treemanifest: create treemanifest class
There are a number of problems with large and flat manifests. Copying
from http://mercurial.selenic.com/wiki/ManifestShardingPlan:
* manifest too large for RAM
* manifest resolution too much CPU (long delta chains)
* committing is slow because entire manifest has to be hashed
* impossible for narrow clone to leave out part of manifest as all is
needed to calculate new hash
* diffing two revisions involves traversing entire subdirectories
even if identical
This is a first step in a series introducing a manifest revlog per
directory.
This change adds a new manifest class: treemanifest, which is a tree
where each node has a dict of files (nodeids), a dict of flags, and a
dict of subdirectories (treemanifests). So far, it behaves just like
manifestdict, but it will later help us write one manifest revlog per
directory. The new class is still unused; it will be used after the
next change.
The code is not yet optimized. Running with it (see below) makes most
or all operations slower. Once we start storing manifest revlogs for
every directory, it should be possible to make many of these
operations much faster. The fastdelta() optimization has been
intentionally not implemented for the treemanifests. We can implement
it later if necessary.
All tests pass when run with the following patch (and without, of
couse):
--- a/mercurial/manifest.py Thu Mar 19 11:08:42 2015 -0700
+++ b/mercurial/manifest.py Thu Mar 19 11:15:50 2015 -0700
@@ -596,7 +596,7 @@ class manifest(revlog.revlog):
return None, None
def add(self, m, transaction, link, p1, p2, added, removed):
- if p1 in self._mancache:
+ if False and p1 in self._mancache:
# If our first parent is in the manifest cache, we can
# compute a delta here using properties we know about the
# manifest up-front, which may save time later for the
@@ -626,3 +626,5 @@ class manifest(revlog.revlog):
self._mancache[n] = (m, arraytext)
return n
+
+manifestdict = treemanifest
# dagutil.py - dag utilities for mercurial
#
# Copyright 2010 Benoit Boissinot <bboissin@gmail.com>
# and Peter Arrenbrecht <peter@arrenbrecht.ch>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from node import nullrev
from i18n import _
class basedag(object):
'''generic interface for DAGs
terms:
"ix" (short for index) identifies a nodes internally,
"id" identifies one externally.
All params are ixs unless explicitly suffixed otherwise.
Pluralized params are lists or sets.
'''
def __init__(self):
self._inverse = None
def nodeset(self):
'''set of all node ixs'''
raise NotImplementedError
def heads(self):
'''list of head ixs'''
raise NotImplementedError
def parents(self, ix):
'''list of parents ixs of ix'''
raise NotImplementedError
def inverse(self):
'''inverse DAG, where parents becomes children, etc.'''
raise NotImplementedError
def ancestorset(self, starts, stops=None):
'''
set of all ancestors of starts (incl), but stop walk at stops (excl)
'''
raise NotImplementedError
def descendantset(self, starts, stops=None):
'''
set of all descendants of starts (incl), but stop walk at stops (excl)
'''
return self.inverse().ancestorset(starts, stops)
def headsetofconnecteds(self, ixs):
'''
subset of connected list of ixs so that no node has a descendant in it
By "connected list" we mean that if an ancestor and a descendant are in
the list, then so is at least one path connecting them.
'''
raise NotImplementedError
def externalize(self, ix):
'''return a node id'''
return self._externalize(ix)
def externalizeall(self, ixs):
'''return a list of (or set if given a set) of node ids'''
ids = self._externalizeall(ixs)
if isinstance(ixs, set):
return set(ids)
return list(ids)
def internalize(self, id):
'''return a node ix'''
return self._internalize(id)
def internalizeall(self, ids, filterunknown=False):
'''return a list of (or set if given a set) of node ixs'''
ixs = self._internalizeall(ids, filterunknown)
if isinstance(ids, set):
return set(ixs)
return list(ixs)
class genericdag(basedag):
'''generic implementations for DAGs'''
def ancestorset(self, starts, stops=None):
if stops:
stops = set(stops)
else:
stops = set()
seen = set()
pending = list(starts)
while pending:
n = pending.pop()
if n not in seen and n not in stops:
seen.add(n)
pending.extend(self.parents(n))
return seen
def headsetofconnecteds(self, ixs):
hds = set(ixs)
if not hds:
return hds
for n in ixs:
for p in self.parents(n):
hds.discard(p)
assert hds
return hds
class revlogbaseddag(basedag):
'''generic dag interface to a revlog'''
def __init__(self, revlog, nodeset):
basedag.__init__(self)
self._revlog = revlog
self._heads = None
self._nodeset = nodeset
def nodeset(self):
return self._nodeset
def heads(self):
if self._heads is None:
self._heads = self._getheads()
return self._heads
def _externalize(self, ix):
return self._revlog.index[ix][7]
def _externalizeall(self, ixs):
idx = self._revlog.index
return [idx[i][7] for i in ixs]
def _internalize(self, id):
ix = self._revlog.rev(id)
if ix == nullrev:
raise LookupError(id, self._revlog.indexfile, _('nullid'))
return ix
def _internalizeall(self, ids, filterunknown):
rl = self._revlog
if filterunknown:
return [r for r in map(rl.nodemap.get, ids)
if (r is not None
and r != nullrev
and r not in rl.filteredrevs)]
return map(self._internalize, ids)
class revlogdag(revlogbaseddag):
'''dag interface to a revlog'''
def __init__(self, revlog):
revlogbaseddag.__init__(self, revlog, set(revlog))
def _getheads(self):
return [r for r in self._revlog.headrevs() if r != nullrev]
def parents(self, ix):
rlog = self._revlog
idx = rlog.index
revdata = idx[ix]
prev = revdata[5]
if prev != nullrev:
prev2 = revdata[6]
if prev2 == nullrev:
return [prev]
return [prev, prev2]
prev2 = revdata[6]
if prev2 != nullrev:
return [prev2]
return []
def inverse(self):
if self._inverse is None:
self._inverse = inverserevlogdag(self)
return self._inverse
def ancestorset(self, starts, stops=None):
rlog = self._revlog
idx = rlog.index
if stops:
stops = set(stops)
else:
stops = set()
seen = set()
pending = list(starts)
while pending:
rev = pending.pop()
if rev not in seen and rev not in stops:
seen.add(rev)
revdata = idx[rev]
for i in [5, 6]:
prev = revdata[i]
if prev != nullrev:
pending.append(prev)
return seen
def headsetofconnecteds(self, ixs):
if not ixs:
return set()
rlog = self._revlog
idx = rlog.index
headrevs = set(ixs)
for rev in ixs:
revdata = idx[rev]
for i in [5, 6]:
prev = revdata[i]
if prev != nullrev:
headrevs.discard(prev)
assert headrevs
return headrevs
def linearize(self, ixs):
'''linearize and topologically sort a list of revisions
The linearization process tries to create long runs of revs where
a child rev comes immediately after its first parent. This is done by
visiting the heads of the given revs in inverse topological order,
and for each visited rev, visiting its second parent, then its first
parent, then adding the rev itself to the output list.
'''
sorted = []
visit = list(self.headsetofconnecteds(ixs))
visit.sort(reverse=True)
finished = set()
while visit:
cur = visit.pop()
if cur < 0:
cur = -cur - 1
if cur not in finished:
sorted.append(cur)
finished.add(cur)
else:
visit.append(-cur - 1)
visit += [p for p in self.parents(cur)
if p in ixs and p not in finished]
assert len(sorted) == len(ixs)
return sorted
class inverserevlogdag(revlogbaseddag, genericdag):
'''inverse of an existing revlog dag; see revlogdag.inverse()'''
def __init__(self, orig):
revlogbaseddag.__init__(self, orig._revlog, orig._nodeset)
self._orig = orig
self._children = {}
self._roots = []
self._walkfrom = len(self._revlog) - 1
def _walkto(self, walkto):
rev = self._walkfrom
cs = self._children
roots = self._roots
idx = self._revlog.index
while rev >= walkto:
data = idx[rev]
isroot = True
for prev in [data[5], data[6]]: # parent revs
if prev != nullrev:
cs.setdefault(prev, []).append(rev)
isroot = False
if isroot:
roots.append(rev)
rev -= 1
self._walkfrom = rev
def _getheads(self):
self._walkto(nullrev)
return self._roots
def parents(self, ix):
if ix is None:
return []
if ix <= self._walkfrom:
self._walkto(ix)
return self._children.get(ix, [])
def inverse(self):
return self._orig