view tests/test-revert-interactive.t @ 52092:e2311951b63a

tests: raise the default value for the various `devel.sync.*-timeout` configs

These are used in `mercurial.testing.wait_file()` to stall for a file to appear
in the filesystem, and raise an error if the file doesn't show up before the
timeout expires.

The default of 2s was way too low on Windows, especially when running tests in
parallel, and resulted in various timeouts in `test-dirstate-read-race.t`,
`test-dirstate-status-write-race.t`, and `test-clone-stream-revlog-split.t`.
The various `wait-on-file` invocations in the tests are inconsistent, and wait
anywhere from 5s - 20s.  I'm using 20s here because if everything is working,
the timeout won't matter.  Also with the default timeout being raised on Windows
in f4c038081561, both `HGTEST_TIMEOUT_DEFAULT` and `HGTEST_TIMEOUT` are 1440 in
the default case where the timeout is not specified on the command line of the
test runner, so the timing factor that is multipled with the value is 1,
resulting in no changes. (But if someone specified a lower value on the command
line, that would *lower* the timeout period used.)

Revert interactive tests
1 add and commit file f
2 add commit file folder1/g
3 add and commit file folder2/h
4 add and commit file folder1/i
5 commit change to file f
6 commit changes to files folder1/g folder2/h
7 commit changes to files folder1/g folder2/h
8 revert interactive to commit id 2 (line 3 above), check that folder1/i is removed and
9 make workdir match 7
10 run the same test than 8 from within folder1 and check same expectations

  $ cat <<EOF >> $HGRCPATH
  > [ui]
  > interactive = true
  > [extensions]
  > record =
  > purge = 
  > EOF


  $ mkdir -p a/folder1 a/folder2
  $ cd a
  $ hg init
  >>> open('f', 'wb').write(b"1\n2\n3\n4\n5\n") and None
  $ hg add f ; hg commit -m "adding f"
  $ cat f > folder1/g ; hg add folder1/g ; hg commit -m "adding folder1/g"
  $ cat f > folder2/h ; hg add folder2/h ; hg commit -m "adding folder2/h"
  $ cat f > folder1/i ; hg add folder1/i ; hg commit -m "adding folder1/i"
  >>> open('f', 'wb').write(b"a\n1\n2\n3\n4\n5\nb\n") and None
  $ hg commit -m "modifying f"
  >>> open('folder1/g', 'wb').write(b"c\n1\n2\n3\n4\n5\nd\n") and None
  $ hg commit -m "modifying folder1/g"
  >>> open('folder2/h', 'wb').write(b"e\n1\n2\n3\n4\n5\nf\n") and None
  $ hg commit -m "modifying folder2/h"
  $ hg tip
  changeset:   6:59dd6e4ab63a
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modifying folder2/h
  
  $ hg revert -i -r 2 --all -- << EOF
  > y
  > y
  > y
  > y
  > y
  > ?
  > y
  > n
  > n
  > EOF
  remove added file folder1/i (Yn)? y
  removing folder1/i
  diff --git a/f b/f
  2 hunks, 2 lines changed
  examine changes to 'f'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -a
   1
   2
   3
   4
   5
  apply change 1/6 to 'f'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -b
  apply change 2/6 to 'f'?
  (enter ? for help) [Ynesfdaq?] y
  
  diff --git a/folder1/g b/folder1/g
  2 hunks, 2 lines changed
  examine changes to 'folder1/g'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -c
   1
   2
   3
   4
   5
  apply change 3/6 to 'folder1/g'?
  (enter ? for help) [Ynesfdaq?] ?
  
  y - yes, apply this change
  n - no, skip this change
  e - edit this change manually
  s - skip remaining changes to this file
  f - apply remaining changes to this file
  d - done, skip remaining changes and files
  a - apply all changes to all remaining files
  q - quit, applying no changes
  ? - ? (display help)
  apply change 3/6 to 'folder1/g'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -d
  apply change 4/6 to 'folder1/g'?
  (enter ? for help) [Ynesfdaq?] n
  
  diff --git a/folder2/h b/folder2/h
  2 hunks, 2 lines changed
  examine changes to 'folder2/h'?
  (enter ? for help) [Ynesfdaq?] n
  
  reverting f
  reverting folder1/g
  $ cat f
  1
  2
  3
  4
  5
  $ cat folder1/g
  1
  2
  3
  4
  5
  d
  $ cat folder2/h
  e
  1
  2
  3
  4
  5
  f

Test that --interactive lift the need for --all

  $ echo q | hg revert -i -r 2
  diff --git a/folder1/g b/folder1/g
  1 hunks, 1 lines changed
  examine changes to 'folder1/g'?
  (enter ? for help) [Ynesfdaq?] q
  
  abort: user quit
  [250]
  $ ls folder1/
  g

Test that a noop revert doesn't do an unnecessary backup
  $ (echo n) | hg revert -i -r 2 folder1/g
  diff --git a/folder1/g b/folder1/g
  1 hunks, 1 lines changed
  @@ -3,4 +3,3 @@
   3
   4
   5
  -d
  apply this change to 'folder1/g'?
  (enter ? for help) [Ynesfdaq?] n
  
  $ ls folder1/
  g

Test --no-backup
  $ (echo y) | hg revert -i -C -r 2 folder1/g
  diff --git a/folder1/g b/folder1/g
  1 hunks, 1 lines changed
  @@ -3,4 +3,3 @@
   3
   4
   5
  -d
  apply this change to 'folder1/g'?
  (enter ? for help) [Ynesfdaq?] y
  
  $ ls folder1/
  g
  >>> open('folder1/g', 'wb').write(b"1\n2\n3\n4\n5\nd\n") and None


  $ hg update -C 6
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg revert -i -r 2 --all -- << EOF
  > n
  > y
  > y
  > y
  > y
  > y
  > n
  > n
  > EOF
  remove added file folder1/i (Yn)? n
  diff --git a/f b/f
  2 hunks, 2 lines changed
  examine changes to 'f'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -a
   1
   2
   3
   4
   5
  apply change 1/6 to 'f'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -b
  apply change 2/6 to 'f'?
  (enter ? for help) [Ynesfdaq?] y
  
  diff --git a/folder1/g b/folder1/g
  2 hunks, 2 lines changed
  examine changes to 'folder1/g'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -1,6 +1,5 @@
  -c
   1
   2
   3
   4
   5
  apply change 3/6 to 'folder1/g'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -d
  apply change 4/6 to 'folder1/g'?
  (enter ? for help) [Ynesfdaq?] n
  
  diff --git a/folder2/h b/folder2/h
  2 hunks, 2 lines changed
  examine changes to 'folder2/h'?
  (enter ? for help) [Ynesfdaq?] n
  
  reverting f
  reverting folder1/g
  $ cat f
  1
  2
  3
  4
  5
  $ cat folder1/g
  1
  2
  3
  4
  5
  d
  $ cat folder2/h
  e
  1
  2
  3
  4
  5
  f
  $ hg st
  M f
  M folder1/g
  $ hg revert --interactive f << EOF
  > ?
  > y
  > n
  > n
  > EOF
  diff --git a/f b/f
  2 hunks, 2 lines changed
  @@ -1,6 +1,5 @@
  -a
   1
   2
   3
   4
   5
  discard change 1/2 to 'f'?
  (enter ? for help) [Ynesfdaq?] ?
  
  y - yes, discard this change
  n - no, skip this change
  e - edit this change manually
  s - skip remaining changes to this file
  f - discard remaining changes to this file
  d - done, skip remaining changes and files
  a - discard all changes to all remaining files
  q - quit, discarding no changes
  ? - ? (display help)
  discard change 1/2 to 'f'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -2,6 +1,5 @@
   1
   2
   3
   4
   5
  -b
  discard change 2/2 to 'f'?
  (enter ? for help) [Ynesfdaq?] n
  
  $ hg st
  M f
  M folder1/g
  ? f.orig
  $ cat f
  a
  1
  2
  3
  4
  5
  $ cat f.orig
  1
  2
  3
  4
  5
  $ rm f.orig

Patterns

  $ hg revert -i 'glob:f*' << EOF
  > y
  > n
  > EOF
  diff --git a/f b/f
  1 hunks, 1 lines changed
  examine changes to 'f'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -4,4 +4,3 @@
   3
   4
   5
  -b
  discard this change to 'f'?
  (enter ? for help) [Ynesfdaq?] n
  

  $ hg update -C .
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Check editing files newly added by a revert

1) Create a dummy editor changing 1 to 42
  $ cat > $TESTTMP/editor.sh << '__EOF__'
  > cat "$1"  | sed "s/1/42/g"  > tt
  > mv tt  "$1"
  > __EOF__

2) Add k
  $ printf "1\n" > k
  $ hg add k
  $ hg commit -m "add k"

3) Use interactive revert with editing (replacing +1 with +42):
  $ printf "0\n2\n" > k
  $ HGEDITOR="\"sh\" \"${TESTTMP}/editor.sh\"" hg revert -i  <<EOF
  > y
  > e
  > EOF
  diff --git a/k b/k
  1 hunks, 2 lines changed
  examine changes to 'k'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -1,1 +1,2 @@
  -1
  +0
  +2
  discard this change to 'k'?
  (enter ? for help) [Ynesfdaq?] e
  
  reverting k
  $ cat k
  42

  $ hg update -C .
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg purge
  $ touch newfile
  $ hg add newfile
  $ hg status
  A newfile
  $ hg revert -i <<EOF
  > n
  > EOF
  forget added file newfile (Yn)? n
  $ hg status
  A newfile
  $ hg revert -i <<EOF
  > y
  > EOF
  forget added file newfile (Yn)? y
  forgetting newfile
  $ hg status
  ? newfile
  $ rm newfile
  $ hg up 0
  1 files updated, 0 files merged, 4 files removed, 0 files unresolved
  $ hg status
  $ hg revert -r 2 -i <<EOF
  > y
  > n
  > EOF
  add new file folder1/g (Yn)? y
  adding folder1/g
  add new file folder2/h (Yn)? n
  $ hg status
  A folder1/g

When a line without EOL is selected during "revert -i" (issue5651)

  $ hg init $TESTTMP/revert-i-eol
  $ cd $TESTTMP/revert-i-eol
  $ echo 0 > a
  $ hg ci -qAm 0
  $ printf 1 >> a
  $ hg ci -qAm 1
  $ cat a
  0
  1 (no-eol)

  $ hg revert -ir'.^' <<EOF
  > y
  > y
  > EOF
  diff --git a/a b/a
  1 hunks, 1 lines changed
  examine changes to 'a'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -1,2 +1,1 @@
   0
  -1
  \ No newline at end of file
  apply this change to 'a'?
  (enter ? for help) [Ynesfdaq?] y
  
  reverting a
  $ cat a
  0

When specified pattern does not exist, we should exit early (issue5789).

  $ hg files
  a
  $ hg rev b
  b: no such file in rev b40d1912accf
  $ hg rev -i b
  b: no such file in rev b40d1912accf

  $ cd ..

Prompt before undeleting file(issue6008)
  $ hg init repo
  $ cd repo
  $ echo a > a
  $ hg ci -qAm a
  $ hg rm a
  $ hg revert -i<<EOF
  > y
  > EOF
  add back removed file a (Yn)? y
  undeleting a
  $ ls -A
  .hg
  a
  $ hg rm a
  $ hg revert -i<<EOF
  > n
  > EOF
  add back removed file a (Yn)? n
  $ ls -A
  .hg
  $ hg revert -a
  undeleting a
  $ cd ..

Test "keep" mode

  $ cat <<EOF >> $HGRCPATH
  > [experimental]
  > revert.interactive.select-to-keep = true
  > EOF

  $ cd repo
  $ printf "x\na\ny\n" > a
  $ hg diff
  diff -r cb9a9f314b8b a
  --- a/a	Thu Jan 01 00:00:00 1970 +0000
  +++ b/a	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,1 +1,3 @@
  +x
   a
  +y
  $ cat > $TESTTMP/editor.sh << '__EOF__'
  > echo "+new line" >> "$1"
  > __EOF__

  $ HGEDITOR="\"sh\" \"${TESTTMP}/editor.sh\"" hg revert -i  <<EOF
  > y
  > n
  > e
  > EOF
  diff --git a/a b/a
  2 hunks, 2 lines changed
  examine changes to 'a'?
  (enter ? for help) [Ynesfdaq?] y
  
  @@ -1,1 +1,2 @@
  +x
   a
  keep change 1/2 to 'a'?
  (enter ? for help) [Ynesfdaq?] n
  
  @@ -1,1 +2,2 @@
   a
  +y
  keep change 2/2 to 'a'?
  (enter ? for help) [Ynesfdaq?] e
  
  reverting a
  $ cat a
  a
  y
  new line