view tests/test-config.t @ 44412:edc8504bc26b

exchange: turn on option that makes concurrent pushes work better

The motivation is simply to make hg work better out of the box.

This is a slight backwards compatibility break, because client
extensions could have assumed that the list of heads the client sees
during discovery will be the list of heads during the entirety of the
push. It seems unlikely to matter, and not worth mentioning.

There's a fair amount of diff in tests, but this is just due to
sending a few more bytes on the wire, except for test-acl.t.
The extra "invalid branch cache" lines in test-acl.t don't seem to
indicate a problem: the branchcache now get computed during the bundle
application (because of the check:updated-heads bundle part), but
doesn't get rolled back when transactions rollback, thus causing a
message in the next operation computing the branch cache. Before this
change, I assume the branchcache was only computed on transaction
commit, so not computed at all when the transactions roll back, thus
no messages.

Differential Revision: https://phab.mercurial-scm.org/D8202

hide outer repo
  $ hg init

Invalid syntax: no value

  $ cat > .hg/hgrc << EOF
  > novaluekey
  > EOF
  $ hg showconfig
  hg: parse error at $TESTTMP/.hg/hgrc:1: novaluekey
  [255]

Invalid syntax: no key

  $ cat > .hg/hgrc << EOF
  > =nokeyvalue
  > EOF
  $ hg showconfig
  hg: parse error at $TESTTMP/.hg/hgrc:1: =nokeyvalue
  [255]

Test hint about invalid syntax from leading white space

  $ cat > .hg/hgrc << EOF
  >  key=value
  > EOF
  $ hg showconfig
  hg: parse error at $TESTTMP/.hg/hgrc:1:  key=value
  unexpected leading whitespace
  [255]

  $ cat > .hg/hgrc << EOF
  >  [section]
  > key=value
  > EOF
  $ hg showconfig
  hg: parse error at $TESTTMP/.hg/hgrc:1:  [section]
  unexpected leading whitespace
  [255]

Reset hgrc

  $ echo > .hg/hgrc

Test case sensitive configuration

  $ cat <<EOF >> $HGRCPATH
  > [Section]
  > KeY = Case Sensitive
  > key = lower case
  > EOF

  $ hg showconfig Section
  Section.KeY=Case Sensitive
  Section.key=lower case

  $ hg showconfig Section -Tjson
  [
   {
    "defaultvalue": null,
    "name": "Section.KeY",
    "source": "*.hgrc:*", (glob)
    "value": "Case Sensitive"
   },
   {
    "defaultvalue": null,
    "name": "Section.key",
    "source": "*.hgrc:*", (glob)
    "value": "lower case"
   }
  ]
  $ hg showconfig Section.KeY -Tjson
  [
   {
    "defaultvalue": null,
    "name": "Section.KeY",
    "source": "*.hgrc:*", (glob)
    "value": "Case Sensitive"
   }
  ]
  $ hg showconfig -Tjson | tail -7
   {
    "defaultvalue": null,
    "name": "*", (glob)
    "source": "*", (glob)
    "value": "*" (glob)
   }
  ]

Test config default of various types:

 {"defaultvalue": ""} for -T'json(defaultvalue)' looks weird, but that's
 how the templater works. Unknown keywords are evaluated to "".

 dynamicdefault

  $ hg config --config alias.foo= alias -Tjson
  [
   {
    "name": "alias.foo",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config alias.foo= alias -T'json(defaultvalue)'
  [
   {"defaultvalue": ""}
  ]
  $ hg config --config alias.foo= alias -T'{defaultvalue}\n'
  

 null

  $ hg config --config auth.cookiefile= auth -Tjson
  [
   {
    "defaultvalue": null,
    "name": "auth.cookiefile",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config auth.cookiefile= auth -T'json(defaultvalue)'
  [
   {"defaultvalue": null}
  ]
  $ hg config --config auth.cookiefile= auth -T'{defaultvalue}\n'
  

 false

  $ hg config --config commands.commit.post-status= commands -Tjson
  [
   {
    "defaultvalue": false,
    "name": "commands.commit.post-status",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config commands.commit.post-status= commands -T'json(defaultvalue)'
  [
   {"defaultvalue": false}
  ]
  $ hg config --config commands.commit.post-status= commands -T'{defaultvalue}\n'
  False

 true

  $ hg config --config format.dotencode= format -Tjson
  [
   {
    "defaultvalue": true,
    "name": "format.dotencode",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config format.dotencode= format -T'json(defaultvalue)'
  [
   {"defaultvalue": true}
  ]
  $ hg config --config format.dotencode= format -T'{defaultvalue}\n'
  True

 bytes

  $ hg config --config commands.resolve.mark-check= commands -Tjson
  [
   {
    "defaultvalue": "none",
    "name": "commands.resolve.mark-check",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config commands.resolve.mark-check= commands -T'json(defaultvalue)'
  [
   {"defaultvalue": "none"}
  ]
  $ hg config --config commands.resolve.mark-check= commands -T'{defaultvalue}\n'
  none

 empty list

  $ hg config --config commands.show.aliasprefix= commands -Tjson
  [
   {
    "defaultvalue": [],
    "name": "commands.show.aliasprefix",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config commands.show.aliasprefix= commands -T'json(defaultvalue)'
  [
   {"defaultvalue": []}
  ]
  $ hg config --config commands.show.aliasprefix= commands -T'{defaultvalue}\n'
  

 nonempty list

  $ hg config --config progress.format= progress -Tjson
  [
   {
    "defaultvalue": ["topic", "bar", "number", "estimate"],
    "name": "progress.format",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config progress.format= progress -T'json(defaultvalue)'
  [
   {"defaultvalue": ["topic", "bar", "number", "estimate"]}
  ]
  $ hg config --config progress.format= progress -T'{defaultvalue}\n'
  topic bar number estimate

 int

  $ hg config --config profiling.freq= profiling -Tjson
  [
   {
    "defaultvalue": 1000,
    "name": "profiling.freq",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config profiling.freq= profiling -T'json(defaultvalue)'
  [
   {"defaultvalue": 1000}
  ]
  $ hg config --config profiling.freq= profiling -T'{defaultvalue}\n'
  1000

 float

  $ hg config --config profiling.showmax= profiling -Tjson
  [
   {
    "defaultvalue": 0.999,
    "name": "profiling.showmax",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config profiling.showmax= profiling -T'json(defaultvalue)'
  [
   {"defaultvalue": 0.999}
  ]
  $ hg config --config profiling.showmax= profiling -T'{defaultvalue}\n'
  0.999

Test empty config source:

  $ cat <<EOF > emptysource.py
  > def reposetup(ui, repo):
  >     ui.setconfig(b'empty', b'source', b'value')
  > EOF
  $ cp .hg/hgrc .hg/hgrc.orig
  $ cat <<EOF >> .hg/hgrc
  > [extensions]
  > emptysource = `pwd`/emptysource.py
  > EOF

  $ hg config --debug empty.source
  read config from: * (glob)
  none: value
  $ hg config empty.source -Tjson
  [
   {
    "defaultvalue": null,
    "name": "empty.source",
    "source": "",
    "value": "value"
   }
  ]

  $ cp .hg/hgrc.orig .hg/hgrc

Test "%unset"

  $ cat >> $HGRCPATH <<EOF
  > [unsettest]
  > local-hgrcpath = should be unset (HGRCPATH)
  > %unset local-hgrcpath
  > 
  > global = should be unset (HGRCPATH)
  > 
  > both = should be unset (HGRCPATH)
  > 
  > set-after-unset = should be unset (HGRCPATH)
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [unsettest]
  > local-hgrc = should be unset (.hg/hgrc)
  > %unset local-hgrc
  > 
  > %unset global
  > 
  > both = should be unset (.hg/hgrc)
  > %unset both
  > 
  > set-after-unset = should be unset (.hg/hgrc)
  > %unset set-after-unset
  > set-after-unset = should be set (.hg/hgrc)
  > EOF

  $ hg showconfig unsettest
  unsettest.set-after-unset=should be set (.hg/hgrc)

Test exit code when no config matches

  $ hg config Section.idontexist
  [1]

sub-options in [paths] aren't expanded

  $ cat > .hg/hgrc << EOF
  > [paths]
  > foo = ~/foo
  > foo:suboption = ~/foo
  > EOF

  $ hg showconfig paths
  paths.foo:suboption=~/foo
  paths.foo=$TESTTMP/foo

edit failure

  $ HGEDITOR=false hg config --edit
  abort: edit failed: false exited with status 1
  [255]

config affected by environment variables

  $ EDITOR=e1 VISUAL=e2 hg config --debug | grep 'ui\.editor'
  $VISUAL: ui.editor=e2

  $ VISUAL=e2 hg config --debug --config ui.editor=e3 | grep 'ui\.editor'
  --config: ui.editor=e3

  $ PAGER=p1 hg config --debug | grep 'pager\.pager'
  $PAGER: pager.pager=p1

  $ PAGER=p1 hg config --debug --config pager.pager=p2 | grep 'pager\.pager'
  --config: pager.pager=p2

verify that aliases are evaluated as well

  $ hg init aliastest
  $ cd aliastest
  $ cat > .hg/hgrc << EOF
  > [ui]
  > user = repo user
  > EOF
  $ touch index
  $ unset HGUSER
  $ hg ci -Am test
  adding index
  $ hg log --template '{author}\n'
  repo user
  $ cd ..

alias has lower priority

  $ hg init aliaspriority
  $ cd aliaspriority
  $ cat > .hg/hgrc << EOF
  > [ui]
  > user = alias user
  > username = repo user
  > EOF
  $ touch index
  $ unset HGUSER
  $ hg ci -Am test
  adding index
  $ hg log --template '{author}\n'
  repo user
  $ cd ..

configs should be read in lexicographical order

  $ mkdir configs
  $ for i in `$TESTDIR/seq.py 10 99`; do
  >    printf "[section]\nkey=$i" > configs/$i.rc
  > done
  $ HGRCPATH=configs hg config section.key
  99