view tests/test-rebase-pull.t @ 36754:e3c228b4510d stable

wireproto: declare operation type for most commands (BC) (SEC)

The permissions model of hgweb relies on a dictionary to declare
the operation associated with each command - either "pull" or
"push." This dictionary was established by d3147b4e3e8a in 2008.
Unfortunately, we neglected to update this dictionary as new
wire protocol commands were introduced.

This commit defines the operations of most wire protocol commands
in the permissions dictionary. The "batch" command is omitted because
it is special and requires a more complex solution.

Since permissions checking is skipped unless a command has an entry in
this dictionary (this security issue will be addressed in a subsequent
commit), the practical effect of this change is that various wire
protocol commands now HTTP 401 if web.deny_read or web.allow-pull,
etc are set to deny access. This is reflected by test changes. Note
how various `hg pull` and `hg push` operations now fail before
discovery. (They fail during the initial "capabilities" request.)

This change fixes a security issue where built-in wire protocol
commands would return repository data even if the web config were
configured to deny access to that data.

I'm on the fence as to whether we should HTTP 401 the capabilities
request. On one hand, it can expose repository metadata and can tell
callers things like what version of Mercurial the server is running.
On the other hand, a client may need to know the capabilities in order
to authenticate in a follow-up request. It appears that Mercurial
clients handle the HTTP 401 on *any* protocol request, so we should
be OK sending a 401 for "capabilities." But if this causes problems,
it should be possible to allow "capabilities" to always work.

.. bc::

   Various read-only wire protocol commands now return HTTP 401
   Unauthorized if the hgweb configuration denies read/pull access to
   the repository.

   Previously, various wire protocol commands would still work and
   return data if read access was disabled.

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > rebase=
  > histedit=
  > 
  > [alias]
  > tglog = log -G --template "{rev}: {node|short} '{desc}' {branches}\n"
  > EOF


  $ hg init a
  $ cd a

  $ echo C1 > C1
  $ hg ci -Am C1
  adding C1

  $ echo C2 > C2
  $ hg ci -Am C2
  adding C2

  $ cd ..

  $ hg clone a b
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone a c
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd b

  $ echo L1 > L1
  $ hg ci -Am L1
  adding L1


  $ cd ../a

  $ echo R1 > R1
  $ hg ci -Am R1
  adding R1


  $ cd ../b

Now b has one revision to be pulled from a:

  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 77ae9631bcca
  rebasing 2:ff8d69a621f9 "L1"
  saved backup bundle to $TESTTMP/b/.hg/strip-backup/ff8d69a621f9-160fa373-rebase.hg

  $ hg tglog
  @  3: d80cc2da061e 'L1'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
Re-run:

  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  no changes found

Abort pull early if working dir is not clean:

  $ echo L1-mod > L1
  $ hg pull --rebase
  abort: uncommitted changes
  (cannot pull with rebase: please commit or shelve your changes first)
  [255]
  $ hg update --clean --quiet

Abort pull early if another operation (histedit) is in progress:

  $ hg histedit . -q --commands - << EOF
  > edit d80cc2da061e histedit: generate unfinished state
  > EOF
  Editing (d80cc2da061e), you may commit or record as needed now.
  (hg histedit --continue to resume)
  [1]
  $ hg pull --rebase
  abort: histedit in progress
  (use 'hg histedit --continue' or 'hg histedit --abort')
  [255]
  $ hg histedit --abort --quiet

Abort pull early with pending uncommitted merge:

  $ cd ..
  $ hg clone --noupdate c d
  $ cd d
  $ hg tglog
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ hg update --quiet 0
  $ echo M1 > M1
  $ hg commit --quiet -Am M1
  $ hg update --quiet 1
  $ hg merge 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg pull --rebase
  abort: outstanding uncommitted merge
  (cannot pull with rebase: please commit or shelve your changes first)
  [255]
  $ hg update --clean --quiet

Abort pull early with unclean subrepo:
  $ echo s = s > .hgsub
  $ hg add .hgsub
  $ hg init s
  $ hg commit -m "generated a subrepo"
  $ echo a > s/a
  $ hg -R s add s/a
  $ hg pull --rebase
  abort: uncommitted changes in subrepository "s"
  (cannot pull with rebase: please commit or shelve your changes first)
  [255]

Invoke pull --rebase and nothing to rebase:

  $ cd ../c

  $ hg book norebase
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 77ae9631bcca
  nothing to rebase - updating instead
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updating bookmark norebase

  $ hg tglog -l 1
  @  2: 77ae9631bcca 'R1'
  |
  ~

pull --rebase --update should ignore --update:

  $ hg pull --rebase --update
  pulling from $TESTTMP/a
  searching for changes
  no changes found

pull --rebase doesn't update if nothing has been pulled:

  $ hg up -q 1

  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  no changes found

  $ hg tglog -l 1
  o  2: 77ae9631bcca 'R1'
  |
  ~

  $ cd ..

pull --rebase works when a specific revision is pulled (issue3619)

  $ cd a
  $ hg tglog
  @  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ echo R2 > R2
  $ hg ci -Am R2
  adding R2
  $ echo R3 > R3
  $ hg ci -Am R3
  adding R3
  $ cd ../c
  $ hg tglog
  o  2: 77ae9631bcca 'R1'
  |
  @  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ echo L1 > L1
  $ hg ci -Am L1
  adding L1
  created new head
  $ hg pull --rev tip --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 31cd3a05214e:770a61882ace
  rebasing 3:ff8d69a621f9 "L1"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/ff8d69a621f9-160fa373-rebase.hg
  $ hg tglog
  @  5: 518d153c0ba3 'L1'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
pull --rebase works with bundle2 turned on

  $ cd ../a
  $ echo R4 > R4
  $ hg ci -Am R4
  adding R4
  $ hg tglog
  @  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ cd ../c
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 00e3b7781125
  rebasing 5:518d153c0ba3 "L1"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/518d153c0ba3-73407f14-rebase.hg
  $ hg tglog
  @  6: 0d0727eb7ce0 'L1'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  

pull --rebase only update if there is nothing to rebase

  $ cd ../a
  $ echo R5 > R5
  $ hg ci -Am R5
  adding R5
  $ hg tglog
  @  6: 88dd24261747 'R5'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ cd ../c
  $ echo L2 > L2
  $ hg ci -Am L2
  adding L2
  $ hg up 'desc(L1)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 88dd24261747
  rebasing 6:0d0727eb7ce0 "L1"
  rebasing 7:c1f58876e3bf "L2"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/0d0727eb7ce0-ef61ccb2-rebase.hg
  $ hg tglog
  o  8: 6dc0ea5dcf55 'L2'
  |
  @  7: 864e0a2d2614 'L1'
  |
  o  6: 88dd24261747 'R5'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  

pull --rebase update (no rebase) use proper update:

- warn about other head.

  $ cd ../a
  $ echo R6 > R6
  $ hg ci -Am R6
  adding R6
  $ cd ../c
  $ hg up 'desc(R5)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 65bc164c1d9b
  nothing to rebase - updating instead
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "65bc164c1d9b: R6"
  1 other heads for branch "default"
  $ hg tglog
  @  9: 65bc164c1d9b 'R6'
  |
  | o  8: 6dc0ea5dcf55 'L2'
  | |
  | o  7: 864e0a2d2614 'L1'
  |/
  o  6: 88dd24261747 'R5'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  

Multiple pre-existing heads on the branch
-----------------------------------------

Pull bring content, but nothing on the current branch, we should not consider
pre-existing heads.

  $ cd ../a
  $ hg branch unrelatedbranch
  marked working directory as branch unrelatedbranch
  (branches are permanent and global, did you want a bookmark?)
  $ echo B1 > B1
  $ hg commit -Am B1
  adding B1
  $ cd ../c
  $ hg up 'desc(L2)'
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 39c381359968
  nothing to rebase

There is two local heads and we pull a third one.
The second local head should not confuse the `hg pull rebase`.

  $ hg up 'desc(R6)'
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo M1 > M1
  $ hg commit -Am M1
  adding M1
  $ cd ../a
  $ hg up 'desc(R6)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo R7 > R7
  $ hg commit -Am R7
  adding R7
  $ cd ../c
  $ hg up 'desc(L2)'
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets f7d3e42052f9
  rebasing 7:864e0a2d2614 "L1"
  rebasing 8:6dc0ea5dcf55 "L2"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/864e0a2d2614-2f72c89c-rebase.hg
  $ hg tglog
  @  12: 3603a865eea0 'L2'
  |
  o  11: bcc8a9cd04bf 'L1'
  |
  o  10: f7d3e42052f9 'R7'
  |
  | o  9: 41fab4eef82f 'M1'
  |/
  | o  8: 39c381359968 'B1' unrelatedbranch
  |/
  o  7: 65bc164c1d9b 'R6'
  |
  o  6: 88dd24261747 'R5'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'