view tests/test-symlinks.t @ 30764:e75463e3179f

protocol: send application/mercurial-0.2 responses to capable clients

With this commit, the HTTP transport now parses the X-HgProto-<N>
header to determine what media type and compression engine to use for
responses. So far, we only compress responses that are already being
compressed with zlib today (stream response types to specific
commands). We can expand things to cover additional response types
later.

The practical side-effect of this commit is that non-zlib compression
engines will be used if both ends support them. This means if both
ends have zstd support, zstd - not zlib - will be used to compress
data!

When cloning the mozilla-unified repository between a local HTTP
server and client, the benefits of non-zlib compression are quite
noticeable:

  engine     server CPU (s)   client CPU (s)    bundle size
zlib (l=6)      174.1            283.2         1,148,547,026
zstd (l=1)       99.2            267.3         1,127,513,841
zstd (l=3)      103.1            266.9         1,018,861,363
zstd (l=7)      128.3            269.7           919,190,278
zstd (l=10)     162.0               -            894,547,179
none             95.3            277.2         4,097,566,064

The default zstd compression level is 3. So if you deploy zstd
capable Mercurial to your clients and servers and CPU time on
your server is dominated by "getbundle" requests (clients cloning
and pulling) - and my experience at Mozilla tells me this is often
the case - this commit could drastically reduce your server-side
CPU usage *and* save on bandwidth costs!

Another benefit of this change is that server operators can install
*any* compression engine. While it isn't enabled by default, the
"none" compression engine can now be used to disable wire protocol
compression completely. Previously, commands like "getbundle" always
zlib compressed output, adding considerable overhead to generating
responses. If you are on a high speed network and your server is under
high load, it might be advantageous to trade bandwidth for CPU.
Although, zstd at level 1 doesn't use that much CPU, so I'm not
convinced that disabling compression wholesale is worthwhile. And, my
data seems to indicate a slow down on the client without compression.
I suspect this is due to a lack of buffering resulting in an increase
in socket read() calls and/or the fact we're transferring an extra 3 GB
of data (parsing HTTP chunked transfer and processing extra TCP packets
can add up). This is definitely worth investigating and optimizing. But
since the "none" compressor isn't enabled by default, I'm inclined to
punt on this issue.

This commit introduces tons of tests. Some of these should arguably
have been implemented on previous commits. But it was difficult to
test without the server functionality in place.

#require symlink

== tests added in 0.7 ==

  $ hg init test-symlinks-0.7; cd test-symlinks-0.7;
  $ touch foo; ln -s foo bar; ln -s nonexistent baz

import with add and addremove -- symlink walking should _not_ screwup.

  $ hg add
  adding bar
  adding baz
  adding foo
  $ hg forget bar baz foo
  $ hg addremove
  adding bar
  adding baz
  adding foo

commit -- the symlink should _not_ appear added to dir state

  $ hg commit -m 'initial'

  $ touch bomb

again, symlink should _not_ show up on dir state

  $ hg addremove
  adding bomb

Assert screamed here before, should go by without consequence

  $ hg commit -m 'is there a bug?'
  $ cd ..


== fifo & ignore ==

  $ hg init test; cd test;

  $ mkdir dir
  $ touch a.c dir/a.o dir/b.o

test what happens if we want to trick hg

  $ hg commit -A -m 0
  adding a.c
  adding dir/a.o
  adding dir/b.o
  $ echo "relglob:*.o" > .hgignore
  $ rm a.c
  $ rm dir/a.o
  $ rm dir/b.o
  $ mkdir dir/a.o
  $ ln -s nonexistent dir/b.o
  $ mkfifo a.c

it should show a.c, dir/a.o and dir/b.o deleted

  $ hg status
  M dir/b.o
  ! a.c
  ! dir/a.o
  ? .hgignore
  $ hg status a.c
  a.c: unsupported file type (type is fifo)
  ! a.c
  $ cd ..


== symlinks from outside the tree ==

test absolute path through symlink outside repo

  $ p=`pwd`
  $ hg init x
  $ ln -s x y
  $ cd x
  $ touch f
  $ hg add f
  $ hg status "$p"/y/f
  A f

try symlink outside repo to file inside

  $ ln -s x/f ../z

this should fail

  $ hg status ../z && { echo hg mistakenly exited with status 0; exit 1; } || :
  abort: ../z not under root '$TESTTMP/x'
  $ cd ..


== cloning symlinks ==
  $ hg init clone; cd clone;

try cloning symlink in a subdir
1. commit a symlink

  $ mkdir -p a/b/c
  $ cd a/b/c
  $ ln -s /path/to/symlink/source demo
  $ cd ../../..
  $ hg stat
  ? a/b/c/demo
  $ hg commit -A -m 'add symlink in a/b/c subdir'
  adding a/b/c/demo

2. clone it

  $ cd ..
  $ hg clone clone clonedest
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved


== symlink and git diffs ==

git symlink diff

  $ cd clonedest
  $ hg diff --git -r null:tip
  diff --git a/a/b/c/demo b/a/b/c/demo
  new file mode 120000
  --- /dev/null
  +++ b/a/b/c/demo
  @@ -0,0 +1,1 @@
  +/path/to/symlink/source
  \ No newline at end of file
  $ hg export --git tip > ../sl.diff

import git symlink diff

  $ hg rm a/b/c/demo
  $ hg commit -m'remove link'
  $ hg import ../sl.diff
  applying ../sl.diff
  $ hg diff --git -r 1:tip
  diff --git a/a/b/c/demo b/a/b/c/demo
  new file mode 120000
  --- /dev/null
  +++ b/a/b/c/demo
  @@ -0,0 +1,1 @@
  +/path/to/symlink/source
  \ No newline at end of file

== symlinks and addremove ==

directory moved and symlinked

  $ mkdir foo
  $ touch foo/a
  $ hg ci -Ama
  adding foo/a
  $ mv foo bar
  $ ln -s bar foo
  $ hg status
  ! foo/a
  ? bar/a
  ? foo

now addremove should remove old files

  $ hg addremove
  adding bar/a
  adding foo
  removing foo/a

commit and update back

  $ hg ci -mb
  $ hg up '.^'
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg up tip
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved

  $ cd ..

== root of repository is symlinked ==

  $ hg init root
  $ ln -s root link
  $ cd root
  $ echo foo > foo
  $ hg status
  ? foo
  $ hg status ../link
  ? foo
  $ hg add foo
  $ hg cp foo "$TESTTMP/link/bar"
  foo has not been committed yet, so no copy data will be stored for bar.
  $ cd ..


  $ hg init b
  $ cd b
  $ ln -s nothing dangling
  $ hg commit -m 'commit symlink without adding' dangling
  abort: dangling: file not tracked!
  [255]
  $ hg add dangling
  $ hg commit -m 'add symlink'

  $ hg tip -v
  changeset:   0:cabd88b706fc
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       dangling
  description:
  add symlink
  
  
  $ hg manifest --debug
  2564acbe54bbbedfbf608479340b359f04597f80 644 @ dangling
  $ readlink.py dangling
  dangling -> nothing

  $ rm dangling
  $ ln -s void dangling
  $ hg commit -m 'change symlink'
  $ readlink.py dangling
  dangling -> void


modifying link

  $ rm dangling
  $ ln -s empty dangling
  $ readlink.py dangling
  dangling -> empty


reverting to rev 0:

  $ hg revert -r 0 -a
  reverting dangling
  $ readlink.py dangling
  dangling -> nothing


backups:

  $ readlink.py *.orig
  dangling.orig -> empty
  $ rm *.orig
  $ hg up -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

copies

  $ hg cp -v dangling dangling2
  copying dangling to dangling2
  $ hg st -Cmard
  A dangling2
    dangling
  $ readlink.py dangling dangling2
  dangling -> void
  dangling2 -> void


Issue995: hg copy -A incorrectly handles symbolic links

  $ hg up -C
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ mkdir dir
  $ ln -s dir dirlink
  $ hg ci -qAm 'add dirlink'
  $ mkdir newdir
  $ mv dir newdir/dir
  $ mv dirlink newdir/dirlink
  $ hg mv -A dirlink newdir/dirlink

  $ cd ..