view tests/test-strip-cross.t @ 36754:e3c228b4510d stable

wireproto: declare operation type for most commands (BC) (SEC)

The permissions model of hgweb relies on a dictionary to declare
the operation associated with each command - either "pull" or
"push." This dictionary was established by d3147b4e3e8a in 2008.
Unfortunately, we neglected to update this dictionary as new
wire protocol commands were introduced.

This commit defines the operations of most wire protocol commands
in the permissions dictionary. The "batch" command is omitted because
it is special and requires a more complex solution.

Since permissions checking is skipped unless a command has an entry in
this dictionary (this security issue will be addressed in a subsequent
commit), the practical effect of this change is that various wire
protocol commands now HTTP 401 if web.deny_read or web.allow-pull,
etc are set to deny access. This is reflected by test changes. Note
how various `hg pull` and `hg push` operations now fail before
discovery. (They fail during the initial "capabilities" request.)

This change fixes a security issue where built-in wire protocol
commands would return repository data even if the web config were
configured to deny access to that data.

I'm on the fence as to whether we should HTTP 401 the capabilities
request. On one hand, it can expose repository metadata and can tell
callers things like what version of Mercurial the server is running.
On the other hand, a client may need to know the capabilities in order
to authenticate in a follow-up request. It appears that Mercurial
clients handle the HTTP 401 on *any* protocol request, so we should
be OK sending a 401 for "capabilities." But if this causes problems,
it should be possible to allow "capabilities" to always work.

.. bc::

   Various read-only wire protocol commands now return HTTP 401
   Unauthorized if the hgweb configuration denies read/pull access to
   the repository.

   Previously, various wire protocol commands would still work and
   return data if read access was disabled.

test stripping of filelogs where the linkrev doesn't always increase

  $ echo '[extensions]' >> $HGRCPATH
  $ echo 'strip =' >> $HGRCPATH
  $ hg init orig
  $ cd orig
  $ commit()
  > {
  >     hg up -qC null
  >     count=1
  >     for i in "$@"; do
  >         for f in $i; do
  >             echo $count > $f
  >         done
  >         count=`expr $count + 1`
  >     done
  >     hg commit -qAm "$*"
  > }

2 1 0 2 0 1 2

  $ commit '201 210'
  $ commit '102 120' '210'
  $ commit '021'
  $ commit '201' '021 120'
  $ commit '012 021' '102 201' '120 210'
  $ commit 'manifest-file'
  $ commit '102 120' '012 210' '021 201'
  $ commit '201 210' '021 120' '012 102'
  $ HGUSER=another-user; export HGUSER
  $ commit 'manifest-file'
  $ commit '012' 'manifest-file'
  $ cd ..
  $ hg clone -q -U -r -1 -r -2 -r -3 -r -4 -r -6 orig crossed
  $ cd crossed
  $ hg debugindex --manifest
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0     112  .....       0 6f105cbb914d 000000000000 000000000000 (re)
       1       112      56  .....       3 1b55917b3699 000000000000 000000000000 (re)
       2       168     123  .....       1 8f3d04e263e5 000000000000 000000000000 (re)
       3       291     122  .....       2 f0ef8726ac4f 000000000000 000000000000 (re)
       4       413      87  .....       4 0b76e38b4070 000000000000 000000000000 (re)

  $ for i in 012 021 102 120 201 210 manifest-file; do
  >     echo $i
  >     hg debugindex $i
  >     echo
  > done
  012
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       0 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       1 5d9299349fc0 000000000000 000000000000 (re)
       2         6       3  .....       2 2661d26c6496 000000000000 000000000000 (re)
  
  021
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       0 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       2 5d9299349fc0 000000000000 000000000000 (re)
       2         6       3  .....       1 2661d26c6496 000000000000 000000000000 (re)
  
  102
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       1 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       0 5d9299349fc0 000000000000 000000000000 (re)
       2         6       3  .....       2 2661d26c6496 000000000000 000000000000 (re)
  
  120
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       1 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       2 5d9299349fc0 000000000000 000000000000 (re)
       2         6       3  .....       0 2661d26c6496 000000000000 000000000000 (re)
  
  201
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       2 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       0 5d9299349fc0 000000000000 000000000000 (re)
       2         6       3  .....       1 2661d26c6496 000000000000 000000000000 (re)
  
  210
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       2 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       1 5d9299349fc0 000000000000 000000000000 (re)
       2         6       3  .....       0 2661d26c6496 000000000000 000000000000 (re)
  
  manifest-file
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       3 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       4 5d9299349fc0 000000000000 000000000000 (re)
  
  $ cd ..
  $ for i in 0 1 2 3 4; do
  >     hg clone -q -U --pull crossed $i
  >     echo "% Trying to strip revision $i"
  >     hg --cwd $i strip $i
  >     echo "% Verifying"
  >     hg --cwd $i verify
  >     echo
  > done
  % Trying to strip revision 0
  saved backup bundle to $TESTTMP/0/.hg/strip-backup/*-backup.hg (glob)
  % Verifying
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  7 files, 4 changesets, 15 total revisions
  
  % Trying to strip revision 1
  saved backup bundle to $TESTTMP/1/.hg/strip-backup/*-backup.hg (glob)
  % Verifying
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  7 files, 4 changesets, 14 total revisions
  
  % Trying to strip revision 2
  saved backup bundle to $TESTTMP/2/.hg/strip-backup/*-backup.hg (glob)
  % Verifying
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  7 files, 4 changesets, 14 total revisions
  
  % Trying to strip revision 3
  saved backup bundle to $TESTTMP/3/.hg/strip-backup/*-backup.hg (glob)
  % Verifying
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  7 files, 4 changesets, 19 total revisions
  
  % Trying to strip revision 4
  saved backup bundle to $TESTTMP/4/.hg/strip-backup/*-backup.hg (glob)
  % Verifying
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  7 files, 4 changesets, 19 total revisions