view tests/test-histedit-commute.t @ 46607:e9901d01d135

revlog: add a mechanism to verify expected file position before appending

If someone uses `hg debuglocks`, or some non-hg process writes to the .hg
directory without respecting the locks, or if the repo's on a networked
filesystem, it's possible for the revlog code to write out corrupted data.

The form of this corruption can vary depending on what data was written and how
that happened. We are in the "networked filesystem" case (though I've had users
also do this to themselves with the "`hg debuglocks`" scenario), and most often
see this with the changelog. What ends up happening is we produce two items
(let's call them rev1 and rev2) in the .i file that have the same linkrev,
baserev, and offset into the .d file, while the data in the .d file is appended
properly. rev2's compressed_size is accurate for rev2, but when we go to
decompress the data in the .d file, we use the offset that's recorded in the
index file, which is the same as rev1, and attempt to decompress
rev2.compressed_size bytes of rev1's data. This usually does not succeed. :)

When using inline data, this also fails, though I haven't investigated why too
closely. This shows up as a "patch decode" error. I believe what's happening
there is that we're basically ignoring the offset field, getting the data
properly, but since baserev != rev, it thinks this is a delta based on rev
(instead of a full text) and can't actually apply it as such.

For now, I'm going to make this an optional component and default it to entirely
off. I may increase the default severity of this in the future, once I've
enabled it for my users and we gain more experience with it. Luckily, most of my
users have a versioned filesystem and can roll back to before the corruption has
been written, it's just a hassle to do so and not everyone knows how (so it's a
support burden). Users on other filesystems will not have that luxury, and this
can cause them to have a corrupted repository that they are unlikely to know how
to resolve, and they'll see this as a data-loss event. Refusing to create the
corruption is a much better user experience.

This mechanism is not perfect. There may be false-negatives (racy writes that
are not detected). There should not be any false-positives (non-racy writes that
are detected as such). This is not a mechanism that makes putting a repo on a
networked filesystem "safe" or "supported", just *less* likely to cause
corruption.

Differential Revision: https://phab.mercurial-scm.org/D9952

  $ . "$TESTDIR/histedit-helpers.sh"

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > histedit=
  > EOF

  $ initrepo ()
  > {
  >     hg init r
  >     cd r
  >     for x in a b c d e f ; do
  >         echo $x > $x
  >         hg add $x
  >         hg ci -m $x
  >     done
  > }

  $ initrepo

log before edit
  $ hg log --graph
  @  changeset:   5:652413bf663e
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     f
  |
  o  changeset:   4:e860deea161a
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     e
  |
  o  changeset:   3:055a42cdd887
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     d
  |
  o  changeset:   2:177f92b77385
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     c
  |
  o  changeset:   1:d2ae7f538514
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     b
  |
  o  changeset:   0:cb9a9f314b8b
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     a
  


show the edit commands offered
  $ HGEDITOR=cat hg histedit 177f92b77385
  pick 177f92b77385 2 c
  pick 055a42cdd887 3 d
  pick e860deea161a 4 e
  pick 652413bf663e 5 f
  
  # Edit history between 177f92b77385 and 652413bf663e
  #
  # Commits are listed from least to most recent
  #
  # You can reorder changesets by reordering the lines
  #
  # Commands:
  #
  #  e, edit = use commit, but allow edits before making new commit
  #  m, mess = edit commit message without changing commit content
  #  p, pick = use commit
  #  b, base = checkout changeset and apply further changesets from there
  #  d, drop = remove commit from history
  #  f, fold = use commit, but combine it with the one above
  #  r, roll = like fold, but discard this commit's description and date
  #


test customization of revision summary
  $ HGEDITOR=cat hg histedit 177f92b77385 \
  >  --config histedit.summary-template='I am rev {rev} desc {desc} tags {tags}'
  pick 177f92b77385 I am rev 2 desc c tags 
  pick 055a42cdd887 I am rev 3 desc d tags 
  pick e860deea161a I am rev 4 desc e tags 
  pick 652413bf663e I am rev 5 desc f tags tip
  
  # Edit history between 177f92b77385 and 652413bf663e
  #
  # Commits are listed from least to most recent
  #
  # You can reorder changesets by reordering the lines
  #
  # Commands:
  #
  #  e, edit = use commit, but allow edits before making new commit
  #  m, mess = edit commit message without changing commit content
  #  p, pick = use commit
  #  b, base = checkout changeset and apply further changesets from there
  #  d, drop = remove commit from history
  #  f, fold = use commit, but combine it with the one above
  #  r, roll = like fold, but discard this commit's description and date
  #


colors in the custom template don't show up in the editor
  $ HGEDITOR=cat hg histedit 177f92b77385 --color=debug \
  >  --config histedit.summary-template='I am rev {label("rev", rev)}'
  pick 177f92b77385 I am rev 2
  pick 055a42cdd887 I am rev 3
  pick e860deea161a I am rev 4
  pick 652413bf663e I am rev 5
  
  # Edit history between 177f92b77385 and 652413bf663e
  #
  # Commits are listed from least to most recent
  #
  # You can reorder changesets by reordering the lines
  #
  # Commands:
  #
  #  e, edit = use commit, but allow edits before making new commit
  #  m, mess = edit commit message without changing commit content
  #  p, pick = use commit
  #  b, base = checkout changeset and apply further changesets from there
  #  d, drop = remove commit from history
  #  f, fold = use commit, but combine it with the one above
  #  r, roll = like fold, but discard this commit's description and date
  #


edit the history
(use a hacky editor to check histedit-last-edit.txt backup)

  $ EDITED="$TESTTMP/editedhistory"
  $ cat > $EDITED <<EOF
  > edit 177f92b77385 c
  > pick e860deea161a e
  > pick 652413bf663e f
  > pick 055a42cdd887 d
  > EOF
  $ HGEDITOR="cat \"$EDITED\" > " hg histedit 177f92b77385 2>&1 | fixbundle
  0 files updated, 0 files merged, 4 files removed, 0 files unresolved
  Editing (177f92b77385), commit as needed now to split the change
  (to edit 177f92b77385, `hg histedit --continue` after making changes)

rules should end up in .hg/histedit-last-edit.txt:
  $ cat .hg/histedit-last-edit.txt
  edit 177f92b77385 c
  pick e860deea161a e
  pick 652413bf663e f
  pick 055a42cdd887 d

  $ hg histedit --abort
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat > $EDITED <<EOF
  > pick 177f92b77385 c
  > pick e860deea161a e
  > pick 652413bf663e f
  > pick 055a42cdd887 d
  > EOF
  $ HGEDITOR="cat \"$EDITED\" > " hg histedit 177f92b77385 2>&1 | fixbundle

log after edit
  $ hg log --graph
  @  changeset:   5:07114f51870f
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     d
  |
  o  changeset:   4:8ade9693061e
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     f
  |
  o  changeset:   3:d8249471110a
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     e
  |
  o  changeset:   2:177f92b77385
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     c
  |
  o  changeset:   1:d2ae7f538514
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     b
  |
  o  changeset:   0:cb9a9f314b8b
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     a
  


put things back

  $ hg histedit 177f92b77385 --commands - 2>&1 << EOF | fixbundle
  > pick 177f92b77385 c
  > pick 07114f51870f d
  > pick d8249471110a e
  > pick 8ade9693061e f
  > EOF

  $ hg log --graph
  @  changeset:   5:7eca9b5b1148
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     f
  |
  o  changeset:   4:915da888f2de
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     e
  |
  o  changeset:   3:10517e47bbbb
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     d
  |
  o  changeset:   2:177f92b77385
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     c
  |
  o  changeset:   1:d2ae7f538514
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     b
  |
  o  changeset:   0:cb9a9f314b8b
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     a
  


slightly different this time

  $ hg histedit 177f92b77385 --commands - << EOF 2>&1 | fixbundle
  > pick 10517e47bbbb d
  > pick 7eca9b5b1148 f
  > pick 915da888f2de e
  > pick 177f92b77385 c
  > EOF
  $ hg log --graph
  @  changeset:   5:38b92f448761
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     c
  |
  o  changeset:   4:de71b079d9ce
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     e
  |
  o  changeset:   3:be9ae3a309c6
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     f
  |
  o  changeset:   2:799205341b6b
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     d
  |
  o  changeset:   1:d2ae7f538514
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     b
  |
  o  changeset:   0:cb9a9f314b8b
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     a
  


keep prevents stripping dead revs
  $ hg histedit 799205341b6b --keep --commands - 2>&1 << EOF | fixbundle
  > pick 799205341b6b d
  > pick be9ae3a309c6 f
  > pick 38b92f448761 c
  > pick de71b079d9ce e
  > EOF
  $ hg log --graph
  @  changeset:   7:803ef1c6fcfd
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     e
  |
  o  changeset:   6:ece0b8d93dda
  |  parent:      3:be9ae3a309c6
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     c
  |
  | o  changeset:   5:38b92f448761
  | |  user:        test
  | |  date:        Thu Jan 01 00:00:00 1970 +0000
  | |  summary:     c
  | |
  | o  changeset:   4:de71b079d9ce
  |/   user:        test
  |    date:        Thu Jan 01 00:00:00 1970 +0000
  |    summary:     e
  |
  o  changeset:   3:be9ae3a309c6
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     f
  |
  o  changeset:   2:799205341b6b
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     d
  |
  o  changeset:   1:d2ae7f538514
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     b
  |
  o  changeset:   0:cb9a9f314b8b
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     a
  


try with --rev
  $ hg histedit --commands - --rev -2 2>&1 <<EOF | fixbundle
  > pick de71b079d9ce e
  > pick 38b92f448761 c
  > EOF
  hg: parse error: pick "de71b079d9ce" changeset was not a candidate
  (only use listed changesets)
  $ hg log --graph
  @  changeset:   7:803ef1c6fcfd
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     e
  |
  o  changeset:   6:ece0b8d93dda
  |  parent:      3:be9ae3a309c6
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     c
  |
  | o  changeset:   5:38b92f448761
  | |  user:        test
  | |  date:        Thu Jan 01 00:00:00 1970 +0000
  | |  summary:     c
  | |
  | o  changeset:   4:de71b079d9ce
  |/   user:        test
  |    date:        Thu Jan 01 00:00:00 1970 +0000
  |    summary:     e
  |
  o  changeset:   3:be9ae3a309c6
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     f
  |
  o  changeset:   2:799205341b6b
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     d
  |
  o  changeset:   1:d2ae7f538514
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     b
  |
  o  changeset:   0:cb9a9f314b8b
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     a
  

Verify that revsetalias entries work with histedit:
  $ cat >> $HGRCPATH <<EOF
  > [revsetalias]
  > grandparent(ARG) = p1(p1(ARG))
  > EOF
  $ echo extra commit >> c
  $ hg ci -m 'extra commit to c'
  $ HGEDITOR=cat hg histedit 'grandparent(.)'
  pick ece0b8d93dda 6 c
  pick 803ef1c6fcfd 7 e
  pick 9c863c565126 8 extra commit to c
  
  # Edit history between ece0b8d93dda and 9c863c565126
  #
  # Commits are listed from least to most recent
  #
  # You can reorder changesets by reordering the lines
  #
  # Commands:
  #
  #  e, edit = use commit, but allow edits before making new commit
  #  m, mess = edit commit message without changing commit content
  #  p, pick = use commit
  #  b, base = checkout changeset and apply further changesets from there
  #  d, drop = remove commit from history
  #  f, fold = use commit, but combine it with the one above
  #  r, roll = like fold, but discard this commit's description and date
  #


should also work if a commit message is missing
  $ BUNDLE="$TESTDIR/missing-comment.hg"
  $ hg init missing
  $ cd missing
  $ hg unbundle $BUNDLE
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  new changesets 141947992243:bd22688093b3 (3 drafts)
  (run 'hg update' to get a working copy)
  $ hg co tip
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg log --graph
  @  changeset:   2:bd22688093b3
  |  tag:         tip
  |  user:        Robert Altman <[e-mail]>
  |  date:        Mon Nov 28 16:40:04 2011 +0000
  |  summary:     Update file.
  |
  o  changeset:   1:3b3e956f9171
  |  user:        Robert Altman <[e-mail]>
  |  date:        Mon Nov 28 16:37:57 2011 +0000
  |
  o  changeset:   0:141947992243
     user:        Robert Altman <[e-mail]>
     date:        Mon Nov 28 16:35:28 2011 +0000
     summary:     Checked in text file
  

  $ hg histedit 0
  $ cd ..

  $ cd ..


Test to make sure folding renames doesn't cause bogus conflicts (issue4251):
  $ hg init issue4251
  $ cd issue4251

  $ mkdir initial-dir
  $ echo foo > initial-dir/initial-file
  $ hg add initial-dir/initial-file
  $ hg commit -m "initial commit"

Move the file to a new directory, and in the same commit, change its content:
  $ mkdir another-dir
  $ hg mv initial-dir/initial-file another-dir/
  $ echo changed > another-dir/initial-file
  $ hg commit -m "moved and changed"

Rename the file:
  $ hg mv another-dir/initial-file another-dir/renamed-file
  $ hg commit -m "renamed"

Now, let's try to fold the second commit into the first:
  $ cat > editor.sh <<EOF
  > #!/bin/sh
  > cat > \$1 <<ENDOF
  > pick b0f4233702ca 0 initial commit
  > fold 5e8704a8f2d2 1 moved and changed
  > pick 40e7299e8fa7 2 renamed
  > ENDOF
  > EOF

  $ HGEDITOR="sh ./editor.sh" hg histedit 0
  saved backup bundle to $TESTTMP/issue4251/.hg/strip-backup/b0f4233702ca-4cf5af69-histedit.hg

  $ hg --config diff.git=yes export 0
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID fffadc26f8f85623ce60b028a3f1ccc3730f8530
  # Parent  0000000000000000000000000000000000000000
  pick b0f4233702ca 0 initial commit
  fold 5e8704a8f2d2 1 moved and changed
  pick 40e7299e8fa7 2 renamed
  
  diff --git a/another-dir/initial-file b/another-dir/initial-file
  new file mode 100644
  --- /dev/null
  +++ b/another-dir/initial-file
  @@ -0,0 +1,1 @@
  +changed


  $ hg --config diff.git=yes export 1
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID 9b730d82b00af8a2766facebfa47cc124405a118
  # Parent  fffadc26f8f85623ce60b028a3f1ccc3730f8530
  renamed
  
  diff --git a/another-dir/initial-file b/another-dir/renamed-file
  rename from another-dir/initial-file
  rename to another-dir/renamed-file


  $ cd ..

Test that branches are preserved and stays active
-------------------------------------------------

  $ hg init repo-with-branch
  $ cd repo-with-branch
  $ echo a > a
  $ hg add a
  $ hg commit -m A
  $ hg branch foo
  marked working directory as branch foo
  (branches are permanent and global, did you want a bookmark?)
  $ echo a > b
  $ hg add b
  $ hg commit -m foo-B
  $ echo a > c
  $ hg add c
  $ hg commit -m foo-C

  $ hg branch
  foo
  $ echo "pick efefa76d6dc3 2 foo-C" >> cmd
  $ echo "pick 7336e7550422 1 foo-B" >> cmd

  $ HGEDITOR=cat hg histedit -r ".^" --commands cmd --quiet
  $ hg log --template '{rev} {branch}\n'
  2 foo
  1 foo
  0 default
  $ hg branch
  foo

  $ cd ..