Mercurial > hg
view tests/test-convert-svn-sink.t @ 46607:e9901d01d135
revlog: add a mechanism to verify expected file position before appending
If someone uses `hg debuglocks`, or some non-hg process writes to the .hg
directory without respecting the locks, or if the repo's on a networked
filesystem, it's possible for the revlog code to write out corrupted data.
The form of this corruption can vary depending on what data was written and how
that happened. We are in the "networked filesystem" case (though I've had users
also do this to themselves with the "`hg debuglocks`" scenario), and most often
see this with the changelog. What ends up happening is we produce two items
(let's call them rev1 and rev2) in the .i file that have the same linkrev,
baserev, and offset into the .d file, while the data in the .d file is appended
properly. rev2's compressed_size is accurate for rev2, but when we go to
decompress the data in the .d file, we use the offset that's recorded in the
index file, which is the same as rev1, and attempt to decompress
rev2.compressed_size bytes of rev1's data. This usually does not succeed. :)
When using inline data, this also fails, though I haven't investigated why too
closely. This shows up as a "patch decode" error. I believe what's happening
there is that we're basically ignoring the offset field, getting the data
properly, but since baserev != rev, it thinks this is a delta based on rev
(instead of a full text) and can't actually apply it as such.
For now, I'm going to make this an optional component and default it to entirely
off. I may increase the default severity of this in the future, once I've
enabled it for my users and we gain more experience with it. Luckily, most of my
users have a versioned filesystem and can roll back to before the corruption has
been written, it's just a hassle to do so and not everyone knows how (so it's a
support burden). Users on other filesystems will not have that luxury, and this
can cause them to have a corrupted repository that they are unlikely to know how
to resolve, and they'll see this as a data-loss event. Refusing to create the
corruption is a much better user experience.
This mechanism is not perfect. There may be false-negatives (racy writes that
are not detected). There should not be any false-positives (non-racy writes that
are detected as such). This is not a mechanism that makes putting a repo on a
networked filesystem "safe" or "supported", just *less* likely to cause
corruption.
Differential Revision: https://phab.mercurial-scm.org/D9952
author | Kyle Lippincott <spectral@google.com> |
---|---|
date | Wed, 03 Feb 2021 16:33:10 -0800 |
parents | 7525e77b5eac |
children |
line wrap: on
line source
#require svn13 $ svnupanddisplay() > { > ( > cd $1; > svn up -q; > svn st -v | sed 's/ */ /g' | sort > limit='' > if [ $2 -gt 0 ]; then > limit="--limit=$2" > fi > svn log --xml -v $limit | "$PYTHON" "$TESTDIR/svnxml.py" > ) > } $ cat >> $HGRCPATH <<EOF > [extensions] > convert = > EOF $ hg init a Add $ echo a > a/a $ mkdir -p a/d1/d2 $ echo b > a/d1/d2/b $ hg --cwd a ci -d '0 0' -A -m 'add a file' adding a adding d1/d2/b Modify $ svn-safe-append.py a a/a $ hg --cwd a ci -d '1 0' -m 'modify a file' $ hg --cwd a tip -q 1:e0e2b8a9156b $ hg convert -d svn a assuming destination a-hg initializing svn repository 'a-hg' initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 1 add a file 0 modify a file $ svnupanddisplay a-hg-wc 2 2 1 test d1 2 1 test d1/d2 2 1 test d1/d2/b 2 2 test . 2 2 test a revision: 2 author: test date: * (glob) msg: modify a file M /a revision: 1 author: test date: * (glob) msg: add a file A /a A /d1 A /d1/d2 A /d1/d2/b $ ls a a-hg-wc a: a d1 a-hg-wc: a d1 $ cmp a/a a-hg-wc/a Rename $ hg --cwd a mv a b $ hg --cwd a ci -d '2 0' -m 'rename a file' $ hg --cwd a tip -q 2:eb5169441d43 $ hg convert -d svn a assuming destination a-hg initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 rename a file $ svnupanddisplay a-hg-wc 1 3 1 test d1 3 1 test d1/d2 3 1 test d1/d2/b 3 3 test . 3 3 test b revision: 3 author: test date: * (glob) msg: rename a file D /a A /b (from /a@2) $ ls a a-hg-wc a: b d1 a-hg-wc: b d1 Copy $ hg --cwd a cp b c $ hg --cwd a ci -d '3 0' -m 'copy a file' $ hg --cwd a tip -q 3:60effef6ab48 $ hg convert -d svn a assuming destination a-hg initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 copy a file $ svnupanddisplay a-hg-wc 1 4 1 test d1 4 1 test d1/d2 4 1 test d1/d2/b 4 3 test b 4 4 test . 4 4 test c revision: 4 author: test date: * (glob) msg: copy a file A /c (from /b@3) $ ls a a-hg-wc a: b c d1 a-hg-wc: b c d1 $ hg --cwd a rm b Remove $ hg --cwd a ci -d '4 0' -m 'remove a file' $ hg --cwd a tip -q 4:87bbe3013fb6 $ hg convert -d svn a assuming destination a-hg initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 remove a file $ svnupanddisplay a-hg-wc 1 5 1 test d1 5 1 test d1/d2 5 1 test d1/d2/b 5 4 test c 5 5 test . revision: 5 author: test date: * (glob) msg: remove a file D /b $ ls a a-hg-wc a: c d1 a-hg-wc: c d1 Executable #if execbit $ chmod +x a/c #else $ echo fake >> a/c #endif $ hg --cwd a ci -d '5 0' -m 'make a file executable' #if execbit $ hg --cwd a tip -q 5:ff42e473c340 #else $ hg --cwd a tip -q 5:817a700c8cf1 #endif $ hg convert -d svn a assuming destination a-hg initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 make a file executable $ svnupanddisplay a-hg-wc 1 6 1 test d1 6 1 test d1/d2 6 1 test d1/d2/b 6 6 test . 6 6 test c revision: 6 author: test date: * (glob) msg: make a file executable M /c #if execbit $ test -x a-hg-wc/c #endif #if symlink Symlinks $ ln -s a/missing a/link $ hg --cwd a commit -Am 'add symlink' adding link $ hg --cwd a mv link newlink $ hg --cwd a commit -m 'move symlink' $ hg convert -d svn a a-svnlink initializing svn repository 'a-svnlink' initializing svn working copy 'a-svnlink-wc' scanning source... sorting... converting... 7 add a file 6 modify a file 5 rename a file 4 copy a file 3 remove a file 2 make a file executable 1 add symlink 0 move symlink $ svnupanddisplay a-svnlink-wc 1 8 1 test d1 8 1 test d1/d2 8 1 test d1/d2/b 8 6 test c 8 8 test . 8 8 test newlink revision: 8 author: test date: * (glob) msg: move symlink D /link A /newlink (from /link@7) Make sure our changes don't affect the rest of the test cases $ hg --cwd a up 5 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ hg --cwd a --config extensions.strip= strip -r 6 saved backup bundle to $TESTTMP/a/.hg/strip-backup/bd4f7b7a7067-ed505e42-backup.hg #endif Convert with --full adds and removes files that didn't change $ touch a/f $ hg -R a ci -Aqmf $ echo "rename c d" > filemap $ hg convert -d svn a --filemap filemap --full assuming destination a-hg initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 f $ svnupanddisplay a-hg-wc 1 7 7 test . 7 7 test d 7 7 test f revision: 7 author: test date: * (glob) msg: f D /c A /d D /d1 A /f $ rm -rf a a-hg a-hg-wc Executable in new directory $ hg init a $ mkdir a/d1 $ echo a > a/d1/a #if execbit $ chmod +x a/d1/a #else $ echo fake >> a/d1/a #endif $ hg --cwd a ci -d '0 0' -A -m 'add executable file in new directory' adding d1/a $ hg convert -d svn a assuming destination a-hg initializing svn repository 'a-hg' initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 add executable file in new directory $ svnupanddisplay a-hg-wc 1 1 1 test . 1 1 test d1 1 1 test d1/a revision: 1 author: test date: * (glob) msg: add executable file in new directory A /d1 A /d1/a #if execbit $ test -x a-hg-wc/d1/a #endif Copy to new directory $ mkdir a/d2 $ hg --cwd a cp d1/a d2/a $ hg --cwd a ci -d '1 0' -A -m 'copy file to new directory' $ hg convert -d svn a assuming destination a-hg initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 copy file to new directory $ svnupanddisplay a-hg-wc 1 2 1 test d1 2 1 test d1/a 2 2 test . 2 2 test d2 2 2 test d2/a revision: 2 author: test date: * (glob) msg: copy file to new directory A /d2 A /d2/a (from /d1/a@1) Branchy history $ hg init b $ echo base > b/b $ hg --cwd b ci -d '0 0' -Ambase adding b $ svn-safe-append.py left-1 b/b $ echo left-1 > b/left-1 $ hg --cwd b ci -d '1 0' -Amleft-1 adding left-1 $ svn-safe-append.py left-2 b/b $ echo left-2 > b/left-2 $ hg --cwd b ci -d '2 0' -Amleft-2 adding left-2 $ hg --cwd b up 0 1 files updated, 0 files merged, 2 files removed, 0 files unresolved $ svn-safe-append.py right-1 b/b $ echo right-1 > b/right-1 $ hg --cwd b ci -d '3 0' -Amright-1 adding right-1 created new head $ svn-safe-append.py right-2 b/b $ echo right-2 > b/right-2 $ hg --cwd b ci -d '4 0' -Amright-2 adding right-2 $ hg --cwd b up -C 2 3 files updated, 0 files merged, 2 files removed, 0 files unresolved $ hg --cwd b merge merging b warning: conflicts while merging b! (edit, then use 'hg resolve --mark') 2 files updated, 0 files merged, 0 files removed, 1 files unresolved use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon [1] $ hg --cwd b revert -r 2 b $ hg --cwd b resolve -m b (no more unresolved files) $ hg --cwd b ci -d '5 0' -m 'merge' Expect 4 changes $ hg convert -d svn b assuming destination b-hg initializing svn repository 'b-hg' initializing svn working copy 'b-hg-wc' scanning source... sorting... converting... 5 base 4 left-1 3 left-2 2 right-1 1 right-2 0 merge $ svnupanddisplay b-hg-wc 0 4 2 test left-1 4 3 test b 4 3 test left-2 4 4 test . 4 4 test right-1 4 4 test right-2 revision: 4 author: test date: * (glob) msg: merge A /right-1 A /right-2 revision: 3 author: test date: * (glob) msg: left-2 M /b A /left-2 revision: 2 author: test date: * (glob) msg: left-1 M /b A /left-1 revision: 1 author: test date: * (glob) msg: base A /b Tags are not supported, but must not break conversion $ rm -rf a a-hg a-hg-wc $ hg init a $ echo a > a/a $ hg --cwd a ci -d '0 0' -A -m 'Add file a' adding a $ hg --cwd a tag -d '1 0' -m 'Tagged as v1.0' v1.0 $ hg convert -d svn a assuming destination a-hg initializing svn repository 'a-hg' initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 1 Add file a 0 Tagged as v1.0 writing Subversion tags is not yet implemented $ svnupanddisplay a-hg-wc 2 2 1 test a 2 2 test . 2 2 test .hgtags revision: 2 author: test date: * (glob) msg: Tagged as v1.0 A /.hgtags revision: 1 author: test date: * (glob) msg: Add file a A /a $ rm -rf a a-hg a-hg-wc #if execbit Executable bit removal $ hg init a $ echo a > a/exec $ chmod +x a/exec $ hg --cwd a ci -d '1 0' -A -m 'create executable' adding exec $ chmod -x a/exec $ hg --cwd a ci -d '2 0' -A -m 'remove executable bit' $ hg convert -d svn a assuming destination a-hg initializing svn repository 'a-hg' initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 1 create executable 0 remove executable bit $ svnupanddisplay a-hg-wc 0 2 2 test . 2 2 test exec revision: 2 author: test date: * (glob) msg: remove executable bit M /exec revision: 1 author: test date: * (glob) msg: create executable A /exec $ test ! -x a-hg-wc/exec $ rm -rf a a-hg a-hg-wc #endif Skipping empty commits $ hg init a $ hg --cwd a --config ui.allowemptycommit=True ci -d '1 0' -m 'Initial empty commit' $ echo a > a/a $ hg --cwd a ci -d '0 0' -A -m 'Some change' adding a $ hg --cwd a --config ui.allowemptycommit=True ci -d '2 0' -m 'Empty commit 1' $ hg --cwd a --config ui.allowemptycommit=True ci -d '3 0' -m 'Empty commit 2' $ echo b > a/b $ hg --cwd a ci -d '0 0' -A -m 'Another change' adding b $ hg convert -d svn a assuming destination a-hg initializing svn repository 'a-hg' initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 4 Initial empty commit 3 Some change 2 Empty commit 1 1 Empty commit 2 0 Another change $ svnupanddisplay a-hg-wc 0 2 1 test a 2 2 test . 2 2 test b revision: 2 author: test date: * (glob) msg: Another change A /b revision: 1 author: test date: * (glob) msg: Some change A /a $ rm -rf a a-hg a-hg-wc Commit dates convertion $ hg init a $ echo a >> a/a $ hg add a adding a/a $ hg --cwd a ci -d '1 0' -A -m 'Change 1' $ echo a >> a/a $ hg --cwd a ci -d '2 0' -m 'Change 2' $ echo a >> a/a $ hg --cwd a ci -d '2 0' -m 'Change at the same time' $ echo a >> a/a $ hg --cwd a ci -d '1 0' -m 'Change in the past' $ echo a >> a/a $ hg --cwd a ci -d '3 0' -m 'Change in the future' $ hg convert --config convert.svn.dangerous-set-commit-dates=true -d svn a assuming destination a-hg initializing svn repository 'a-hg' initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 4 Change 1 3 Change 2 2 Change at the same time 1 Change in the past 0 Change in the future $ svnupanddisplay a-hg-wc 0 5 5 test . 5 5 test a revision: 5 author: test date: 1970-01-01T00:00:03.000000Z msg: Change in the future M /a revision: 4 author: test date: 1970-01-01T00:00:01.000000Z msg: Change in the past M /a revision: 3 author: test date: 1970-01-01T00:00:02.000000Z msg: Change at the same time M /a revision: 2 author: test date: 1970-01-01T00:00:02.000000Z msg: Change 2 M /a revision: 1 author: test date: 1970-01-01T00:00:01.000000Z msg: Change 1 A /a $ rm -rf a a-hg a-hg-wc