view tests/test-contrib-testparseutil.t @ 44412:edc8504bc26b

exchange: turn on option that makes concurrent pushes work better

The motivation is simply to make hg work better out of the box.

This is a slight backwards compatibility break, because client
extensions could have assumed that the list of heads the client sees
during discovery will be the list of heads during the entirety of the
push. It seems unlikely to matter, and not worth mentioning.

There's a fair amount of diff in tests, but this is just due to
sending a few more bytes on the wire, except for test-acl.t.
The extra "invalid branch cache" lines in test-acl.t don't seem to
indicate a problem: the branchcache now get computed during the bundle
application (because of the check:updated-heads bundle part), but
doesn't get rolled back when transactions rollback, thus causing a
message in the next operation computing the branch cache. Before this
change, I assume the branchcache was only computed on transaction
commit, so not computed at all when the transactions roll back, thus
no messages.

Differential Revision: https://phab.mercurial-scm.org/D8202

  $ testparseutil="$TESTDIR"/../contrib/testparseutil.py

Internal test by doctest

  $ "$PYTHON" -m doctest "$testparseutil"

Tests for embedded python script

Typical cases

  $ "$PYTHON" "$testparseutil" -v pyembedded <<NO_CHECK_EOF
  >   >>> for f in [1, 2, 3]:
  >   ...     foo = 1
  >   >>> foo = 2
  >   $ echo "doctest is terminated by command, empty line, or comment"
  >   >>> foo = 31
  >   expected output of doctest fragment
  >   >>> foo = 32
  >   
  >   >>> foo = 33
  > 
  >   >>> foo = 34
  > comment
  >   >>> foo = 35
  > 
  >   $ "\$PYTHON" <<EOF
  >   > foo = 4
  >   > 
  >   > EOF
  >   $ cat > foo.py <<EOF
  >   > foo = 5
  >   > EOF
  >   $ cat >> foo.py <<EOF
  >   > foo = 6 # appended
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ "\$PYTHON" <<NO_CHECK_EOF
  >   > foo = 7 # this should be ignored at detection
  >   > NO_CHECK_EOF
  >   $ cat > foo.py <<NO_CHECK_EOF
  >   > foo = 8 # this should be ignored at detection
  >   > NO_CHECK_EOF
  > 
  > doctest fragment ended by EOF
  > 
  >   >>> foo = 9
  > NO_CHECK_EOF
  <stdin>:1: <anonymous> starts
    |for f in [1, 2, 3]:
    |    foo = 1
    |foo = 2
  <stdin>:4: <anonymous> ends
  <stdin>:5: <anonymous> starts
    |foo = 31
    |
    |foo = 32
    |
    |foo = 33
  <stdin>:10: <anonymous> ends
  <stdin>:11: <anonymous> starts
    |foo = 34
  <stdin>:12: <anonymous> ends
  <stdin>:13: <anonymous> starts
    |foo = 35
  <stdin>:14: <anonymous> ends
  <stdin>:16: <anonymous> starts
    |foo = 4
    |
  <stdin>:18: <anonymous> ends
  <stdin>:20: foo.py starts
    |foo = 5
  <stdin>:21: foo.py ends
  <stdin>:23: foo.py starts
    |foo = 6 # appended
  <stdin>:24: foo.py ends
  <stdin>:38: <anonymous> starts
    |foo = 9
  <stdin>:39: <anonymous> ends

Invalid test script

(similar test for shell script and hgrc configuration is omitted,
because this tests common base class of them)

  $ "$PYTHON" "$testparseutil" -v pyembedded <<NO_CHECK_EOF > detected
  >   $ "\$PYTHON" <<EOF
  >   > foo = 1
  > 
  >   $ "\$PYTHON" <<EOF
  >   > foo = 2
  >   $ cat > bar.py <<EOF
  >   > bar = 2 # this fragment will be detected as expected
  >   > EOF
  > 
  >   $ cat > foo.py <<EOF
  >   > foo = 3
  > NO_CHECK_EOF
  <stdin>:3: unexpected line for "heredoc python invocation"
  <stdin>:6: unexpected line for "heredoc python invocation"
  <stdin>:11: unexpected end of file for "heredoc .py file"
  [1]
  $ cat detected
  <stdin>:7: bar.py starts
    |bar = 2 # this fragment will be detected as expected
  <stdin>:8: bar.py ends

Tests for embedded shell script

  $ "$PYTHON" "$testparseutil" -v shembedded <<NO_CHECK_EOF
  >   $ cat > foo.sh <<EOF
  >   > foo = 1
  >   > 
  >   > foo = 2
  >   > EOF
  >   $ cat >> foo.sh <<EOF
  >   > foo = 3 # appended
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ cat > foo.sh <<NO_CHECK_EOF
  >   > # this should be ignored at detection
  >   > foo = 4
  >   > NO_CHECK_EOF
  > 
  > NO_CHECK_EOF
  <stdin>:2: foo.sh starts
    |foo = 1
    |
    |foo = 2
  <stdin>:5: foo.sh ends
  <stdin>:7: foo.sh starts
    |foo = 3 # appended
  <stdin>:8: foo.sh ends

Tests for embedded hgrc configuration

  $ "$PYTHON" "$testparseutil" -v hgrcembedded <<NO_CHECK_EOF
  >   $ cat > .hg/hgrc <<EOF
  >   > [ui]
  >   > verbose = true
  >   > 
  >   > # end of local configuration
  >   > EOF
  > 
  >   $ cat > \$HGRCPATH <<EOF
  >   > [extensions]
  >   > rebase =
  >   > # end of global configuration
  >   > EOF
  > 
  >   $ cat >> \$HGRCPATH <<EOF
  >   > # appended
  >   > [extensions]
  >   > rebase =!
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ cat > .hg/hgrc <<NO_CHECK_EOF
  >   > # this local configuration should be ignored at detection
  >   > [ui]
  >   > username = foo bar
  >   > NO_CHECK_EOF
  > 
  >   $ cat > \$HGRCPATH <<NO_CHECK_EOF
  >   > # this global configuration should be ignored at detection
  >   > [extensions]
  >   > foobar =
  >   > NO_CHECK_EOF
  > NO_CHECK_EOF
  <stdin>:2: .hg/hgrc starts
    |[ui]
    |verbose = true
    |
    |# end of local configuration
  <stdin>:6: .hg/hgrc ends
  <stdin>:9: $HGRCPATH starts
    |[extensions]
    |rebase =
    |# end of global configuration
  <stdin>:12: $HGRCPATH ends
  <stdin>:15: $HGRCPATH starts
    |# appended
    |[extensions]
    |rebase =!
  <stdin>:18: $HGRCPATH ends