Mercurial > hg
view tests/test-http-proxy.t @ 39494:e72130f58f5d
snapshot: consider all snapshots in the parents' chains
There are no reasons to only consider full snapshot as a possible base for an
intermediate snapshot. Now that the basic principles have been set, we can
start adding more levels of snapshots.
We now consider all snapshots in the parent's chains (full or intermediate).
This creates a chain of intermediate snapshots, each smaller than the previous
one.
# Effect On The Test Repository
In the test repository, we can see a decrease in the revlog size and slightly
shorter delta chain.
However, that approach creates snapshots more frequently, increasing the risk
of ending into problematic cases in very branchy repositories (not triggered
by the test repository). The next changesets will remove that risk by adding
logic that increases deltas reuse.
author | Boris Feld <boris.feld@octobus.net> |
---|---|
date | Fri, 07 Sep 2018 11:17:30 -0400 |
parents | f1186c292d03 |
children | 4bd6e444c76f |
line wrap: on
line source
#require serve $ hg init a $ cd a $ echo a > a $ hg ci -Ama -d '1123456789 0' adding a $ hg serve --config server.uncompressed=True -p $HGPORT -d --pid-file=hg.pid $ cat hg.pid >> $DAEMON_PIDS $ cd .. $ tinyproxy.py $HGPORT1 localhost 2>proxy.log >/dev/null </dev/null & $ while [ ! -f proxy.pid ]; do sleep 0; done $ cat proxy.pid >> $DAEMON_PIDS url for proxy, stream $ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone --stream http://localhost:$HGPORT/ b streaming all changes 3 files to transfer, 303 bytes of data (reporevlogstore !) 4 files to transfer, 330 bytes of data (reposimplestore !) transferred * bytes in * seconds (*/sec) (glob) searching for changes no changes found updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd b $ hg verify checking changesets checking manifests crosschecking files in changesets and manifests checking files checked 1 changesets with 1 changes to 1 files $ cd .. url for proxy, pull $ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone http://localhost:$HGPORT/ b-pull requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 83180e7845de updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd b-pull $ hg verify checking changesets checking manifests crosschecking files in changesets and manifests checking files checked 1 changesets with 1 changes to 1 files $ cd .. host:port for proxy $ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ c requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 83180e7845de updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved proxy url with user name and password $ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ d requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 83180e7845de updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved url with user name and password $ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://user:passwd@localhost:$HGPORT/ e requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 83180e7845de updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved bad host:port for proxy ("Protocol not supported" can happen on misconfigured hosts) $ http_proxy=localhost:$HGPORT2 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ f abort: error: (Connection refused|Protocol not supported|.* actively refused it|Cannot assign requested address) (re) [255] do not use the proxy if it is in the no list $ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.no=localhost http://localhost:$HGPORT/ g requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 83180e7845de updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cat proxy.log * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=branchmap HTTP/1.1" - - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=stream_out HTTP/1.1" - - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D83180e7845de420a1bb46896fd5fe05294f8d629 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=0&common=83180e7845de420a1bb46896fd5fe05294f8d629&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)