTMP/fakepager.py <<EOF
  > import sys
  > import time
  > for line in iter(sys.stdin.readline, ''):
  >     if 'crash' in line: # only interested in lines containing 'crash'
  >         # if chg exits when pager is sleeping (incorrectly), the output
  >         # will be captured by the next test case
  >         time.sleep(1)
  >         sys.stdout.write('crash-pager: %s' % line)
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > crash = $TESTTMP/crash.py
  > EOF

  $ chg crash --pager=on --config ui.formatted=True 2>/dev/null
  crash-pager: going to crash
  [255]

no stdout data should be printed after pager quits, and the buffered data
should never persist (issue6207)

"killed!" may be printed if terminated by SIGPIPE, which isn't important
in this test.

  $ cat > $TESTTMP/bulkwrite.py <<'EOF'
  > import time
  > from mercurial import error, registrar
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > @command(b'bulkwrite')
  > def bulkwrite(ui, repo, *pats, **opts):
  >     ui.write(b'going to write massive data\n')
  >     ui.flush()
  >     t = time.time()
  >     while time.time() - t < 2:
  >         ui.write(b'x' * 1023 + b'\n')  # will be interrupted by SIGPIPE
  >     raise error.Abort(b"write() doesn't block")
  > EOF

  $ cat > $TESTTMP/fakepager.py <<'EOF'
  > import sys
  > import time
  > sys.stdout.write('paged! %r\n' % sys.stdin.readline())
  > time.sleep(1)  # new data will be written
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > bulkwrite = $TESTTMP/bulkwrite.py
  > EOF

  $ chg bulkwrite --pager=on --color no --config ui.formatted=True
  paged! 'going to write massive data\n'
  killed! (?)
  [255]

  $ chg bulkwrite --pager=on --color no --config ui.formatted=True
  paged! 'going to write massive data\n'
  killed! (?)
  [255]

  $ cd ..

missing stdio
-------------

  $ CHGDEBUG=1 chg version -q 0<&-
  chg: debug: * stdio fds are missing (glob)
  chg: debug: * execute original hg (glob)
  Mercurial Distributed SCM * (glob)

server lifecycle
----------------

chg server should be restarted on code change, and old server will shut down
automatically. In this test, we use the following time parameters:

 - "sleep 1" to make mtime different
 - "sleep 2" to notice mtime change (polling interval is 1 sec)

set up repository with an extension:

  $ chg init extreload
  $ cd extreload
  $ touch dummyext.py
  $ cat <<EOF >> .hg/hgrc
  > [extensions]
  > dummyext = dummyext.py
  > EOF

isolate socket directory for stable result:

  $ OLDCHGSOCKNAME=$CHGSOCKNAME
  $ mkdir chgsock
  $ CHGSOCKNAME=`pwd`/chgsock/server

warm up server:

  $ CHGDEBUG= chg log 2>&1 | egrep 'instruction|start'
  chg: debug: * start cmdserver at $TESTTMP/extreload/chgsock/server.* (glob)

new server should be started if extension modified:

  $ sleep 1
  $ touch dummyext.py
  $ CHGDEBUG= chg log 2>&1 | egrep 'instruction|start'
  chg: debug: * instruction: unlink $TESTTMP/extreload/chgsock/server-* (glob)
  chg: debug: * instruction: reconnect (glob)
  chg: debug: * start cmdserver at $TESTTMP/extreload/chgsock/server.* (glob)

old server will shut down, while new server should still be reachable:

  $ sleep 2
  $ CHGDEBUG= chg log 2>&1 | (egrep 'instruction|start' || true)

socket file should never be unlinked by old server:
(simulates unowned socket by updating mtime, which makes sure server exits
at polling cycle)

  $ ls chgsock/server-*
  chgsock/server-* (glob)
  $ touch chgsock/server-*
  $ sleep 2
  $ ls chgsock/server-*
  chgsock/server-* (glob)

since no server is reachable from socket file, new server should be started:
(this test makes sure that old server shut down automatically)

  $ CHGDEBUG= chg log 2>&1 | egrep 'instruction|start'
  chg: debug: * start cmdserver at $TESTTMP/extreload/chgsock/server.* (glob)

shut down servers and restore environment:

  $ rm -R chgsock
  $ sleep 2
  $ CHGSOCKNAME=$OLDCHGSOCKNAME
  $ cd ..

check that server events are recorded:

  $ ls log
  server.log
  server.log.1

print only the last 10 lines, since we aren't sure how many records are
preserved (since setprocname isn't available on py3 and pure version,
the 10th-most-recent line is different when using py3):

  $ cat log/server.log.1 log/server.log | tail -10 | filterlog
  YYYY/MM/DD HH:MM:SS (PID)> confighash = ... mtimehash = ... (no-setprocname !)
  YYYY/MM/DD HH:MM:SS (PID)> forked worker process (pid=...)
  YYYY/MM/DD HH:MM:SS (PID)> setprocname: ... (setprocname !)
  YYYY/MM/DD HH:MM:SS (PID)> received fds: ...
  YYYY/MM/DD HH:MM:SS (PID)> chdir to '$TESTTMP/extreload'
  YYYY/MM/DD HH:MM:SS (PID)> setumask 18
  YYYY/MM/DD HH:MM:SS (PID)> setenv: ...
  YYYY/MM/DD HH:MM:SS (PID)> confighash = ... mtimehash = ...
  YYYY/MM/DD HH:MM:SS (PID)> validate: []
  YYYY/MM/DD HH:MM:SS (PID)> worker process exited (pid=...)
  YYYY/MM/DD HH:MM:SS (PID)> $TESTTMP/extreload/chgsock/server-... is not owned, exiting.

global data mutated by schems
-----------------------------

  $ hg init schemes
  $ cd schemes

initial state

  $ cat > .hg/hgrc <<'EOF'
  > [extensions]
  > schemes =
  > [schemes]
  > foo = https://foo.example.org/
  > EOF
  $ hg debugexpandscheme foo://expanded
  https://foo.example.org/expanded
  $ hg debugexpandscheme bar://unexpanded
  bar://unexpanded

add bar

  $ cat > .hg/hgrc <<'EOF'
  > [extensions]
  > schemes =
  > [schemes]
  > foo = https://foo.example.org/
  > bar = https://bar.example.org/
  > EOF
  $ hg debugexpandscheme foo://expanded
  https://foo.example.org/expanded
  $ hg debugexpandscheme bar://expanded
  https://bar.example.org/expanded

remove foo

  $ cat > .hg/hgrc <<'EOF'
  > [extensions]
  > schemes =
  > [schemes]
  > bar = https://bar.example.org/
  > EOF
  $ hg debugexpandscheme foo://unexpanded
  foo://unexpanded
  $ hg debugexpandscheme bar://expanded
  https://bar.example.org/expanded

  $ cd ..

repository cache
----------------

  $ rm log/server.log*
  $ cp $HGRCPATH.unconfigured $HGRCPATH
  $ cat <<'EOF' >> $HGRCPATH
  > [cmdserver]
  > log = $TESTTMP/log/server.log
  > max-repo-cache = 1
  > track-log = command, repocache
  > EOF

isolate socket directory for stable result:

  $ OLDCHGSOCKNAME=$CHGSOCKNAME
  $ mkdir chgsock
  $ CHGSOCKNAME=`pwd`/chgsock/server

create empty repo and cache it:

  $ hg init cached
  $ hg id -R cached
  000000000000 tip
  $ sleep 1

modify repo (and cache will be invalidated):

  $ touch cached/a
  $ hg ci -R cached -Am 'add a'
  adding a
  $ sleep 1

read cached repo:

  $ hg log -R cached
  changeset:   0:ac82d8b1f7c4
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add a
  
  $ sleep 1

discard cached from LRU cache:

  $ hg clone cached cached2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg id -R cached2
  ac82d8b1f7c4 tip
  $ sleep 1

read uncached repo:

  $ hg log -R cached
  changeset:   0:ac82d8b1f7c4
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add a
  
  $ sleep 1

shut down servers and restore environment:

  $ rm -R chgsock
  $ sleep 2
  $ CHGSOCKNAME=$OLDCHGSOCKNAME

check server log:

  $ cat log/server.log | filterlog
  YYYY/MM/DD HH:MM:SS (PID)> worker process exited (pid=...)
  YYYY/MM/DD HH:MM:SS (PID)> worker process exited (pid=...) (?)
  YYYY/MM/DD HH:MM:SS (PID)> init cached
  YYYY/MM/DD HH:MM:SS (PID)> id -R cached
  YYYY/MM/DD HH:MM:SS (PID)> loaded repo into cache: $TESTTMP/cached (in  ...s)
  YYYY/MM/DD HH:MM:SS (PID)> repo from cache: $TESTTMP/cached
  YYYY/MM/DD HH:MM:SS (PID)> ci -R cached -Am 'add a'
  YYYY/MM/DD HH:MM:SS (PID)> loaded repo into cache: $TESTTMP/cached (in  ...s)
  YYYY/MM/DD HH:MM:SS (PID)> repo from cache: $TESTTMP/cached
  YYYY/MM/DD HH:MM:SS (PID)> log -R cached
  YYYY/MM/DD HH:MM:SS (PID)> loaded repo into cache: $TESTTMP/cached (in  ...s)
  YYYY/MM/DD HH:MM:SS (PID)> clone cached cached2
  YYYY/MM/DD HH:MM:SS (PID)> id -R cached2
  YYYY/MM/DD HH:MM:SS (PID)> loaded repo into cache: $TESTTMP/cached2 (in  ...s)
  YYYY/MM/DD HH:MM:SS (PID)> log -R cached
  YYYY/MM/DD HH:MM:SS (PID)> loaded repo into cache: $TESTTMP/cached (in  ...s)

Test that -R is interpreted relative to --cwd.

  $ hg init repo1
  $ mkdir -p a/b
  $ hg init a/b/repo2
  $ printf "[alias]\ntest=repo1\n" >> repo1/.hg/hgrc
  $ printf "[alias]\ntest=repo2\n" >> a/b/repo2/.hg/hgrc
  $ cd a
  $ chg --cwd .. -R repo1 show alias.test
  repo1
  $ chg --cwd . -R b/repo2 show alias.test
  repo2
  $ cd ..

Test that chg works (sets to the user's actual LC_CTYPE) even when python
"coerces" the locale (py3.7+)

  $ cat > $TESTTMP/debugenv.py <<EOF
  > from mercurial import encoding
  > from mercurial import registrar
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > @command(b'debugenv', [], b'', norepo=True)
  > def debugenv(ui):
  >     for k in [b'LC_ALL', b'LC_CTYPE', b'LANG']:
  >         v = encoding.environ.get(k)
  >         if v is not None:
  >             ui.write(b'%s=%s\n' % (k, encoding.environ[k]))
  > EOF
(hg keeps python's modified LC_CTYPE, chg doesn't)
  $ (unset LC_ALL; unset LANG; LC_CTYPE= "$CHGHG" \
  >    --config extensions.debugenv=$TESTTMP/debugenv.py debugenv)
  LC_CTYPE=C.UTF-8 (py37 !)
  LC_CTYPE= (no-py37 !)
  $ (unset LC_ALL; unset LANG; LC_CTYPE= chg \
  >    --config extensions.debugenv=$TESTTMP/debugenv.py debugenv)
  LC_CTYPE=
  $ (unset LC_ALL; unset LANG; LC_CTYPE=unsupported_value chg \
  >    --config extensions.debugenv=$TESTTMP/debugenv.py debugenv)
  *cannot change locale* (glob) (?)
  LC_CTYPE=unsupported_value
  $ (unset LC_ALL; unset LANG; LC_CTYPE= chg \
  >    --config extensions.debugenv=$TESTTMP/debugenv.py debugenv)
  LC_CTYPE=
  $ LANG= LC_ALL= LC_CTYPE= chg \
  >    --config extensions.debugenv=$TESTTMP/debugenv.py debugenv
  LC_ALL=
  LC_CTYPE=
  LANG=

Profiling isn't permanently enabled or carried over between chg invocations that
share the same server
  $ cp $HGRCPATH.orig $HGRCPATH
  $ hg init $TESTTMP/profiling
  $ cd $TESTTMP/profiling
  $ filteredchg() {
  >   CHGDEBUG=1 chg "$@" 2>&1 | sed -rn 's_^No samples recorded.*$_Sample count: 0_; /Sample count/p; /start cmdserver/p'
  > }
  $ newchg() {
  >   chg --kill-chg-daemon
  >   filteredchg "$@" | egrep -v 'start cmdserver' || true
  > }
(--profile isn't permanently on just because it was specified when chg was
started)
  $ newchg log -r . --profile
  Sample count: * (glob)
  $ filteredchg log -r .
(enabling profiling via config works, even on the first chg command that starts
a cmdserver)
  $ cat >> $HGRCPATH <<EOF
  > [profiling]
  > type=stat
  > enabled=1
  > EOF
  $ newchg log -r .
  Sample count: * (glob)
  $ filteredchg log -r .
  Sample count: * (glob)
(test that we aren't accumulating more and more samples each run)
  $ cat > $TESTTMP/debugsleep.py <<EOF
  > import time
  > from mercurial import registrar
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > @command(b'debugsleep', [], b'', norepo=True)
  > def debugsleep(ui):
  >   start = time.time()
  >   x = 0
  >   while time.time() < start + 0.5:
  >     time.sleep(.1)
  >     x += 1
  >   ui.status(b'%d debugsleep iterations in %.03fs\n' % (x, time.time() - start))
  > EOF
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > debugsleep = $TESTTMP/debugsleep.py
  > EOF
  $ newchg debugsleep > run_1
  $ filteredchg debugsleep > run_2
  $ filteredchg debugsleep > run_3
  $ filteredchg debugsleep > run_4
FIXME: Run 4 should not be >3x Run 1's number of samples.
  $ "$PYTHON" <<EOF
  > r1 = int(open("run_1", "r").read().split()[-1])
  > r4 = int(open("run_4", "r").read().split()[-1])
  > print("Run 1: %d samples\nRun 4: %d samples\nRun 4 > 3 * Run 1: %s" %
  >       (r1, r4, r4 > (r1 * 3)))
  > EOF
  Run 1: * samples (glob)
  Run 4: * samples (glob)
  Run 4 > 3 * Run 1: False
(Disabling with --no-profile on the commandline still works, but isn't permanent)
  $ newchg log -r . --no-profile
  $ filteredchg log -r .
  Sample count: * (glob)
  $ filteredchg log -r . --no-profile
  $ filteredchg log -r .
  Sample count: * (glob)