view tests/test-rename-dir-merge.t @ 36754:e3c228b4510d stable

wireproto: declare operation type for most commands (BC) (SEC)

The permissions model of hgweb relies on a dictionary to declare
the operation associated with each command - either "pull" or
"push." This dictionary was established by d3147b4e3e8a in 2008.
Unfortunately, we neglected to update this dictionary as new
wire protocol commands were introduced.

This commit defines the operations of most wire protocol commands
in the permissions dictionary. The "batch" command is omitted because
it is special and requires a more complex solution.

Since permissions checking is skipped unless a command has an entry in
this dictionary (this security issue will be addressed in a subsequent
commit), the practical effect of this change is that various wire
protocol commands now HTTP 401 if web.deny_read or web.allow-pull,
etc are set to deny access. This is reflected by test changes. Note
how various `hg pull` and `hg push` operations now fail before
discovery. (They fail during the initial "capabilities" request.)

This change fixes a security issue where built-in wire protocol
commands would return repository data even if the web config were
configured to deny access to that data.

I'm on the fence as to whether we should HTTP 401 the capabilities
request. On one hand, it can expose repository metadata and can tell
callers things like what version of Mercurial the server is running.
On the other hand, a client may need to know the capabilities in order
to authenticate in a follow-up request. It appears that Mercurial
clients handle the HTTP 401 on *any* protocol request, so we should
be OK sending a 401 for "capabilities." But if this causes problems,
it should be possible to allow "capabilities" to always work.

.. bc::

   Various read-only wire protocol commands now return HTTP 401
   Unauthorized if the hgweb configuration denies read/pull access to
   the repository.

   Previously, various wire protocol commands would still work and
   return data if read access was disabled.

  $ hg init t
  $ cd t

  $ mkdir a
  $ echo foo > a/a
  $ echo bar > a/b
  $ hg ci -Am "0"
  adding a/a
  adding a/b

  $ hg co -C 0
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg mv a b
  moving a/a to b/a
  moving a/b to b/b
  $ hg ci -m "1 mv a/ b/"

  $ hg co -C 0
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo baz > a/c
  $ echo quux > a/d
  $ hg add a/c
  $ hg ci -m "2 add a/c"
  created new head

  $ hg merge --debug 1
    searching for copies back to rev 1
    unmatched files in local:
     a/c
    unmatched files in other:
     b/a
     b/b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a/a' -> dst: 'b/a' 
     src: 'a/b' -> dst: 'b/b' 
    checking for directory renames
     discovered dir src: 'a/' -> dst: 'b/'
     pending file src: 'a/c' -> dst: 'b/c'
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: f9b20c0d4c51, local: ce36d17b18fb+, remote: 397f8b00a740
   a/a: other deleted -> r
  removing a/a
   a/b: other deleted -> r
  removing a/b
   b/a: remote created -> g
  getting b/a
   b/b: remote created -> g
  getting b/b
   b/c: remote directory rename - move from a/c -> dm
  moving a/c to b/c
  3 files updated, 0 files merged, 2 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ echo a/* b/*
  a/d b/a b/b b/c
  $ hg st -C
  M b/a
  M b/b
  A b/c
    a/c
  R a/a
  R a/b
  R a/c
  ? a/d
  $ hg ci -m "3 merge 2+1"
  $ hg debugrename b/c
  b/c renamed from a/c:354ae8da6e890359ef49ade27b68bbc361f3ca88

  $ hg co -C 1
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge --debug 2
    searching for copies back to rev 1
    unmatched files in local:
     b/a
     b/b
    unmatched files in other:
     a/c
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a/a' -> dst: 'b/a' 
     src: 'a/b' -> dst: 'b/b' 
    checking for directory renames
     discovered dir src: 'a/' -> dst: 'b/'
     pending file src: 'a/c' -> dst: 'b/c'
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: f9b20c0d4c51, local: 397f8b00a740+, remote: ce36d17b18fb
  starting 4 threads for background file closing (?)
   b/c: local directory rename - get from a/c -> dg
  getting a/c to b/c
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ echo a/* b/*
  a/d b/a b/b b/c
  $ hg st -C
  A b/c
    a/c
  ? a/d
  $ hg ci -m "4 merge 1+2"
  created new head
  $ hg debugrename b/c
  b/c renamed from a/c:354ae8da6e890359ef49ade27b68bbc361f3ca88

Local directory rename with conflicting file added in remote source directory
and untracked in local target directory.

  $ hg co -qC 1
  $ echo target > b/c
  $ hg merge 2
  b/c: untracked file differs
  abort: untracked files in working directory differ from files in requested revision
  [255]
  $ cat b/c
  target
but it should succeed if the content matches
  $ hg cat -r 2 a/c > b/c
  $ hg merge 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st -C
  A b/c
    a/c
  ? a/d

Local directory rename with conflicting file added in remote source directory
and committed in local target directory.

  $ hg co -qC 1
  $ echo target > b/c
  $ hg add b/c
  $ hg commit -qm 'new file in target directory'
  $ hg merge 2
  merging b/c and a/c to b/c
  warning: conflicts while merging b/c! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg st -A
  M b/c
    a/c
  ? a/d
  ? b/c.orig
  C b/a
  C b/b
  $ cat b/c
  <<<<<<< working copy: f1c50ca4f127 - test: new file in target directory
  target
  =======
  baz
  >>>>>>> merge rev:    ce36d17b18fb - test: 2 add a/c
  $ rm b/c.orig

Remote directory rename with conflicting file added in remote target directory
and committed in local source directory.

  $ hg co -qC 2
  $ hg st -A
  ? a/d
  C a/a
  C a/b
  C a/c
  $ hg merge 5
  merging a/c and b/c to b/c
  warning: conflicts while merging b/c! (edit, then use 'hg resolve --mark')
  2 files updated, 0 files merged, 2 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg st -A
  M b/a
  M b/b
  M b/c
    a/c
  R a/a
  R a/b
  R a/c
  ? a/d
  ? b/c.orig
  $ cat b/c
  <<<<<<< working copy: ce36d17b18fb - test: 2 add a/c
  baz
  =======
  target
  >>>>>>> merge rev:    f1c50ca4f127 - test: new file in target directory

Second scenario with two repos:

  $ cd ..
  $ hg init r1
  $ cd r1
  $ mkdir a
  $ echo foo > a/f
  $ hg add a
  adding a/f
  $ hg ci -m "a/f == foo"
  $ cd ..

  $ hg clone r1 r2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd r2
  $ hg mv a b
  moving a/f to b/f
  $ echo foo1 > b/f
  $ hg ci -m" a -> b, b/f == foo1"
  $ cd ..

  $ cd r1
  $ mkdir a/aa
  $ echo bar > a/aa/g
  $ hg add a/aa
  adding a/aa/g
  $ hg ci -m "a/aa/g"
  $ hg pull ../r2
  pulling from ../r2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 7d51ed18da25
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ hg merge
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ hg st -C
  M b/f
  A b/aa/g
    a/aa/g
  R a/aa/g
  R a/f

  $ cd ..

Test renames to separate directories

  $ hg init a
  $ cd a
  $ mkdir a
  $ touch a/s
  $ touch a/t
  $ hg ci -Am0
  adding a/s
  adding a/t

Add more files

  $ touch a/s2
  $ touch a/t2
  $ hg ci -Am1
  adding a/s2
  adding a/t2

Do moves on a branch

  $ hg up 0
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ mkdir s
  $ mkdir t
  $ hg mv a/s s
  $ hg mv a/t t
  $ hg ci -Am2
  created new head
  $ hg st --copies --change .
  A s/s
    a/s
  A t/t
    a/t
  R a/s
  R a/t

Merge shouldn't move s2, t2

  $ hg merge
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M a/s2
  M a/t2

Try the merge in the other direction. It may or may not be appropriate for
status to list copies here.

  $ hg up -C 1
  4 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg merge
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M s/s
  M t/t
  R a/s
  R a/t