view tests/test-conflict.t @ 36754:e3c228b4510d stable

wireproto: declare operation type for most commands (BC) (SEC)

The permissions model of hgweb relies on a dictionary to declare
the operation associated with each command - either "pull" or
"push." This dictionary was established by d3147b4e3e8a in 2008.
Unfortunately, we neglected to update this dictionary as new
wire protocol commands were introduced.

This commit defines the operations of most wire protocol commands
in the permissions dictionary. The "batch" command is omitted because
it is special and requires a more complex solution.

Since permissions checking is skipped unless a command has an entry in
this dictionary (this security issue will be addressed in a subsequent
commit), the practical effect of this change is that various wire
protocol commands now HTTP 401 if web.deny_read or web.allow-pull,
etc are set to deny access. This is reflected by test changes. Note
how various `hg pull` and `hg push` operations now fail before
discovery. (They fail during the initial "capabilities" request.)

This change fixes a security issue where built-in wire protocol
commands would return repository data even if the web config were
configured to deny access to that data.

I'm on the fence as to whether we should HTTP 401 the capabilities
request. On one hand, it can expose repository metadata and can tell
callers things like what version of Mercurial the server is running.
On the other hand, a client may need to know the capabilities in order
to authenticate in a follow-up request. It appears that Mercurial
clients handle the HTTP 401 on *any* protocol request, so we should
be OK sending a 401 for "capabilities." But if this causes problems,
it should be possible to allow "capabilities" to always work.

.. bc::

   Various read-only wire protocol commands now return HTTP 401
   Unauthorized if the hgweb configuration denies read/pull access to
   the repository.

   Previously, various wire protocol commands would still work and
   return data if read access was disabled.

  $ hg init
  $ cat << EOF > a
  > Small Mathematical Series.
  > One
  > Two
  > Three
  > Four
  > Five
  > Hop we are done.
  > EOF
  $ hg add a
  $ hg commit -m ancestor
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3
  > 4
  > 5
  > Hop we are done.
  > EOF
  $ hg commit -m branch1
  $ hg co 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3
  > 6
  > 8
  > Hop we are done.
  > EOF
  $ hg commit -m branch2
  created new head

  $ hg merge 1
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ hg id
  618808747361+c0c68e4fe667+ tip

  $ echo "[commands]" >> $HGRCPATH
  $ echo "status.verbose=true" >> $HGRCPATH
  $ hg status
  M a
  ? a.orig
  # The repository is in an unfinished *merge* state.
  
  # Unresolved merge conflicts:
  # 
  #     a
  # 
  # To mark files as resolved:  hg resolve --mark FILE
  
  # To continue:                hg commit
  # To abort:                   hg update --clean .    (warning: this will discard uncommitted changes)
  

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: 618808747361 - test: branch2
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    c0c68e4fe667 - test: branch1
  Hop we are done.

  $ hg status --config commands.status.verbose=0
  M a
  ? a.orig

Verify custom conflict markers

  $ hg up -q --clean .
  $ cat <<EOF >> .hg/hgrc
  > [ui]
  > mergemarkertemplate = '{author} {rev}'
  > EOF

  $ hg merge 1
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: test 2
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    test 1
  Hop we are done.

Verify line splitting of custom conflict marker which causes multiple lines

  $ hg up -q --clean .
  $ cat >> .hg/hgrc <<EOF
  > [ui]
  > mergemarkertemplate={author} {rev}\nfoo\nbar\nbaz
  > EOF

  $ hg -q merge 1
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: test 2
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    test 1
  Hop we are done.

Verify line trimming of custom conflict marker using multi-byte characters

  $ hg up -q --clean .
  $ $PYTHON <<EOF
  > fp = open('logfile', 'w')
  > fp.write('12345678901234567890123456789012345678901234567890' +
  >          '1234567890') # there are 5 more columns for 80 columns
  > 
  > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
  > fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
  > 
  > fp.close()
  > EOF
  $ hg add logfile
  $ hg --encoding utf-8 commit --logfile logfile

  $ cat >> .hg/hgrc <<EOF
  > [ui]
  > mergemarkertemplate={desc|firstline}
  > EOF

  $ hg -q --encoding utf-8 merge 1
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: 1234567890123456789012345678901234567890123456789012345...
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    branch1
  Hop we are done.

Verify basic conflict markers

  $ hg up -q --clean 2
  $ printf "\n[ui]\nmergemarkers=basic\n" >> .hg/hgrc

  $ hg merge 1
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy
  6
  8
  =======
  4
  5
  >>>>>>> merge rev
  Hop we are done.

internal:merge3

  $ hg up -q --clean .

  $ hg merge 1 --tool internal:merge3
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ cat a
  Small Mathematical Series.
  <<<<<<< working copy
  1
  2
  3
  6
  8
  ||||||| base
  One
  Two
  Three
  Four
  Five
  =======
  1
  2
  3
  4
  5
  >>>>>>> merge rev
  Hop we are done.

Add some unconflicting changes on each head, to make sure we really
are merging, unlike :local and :other

  $ hg up -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "e0693e20f496: 123456789012345678901234567890123456789012345678901234567890????"
  1 other heads for branch "default"
  $ printf "\n\nEnd of file\n" >> a
  $ hg ci -m "Add some stuff at the end"
  $ hg up -r 1
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ printf "Start of file\n\n\n" > tmp
  $ cat a >> tmp
  $ mv tmp a
  $ hg ci -m "Add some stuff at the beginning"

Now test :merge-other and :merge-local

  $ hg merge
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  1 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg resolve --tool :merge-other a
  merging a
  (no more unresolved files)
  $ cat a
  Start of file
  
  
  Small Mathematical Series.
  1
  2
  3
  6
  8
  Hop we are done.
  
  
  End of file

  $ hg up -C
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  updated to "18b51d585961: Add some stuff at the beginning"
  1 other heads for branch "default"
  $ hg merge --tool :merge-local
  merging a
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ cat a
  Start of file
  
  
  Small Mathematical Series.
  1
  2
  3
  4
  5
  Hop we are done.
  
  
  End of file