view tests/test-narrow-exchange.t @ 52092:e2311951b63a

tests: raise the default value for the various `devel.sync.*-timeout` configs

These are used in `mercurial.testing.wait_file()` to stall for a file to appear
in the filesystem, and raise an error if the file doesn't show up before the
timeout expires.

The default of 2s was way too low on Windows, especially when running tests in
parallel, and resulted in various timeouts in `test-dirstate-read-race.t`,
`test-dirstate-status-write-race.t`, and `test-clone-stream-revlog-split.t`.
The various `wait-on-file` invocations in the tests are inconsistent, and wait
anywhere from 5s - 20s.  I'm using 20s here because if everything is working,
the timeout won't matter.  Also with the default timeout being raised on Windows
in f4c038081561, both `HGTEST_TIMEOUT_DEFAULT` and `HGTEST_TIMEOUT` are 1440 in
the default case where the timeout is not specified on the command line of the
test runner, so the timing factor that is multipled with the value is 1,
resulting in no changes. (But if someone specified a lower value on the command
line, that would *lower* the timeout period used.)

#testcases lfs-on lfs-off

#if lfs-on
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > lfs =
  > EOF
#endif

  $ . "$TESTDIR/narrow-library.sh"

create full repo

  $ hg init master
  $ cd master
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF

  $ mkdir inside
  $ echo 1 > inside/f
  $ mkdir inside2
  $ echo 1 > inside2/f
  $ mkdir outside
  $ echo 1 > outside/f
  $ hg ci -Aqm 'initial'

  $ echo 2 > inside/f
  $ hg ci -qm 'inside 2'

  $ echo 2 > inside2/f
  $ hg ci -qm 'inside2 2'

  $ echo 2 > outside/f
  $ hg ci -qm 'outside 2'

  $ cd ..

  $ hg clone --narrow ssh://user@dummy/master narrow --include inside
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 2 changes to 1 files
  new changesets *:* (glob)
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone --narrow ssh://user@dummy/master narrow2 --include inside --include inside2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 2 files
  new changesets *:* (glob)
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Can push to wider repo if change does not affect paths in wider repo that are
not also in narrower repo

  $ cd narrow
  $ echo 3 > inside/f
  $ hg ci -m 'inside 3'
  $ hg push ssh://user@dummy/narrow2
  pushing to ssh://user@dummy/narrow2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

Can push to narrower repo if change affects only paths within remote's
narrow spec

  $ cd ../narrow2
  $ cat >> .hg/hgrc <<EOF
  > [narrow]
  > serveellipses=True
  > EOF
  $ hg co -r 'desc("inside 3")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 4 > inside/f
  $ hg ci -m 'inside 4'
  $ hg push ssh://user@dummy/narrow
  pushing to ssh://user@dummy/narrow
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

Can push to narrow repo if change affects only paths outside remote's
narrow spec

  $ echo 3 > inside2/f
  $ hg ci -m 'inside2 3'
TODO: this should be successful
  $ hg push ssh://user@dummy/narrow
  pushing to ssh://user@dummy/narrow
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: transaction abort!
  remote: rollback completed
  remote: abort: data/inside2/f@4a1aa07735e673e20c00fae80f40dc301ee30616: unknown parent (reporevlogstore !)
  remote: abort: data/inside2/f/index@4a1aa07735e6: no node (reposimplestore !)
  abort: stream ended unexpectedly (got 0 bytes, expected 4)
  [255]

Can pull from wider repo if change affects only paths outside remote's
narrow spec
  $ echo 4 > inside2/f
  $ hg ci -m 'inside2 4'
  $ hg log -G -T '{rev} {node|short} {files}\n'
  @  7 d78a96df731d inside2/f
  |
  o  6 8c26f5218962 inside2/f
  |
  o  5 ba3480e2f9de inside/f
  |
  o  4 4e5edd526618 inside/f
  |
  o  3 81e7e07b7ab0 outside/f
  |
  o  2 f3993b8c0c2b inside2/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ cd ../narrow
  $ hg log -G -T '{rev} {node|short} {files}\n'
  o  4 ba3480e2f9de inside/f
  |
  @  3 4e5edd526618 inside/f
  |
  o  2 81e7e07b7ab0 outside/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ hg pull ssh://user@dummy/narrow2
  pulling from ssh://user@dummy/narrow2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files
  new changesets d78a96df731d
  (run 'hg update' to get a working copy)

Check that the resulting history is valid in the full repo

  $ cd ../narrow2
  $ hg push ssh://user@dummy/master
  pushing to ssh://user@dummy/master
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 4 changesets with 4 changes to 2 files
  $ cd ../master
  $ hg verify -q

Can not push to wider repo if change affects paths in wider repo that are
not also in narrower repo
  $ cd ../master
  $ hg co -r 'desc("inside2 4")'
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 5 > inside2/f
  $ hg ci -m 'inside2 5'
  $ hg log -G -T '{rev} {node|short} {files}\n'
  @  8 5970befb64ba inside2/f
  |
  o  7 d78a96df731d inside2/f
  |
  o  6 8c26f5218962 inside2/f
  |
  o  5 ba3480e2f9de inside/f
  |
  o  4 4e5edd526618 inside/f
  |
  o  3 81e7e07b7ab0 outside/f
  |
  o  2 f3993b8c0c2b inside2/f
  |
  o  1 8cd66ca966b4 inside/f
  |
  o  0 c8057d6f53ab inside/f inside2/f outside/f
  
  $ cd ../narrow
  $ hg pull
  pulling from ssh://user@dummy/master
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files
  new changesets * (glob)
  (run 'hg update' to get a working copy)
TODO: this should tell the user that their narrow clone does not have the
necessary content to be able to push to the target

TODO: lfs shouldn't abort like this
  $ hg push ssh://user@dummy/narrow2 || true
  pushing to ssh://user@dummy/narrow2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 0 changes to 0 files (no-lfs-on !)
  remote: error: pretxnchangegroup.lfs hook raised an exception: inside2/f@f59b4e0218355383d2789196f1092abcf2262b0c: no match found (lfs-on !)
  remote: transaction abort! (lfs-on !)
  remote: rollback completed (lfs-on !)
  remote: abort: inside2/f@f59b4e0218355383d2789196f1092abcf2262b0c: no match found (lfs-on !)
  abort: stream ended unexpectedly (got 0 bytes, expected 4) (lfs-on !)