view tests/test-http-permissions.t @ 46607:e9901d01d135

revlog: add a mechanism to verify expected file position before appending

If someone uses `hg debuglocks`, or some non-hg process writes to the .hg
directory without respecting the locks, or if the repo's on a networked
filesystem, it's possible for the revlog code to write out corrupted data.

The form of this corruption can vary depending on what data was written and how
that happened. We are in the "networked filesystem" case (though I've had users
also do this to themselves with the "`hg debuglocks`" scenario), and most often
see this with the changelog. What ends up happening is we produce two items
(let's call them rev1 and rev2) in the .i file that have the same linkrev,
baserev, and offset into the .d file, while the data in the .d file is appended
properly. rev2's compressed_size is accurate for rev2, but when we go to
decompress the data in the .d file, we use the offset that's recorded in the
index file, which is the same as rev1, and attempt to decompress
rev2.compressed_size bytes of rev1's data. This usually does not succeed. :)

When using inline data, this also fails, though I haven't investigated why too
closely. This shows up as a "patch decode" error. I believe what's happening
there is that we're basically ignoring the offset field, getting the data
properly, but since baserev != rev, it thinks this is a delta based on rev
(instead of a full text) and can't actually apply it as such.

For now, I'm going to make this an optional component and default it to entirely
off. I may increase the default severity of this in the future, once I've
enabled it for my users and we gain more experience with it. Luckily, most of my
users have a versioned filesystem and can roll back to before the corruption has
been written, it's just a hassle to do so and not everyone knows how (so it's a
support burden). Users on other filesystems will not have that luxury, and this
can cause them to have a corrupted repository that they are unlikely to know how
to resolve, and they'll see this as a data-loss event. Refusing to create the
corruption is a much better user experience.

This mechanism is not perfect. There may be false-negatives (racy writes that
are not detected). There should not be any false-positives (non-racy writes that
are detected as such). This is not a mechanism that makes putting a repo on a
networked filesystem "safe" or "supported", just *less* likely to cause
corruption.

Differential Revision: https://phab.mercurial-scm.org/D9952

  $ cat > fakeremoteuser.py << EOF
  > import os
  > from mercurial.hgweb import hgweb_mod
  > from mercurial import wireprotov1server
  > class testenvhgweb(hgweb_mod.hgweb):
  >     def __call__(self, env, respond):
  >         # Allow REMOTE_USER to define authenticated user.
  >         if r'REMOTE_USER' in os.environ:
  >             env[r'REMOTE_USER'] = os.environ[r'REMOTE_USER']
  >         # Allow REQUEST_METHOD to override HTTP method
  >         if r'REQUEST_METHOD' in os.environ:
  >             env[r'REQUEST_METHOD'] = os.environ[r'REQUEST_METHOD']
  >         return super(testenvhgweb, self).__call__(env, respond)
  > hgweb_mod.hgweb = testenvhgweb
  > 
  > @wireprotov1server.wireprotocommand(b'customreadnoperm')
  > def customread(repo, proto):
  >     return b'read-only command no defined permissions\n'
  > @wireprotov1server.wireprotocommand(b'customwritenoperm')
  > def customwritenoperm(repo, proto):
  >     return b'write command no defined permissions\n'
  > @wireprotov1server.wireprotocommand(b'customreadwithperm', permission=b'pull')
  > def customreadwithperm(repo, proto):
  >     return b'read-only command w/ defined permissions\n'
  > @wireprotov1server.wireprotocommand(b'customwritewithperm', permission=b'push')
  > def customwritewithperm(repo, proto):
  >     return b'write command w/ defined permissions\n'
  > EOF

  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > fakeremoteuser = $TESTTMP/fakeremoteuser.py
  > strip =
  > EOF

  $ hg init test
  $ cd test
  $ echo a > a
  $ hg ci -Ama
  adding a
  $ cd ..
  $ hg clone test test2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd test2
  $ echo a >> a
  $ hg ci -mb
  $ hg book bm -r 0
  $ cd ../test

web.deny_read=* prevents access to wire protocol for all users

  $ cat > .hg/hgrc <<EOF
  > [web]
  > deny_read = *
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=stream_out'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_read=* with REMOTE_USER set still locks out clients

  $ REMOTE_USER=authed_user hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=stream_out'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_read=<user> denies access to unauthenticated user

  $ cat > .hg/hgrc <<EOF
  > [web]
  > deny_read = baduser1,baduser2
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_read=<user> denies access to users in deny list

  $ REMOTE_USER=baduser2 hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_read=<user> allows access to authenticated users not in list

  $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  200 Script output follows
  
  read-only command w/ defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found

  $ killdaemons.py

web.allow_read=* allows reads for unauthenticated users

  $ cat > .hg/hgrc <<EOF
  > [web]
  > allow_read = *
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  200 Script output follows
  
  read-only command w/ defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found

  $ killdaemons.py

web.allow_read=* allows read for authenticated user

  $ REMOTE_USER=authed_user hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  200 Script output follows
  
  read-only command w/ defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found

  $ killdaemons.py

web.allow_read=<user> does not allow unauthenticated users to read

  $ cat > .hg/hgrc <<EOF
  > [web]
  > allow_read = gooduser
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow_read=<user> does not allow user not in list to read

  $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow_read=<user> allows read from user in list

  $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  200 Script output follows
  
  read-only command w/ defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found

  $ killdaemons.py

web.deny_read takes precedence over web.allow_read

  $ cat > .hg/hgrc <<EOF
  > [web]
  > allow_read = baduser
  > deny_read = baduser
  > EOF

  $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow-pull=false denies read access to repo

  $ cat > .hg/hgrc <<EOF
  > [web]
  > allow-pull = false
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities'
  401 pull not authorized
  
  0
  pull not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 pull not authorized
  
  0
  pull not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 pull not authorized
  
  0
  pull not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 pull not authorized
  
  0
  pull not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

Attempting a write command with HTTP GET fails

  $ cat > .hg/hgrc <<EOF
  > EOF

  $ REQUEST_METHOD=GET hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg bookmarks
  no bookmarks set
  $ hg bookmark -d bm
  abort: bookmark 'bm' does not exist
  [10]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ killdaemons.py

Attempting a write command with an unknown HTTP verb fails

  $ REQUEST_METHOD=someverb hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg bookmarks
  no bookmarks set
  $ hg bookmark -d bm
  abort: bookmark 'bm' does not exist
  [10]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ killdaemons.py

Pushing on a plaintext channel is disabled by default

  $ cat > .hg/hgrc <<EOF
  > EOF

  $ REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  403 ssl required
  
  0
  ssl required
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  403 ssl required
  
  0
  ssl required
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  403 ssl required
  
  0
  ssl required
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  403 ssl required
  
  0
  ssl required
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: HTTP Error 403: ssl required
  [100]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: HTTP Error 403: ssl required
  [100]

  $ killdaemons.py

web.deny_push=* denies pushing to unauthenticated users

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > deny_push = *
  > EOF

  $ REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_push=* denies pushing to authenticated users

  $ REMOTE_USER=someuser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_push=<user> denies pushing to user in list

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > deny_push = baduser
  > EOF

  $ REMOTE_USER=baduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_push=<user> denies pushing to user not in list because allow-push isn't set

  $ REMOTE_USER=gooduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow-push=* allows pushes from unauthenticated users

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > allow-push = *
  > EOF

  $ REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  200 Script output follows
  
  1

  $ hg bookmarks
     bm                        0:cb9a9f314b8b
  $ hg book -d bm

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  200 Script output follows
  
  write command no defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  200 Script output follows
  
  write command w/ defined permissions

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  exporting bookmark bm
  [1]

  $ hg book -d bm

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

  $ hg strip -r 1:
  saved backup bundle to $TESTTMP/test/.hg/strip-backup/ba677d0156c1-eea704d7-backup.hg

  $ killdaemons.py

web.allow-push=* allows pushes from authenticated users

  $ REMOTE_USER=someuser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  200 Script output follows
  
  1

  $ hg bookmarks
     bm                        0:cb9a9f314b8b
  $ hg book -d bm

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  200 Script output follows
  
  write command no defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  200 Script output follows
  
  write command w/ defined permissions

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  exporting bookmark bm
  [1]

  $ hg book -d bm

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

  $ hg strip -r 1:
  saved backup bundle to $TESTTMP/test/.hg/strip-backup/ba677d0156c1-eea704d7-backup.hg

  $ killdaemons.py

web.allow-push=<user> denies push to user not in list

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > allow-push = gooduser
  > EOF

  $ REMOTE_USER=baduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow-push=<user> allows push from user in list

  $ REMOTE_USER=gooduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  200 Script output follows
  
  1

  $ hg bookmarks
     bm                        0:cb9a9f314b8b
  $ hg book -d bm

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  200 Script output follows
  
  1

  $ hg bookmarks
     bm                        0:cb9a9f314b8b
  $ hg book -d bm

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  200 Script output follows
  
  write command no defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  200 Script output follows
  
  write command w/ defined permissions

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  exporting bookmark bm
  [1]

  $ hg book -d bm

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

  $ hg strip -r 1:
  saved backup bundle to $TESTTMP/test/.hg/strip-backup/ba677d0156c1-eea704d7-backup.hg

  $ killdaemons.py

web.deny_push takes precedence over web.allow_push

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > allow-push = someuser
  > deny_push = someuser
  > EOF

  $ REMOTE_USER=someuser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow-push has no effect if web.deny_read is set

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > allow-push = *
  > deny_read = *
  > EOF

  $ REQUEST_METHOD=POST REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py