view tests/test-import-eol.t @ 52092:e2311951b63a

tests: raise the default value for the various `devel.sync.*-timeout` configs

These are used in `mercurial.testing.wait_file()` to stall for a file to appear
in the filesystem, and raise an error if the file doesn't show up before the
timeout expires.

The default of 2s was way too low on Windows, especially when running tests in
parallel, and resulted in various timeouts in `test-dirstate-read-race.t`,
`test-dirstate-status-write-race.t`, and `test-clone-stream-revlog-split.t`.
The various `wait-on-file` invocations in the tests are inconsistent, and wait
anywhere from 5s - 20s.  I'm using 20s here because if everything is working,
the timeout won't matter.  Also with the default timeout being raised on Windows
in f4c038081561, both `HGTEST_TIMEOUT_DEFAULT` and `HGTEST_TIMEOUT` are 1440 in
the default case where the timeout is not specified on the command line of the
test runner, so the timing factor that is multipled with the value is 1,
resulting in no changes. (But if someone specified a lower value on the command
line, that would *lower* the timeout period used.)

  $ cat > makepatch.py <<EOF
  > import sys
  > f = open(sys.argv[2], 'wb')
  > w = f.write
  > w(b'test message\n')
  > w(b'diff --git a/a b/a\n')
  > w(b'--- a/a\n')
  > w(b'+++ b/a\n')
  > w(b'@@ -1,5 +1,5 @@\n')
  > w(b' a\n')
  > w(b'-bbb\r\n')
  > w(b'+yyyy\r\n')
  > w(b' cc\r\n')
  > w({'empty:lf': b' \n',
  >    'empty:crlf': b' \r\n',
  >    'empty:stripped-lf': b'\n',
  >    'empty:stripped-crlf': b'\r\n'}[sys.argv[1]])
  > w(b' d\n')
  > w(b'-e\n')
  > w(b'\\\\ No newline at end of file\n')
  > w(b'+z\r\n')
  > w(b'\\\\ No newline at end of file\r\n')
  > EOF

  $ hg init repo
  $ cd repo
  $ echo '\.diff' > .hgignore


Test different --eol values

  $ "$PYTHON" -c 'open("a", "wb").write(b"a\nbbb\ncc\n\nd\ne")'
  $ hg ci -Am adda
  adding .hgignore
  adding a
  $ "$PYTHON" ../makepatch.py empty:lf eol.diff
  $ "$PYTHON" ../makepatch.py empty:crlf eol-empty-crlf.diff
  $ "$PYTHON" ../makepatch.py empty:stripped-lf eol-empty-stripped-lf.diff
  $ "$PYTHON" ../makepatch.py empty:stripped-crlf eol-empty-stripped-crlf.diff

invalid eol

  $ hg --config patch.eol='LFCR' import eol.diff
  applying eol.diff
  abort: unsupported line endings type: LFCR
  [255]
  $ hg revert -a


force LF

  $ hg --traceback --config patch.eol='LF' import eol.diff
  applying eol.diff
  $ hg id
  9e4ef7b3d4af tip
  $ cat a
  a
  yyyy
  cc
  
  d
  e (no-eol)
  $ hg st

 (test empty-line variants: all of them should generate the same revision)

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-crlf.diff
  applying eol-empty-crlf.diff
  $ hg id
  9e4ef7b3d4af tip

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-stripped-lf.diff
  applying eol-empty-stripped-lf.diff
  $ hg id
  9e4ef7b3d4af tip

  $ hg up -qC 0
  $ hg --config patch.eol='LF' import eol-empty-stripped-crlf.diff
  applying eol-empty-stripped-crlf.diff
  $ hg id
  9e4ef7b3d4af tip

force CRLF

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg --traceback --config patch.eol='CRLF' import eol.diff
  applying eol.diff
  $ cat a
  a\r (esc)
  yyyy\r (esc)
  cc\r (esc)
  \r (esc)
  d\r (esc)
  e (no-eol)
  $ hg st


auto EOL on LF file

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg --traceback --config patch.eol='auto' import eol.diff
  applying eol.diff
  $ cat a
  a
  yyyy
  cc
  
  d
  e (no-eol)
  $ hg st


auto EOL on CRLF file

  $ "$PYTHON" -c 'open("a", "wb").write(b"a\r\nbbb\r\ncc\r\n\r\nd\r\ne")'
  $ hg commit -m 'switch EOLs in a'
  $ hg --traceback --config patch.eol='auto' import eol.diff
  applying eol.diff
  $ cat a
  a\r (esc)
  yyyy\r (esc)
  cc\r (esc)
  \r (esc)
  d\r (esc)
  e (no-eol)
  $ hg st


auto EOL on new file or source without any EOL

  $ "$PYTHON" -c 'open("noeol", "wb").write(b"noeol")'
  $ hg add noeol
  $ hg commit -m 'add noeol'
  $ "$PYTHON" -c 'open("noeol", "wb").write(b"noeol\r\nnoeol\n")'
  $ "$PYTHON" -c 'open("neweol", "wb").write(b"neweol\nneweol\r\n")'
  $ hg add neweol
  $ hg diff --git > noeol.diff
  $ hg revert --no-backup noeol neweol
  $ rm neweol
  $ hg --traceback --config patch.eol='auto' import -m noeol noeol.diff
  applying noeol.diff
  $ cat noeol
  noeol\r (esc)
  noeol
  $ cat neweol
  neweol
  neweol\r (esc)
  $ hg st


Test --eol and binary patches

  $ "$PYTHON" -c 'open("b", "wb").write(b"a\x00\nb\r\nd")'
  $ hg ci -Am addb
  adding b
  $ "$PYTHON" -c 'open("b", "wb").write(b"a\x00\nc\r\nd")'
  $ hg diff --git > bin.diff
  $ hg revert --no-backup b

binary patch with --eol

  $ hg import --config patch.eol='CRLF' -m changeb bin.diff
  applying bin.diff
  $ cat b
  a\x00 (esc)
  c\r (esc)
  d (no-eol)
  $ hg st
  $ cd ..