view tests/test-convert-bzr.t @ 44412:edc8504bc26b

exchange: turn on option that makes concurrent pushes work better

The motivation is simply to make hg work better out of the box.

This is a slight backwards compatibility break, because client
extensions could have assumed that the list of heads the client sees
during discovery will be the list of heads during the entirety of the
push. It seems unlikely to matter, and not worth mentioning.

There's a fair amount of diff in tests, but this is just due to
sending a few more bytes on the wire, except for test-acl.t.
The extra "invalid branch cache" lines in test-acl.t don't seem to
indicate a problem: the branchcache now get computed during the bundle
application (because of the check:updated-heads bundle part), but
doesn't get rolled back when transactions rollback, thus causing a
message in the next operation computing the branch cache. Before this
change, I assume the branchcache was only computed on transaction
commit, so not computed at all when the transactions roll back, thus
no messages.

Differential Revision: https://phab.mercurial-scm.org/D8202

#require bzr

  $ . "$TESTDIR/bzr-definitions"

create and rename on the same file in the same step

  $ mkdir test-createandrename
  $ cd test-createandrename
  $ bzr init -q source

test empty repo conversion (issue3233)

  $ hg convert source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...

back to the rename stuff

  $ cd source
  $ echo a > a
  $ echo c > c
  $ echo e > e
  $ bzr add -q a c e
  $ bzr commit -q -m 'Initial add: a, c, e'
  $ bzr mv a b
  a => b
  $ bzr mv c d
  c => d
  $ bzr mv e f
  e => f
  $ echo a2 >> a
  $ mkdir e
  $ bzr add -q a e
  $ bzr commit -q -m 'rename a into b, create a, rename c into d'
  $ cd ..
  $ hg convert source source-hg
  scanning source...
  sorting...
  converting...
  1 Initial add: a, c, e
  0 rename a into b, create a, rename c into d
  $ glog -R source-hg
  o  1@source "rename a into b, create a, rename c into d" files+: [b d f], files-: [c e], files: [a]
  |
  o  0@source "Initial add: a, c, e" files+: [a c e], files-: [], files: []
  

manifest

  $ hg manifest -R source-hg -r tip
  a
  b
  d
  f

test --rev option

  $ hg convert -r 1 source source-1-hg
  initializing destination source-1-hg repository
  scanning source...
  sorting...
  converting...
  0 Initial add: a, c, e
  $ glog -R source-1-hg
  o  0@source "Initial add: a, c, e" files+: [a c e], files-: [], files: []
  

test with filemap

  $ cat > filemap <<EOF
  > exclude a
  > EOF
  $ hg convert --filemap filemap source source-filemap-hg
  initializing destination source-filemap-hg repository
  scanning source...
  sorting...
  converting...
  1 Initial add: a, c, e
  0 rename a into b, create a, rename c into d
  $ hg -R source-filemap-hg manifest -r tip
  b
  d
  f

convert from lightweight checkout

  $ bzr checkout --lightweight source source-light
  $ hg convert -s bzr source-light source-light-hg
  initializing destination source-light-hg repository
  warning: lightweight checkouts may cause conversion failures, try with a regular branch instead.
  $TESTTMP/test-createandrename/source-light does not look like a Bazaar repository
  abort: source-light: missing or unsupported repository
  [255]

extract timestamps that look just like hg's {date|isodate}:
yyyy-mm-dd HH:MM zzzz (no seconds!)
compare timestamps

  $ cd source
  $ bzr log | \
  >   sed '/timestamp/!d;s/.\{15\}\([0-9: -]\{16\}\):.. \(.[0-9]\{4\}\)/\1 \2/' \
  >   > ../bzr-timestamps
  $ cd ..
  $ hg -R source-hg log --template "{date|isodate}\n" > hg-timestamps
  $ cmp bzr-timestamps hg-timestamps || diff -u bzr-timestamps hg-timestamps
  $ cd ..

merge

  $ mkdir test-merge
  $ cd test-merge
  $ cat > helper.py <<EOF
  > import sys
  > from bzrlib import workingtree
  > wt = workingtree.WorkingTree.open('.')
  > 
  > message, stamp = sys.argv[1:]
  > wt.commit(message, timestamp=int(stamp))
  > EOF
  $ bzr init -q source
  $ cd source
  $ echo content > a
  $ echo content2 > b
  $ bzr add -q a b
  $ bzr commit -q -m 'Initial add'
  $ cd ..
  $ bzr branch -q source source-improve
  $ cd source
  $ echo more >> a
  $ "$PYTHON" ../helper.py 'Editing a' 100
  $ cd ../source-improve
  $ echo content3 >> b
  $ "$PYTHON" ../helper.py 'Editing b' 200
  $ cd ../source
  $ bzr merge -q ../source-improve
  $ bzr commit -q -m 'Merged improve branch'
  $ cd ..
  $ hg convert --datesort source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...
  3 Initial add
  2 Editing a
  1 Editing b
  0 Merged improve branch
  $ glog -R source-hg
  o    3@source "Merged improve branch" files+: [], files-: [], files: []
  |\
  | o  2@source-improve "Editing b" files+: [], files-: [], files: [b]
  | |
  o |  1@source "Editing a" files+: [], files-: [], files: [a]
  |/
  o  0@source "Initial add" files+: [a b], files-: [], files: []
  
  $ cd ..

#if symlink execbit

symlinks and executable files

  $ mkdir test-symlinks
  $ cd test-symlinks
  $ bzr init -q source
  $ cd source
  $ touch program
  $ chmod +x program
  $ ln -s program altname
  $ mkdir d
  $ echo a > d/a
  $ ln -s a syma
  $ bzr add -q altname program syma d/a
  $ bzr commit -q -m 'Initial setup'
  $ touch newprog
  $ chmod +x newprog
  $ rm altname
  $ ln -s newprog altname
  $ chmod -x program
  $ bzr add -q newprog
  $ bzr commit -q -m 'Symlink changed, x bits changed'
  $ cd ..
  $ hg convert source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...
  1 Initial setup
  0 Symlink changed, x bits changed
  $ manifest source-hg 0
  % manifest of 0
  644 @ altname
  644   d/a
  755 * program
  644 @ syma
  $ manifest source-hg tip
  % manifest of tip
  644 @ altname
  644   d/a
  755 * newprog
  644   program
  644 @ syma

test the symlinks can be recreated

  $ cd source-hg
  $ hg up
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg cat syma; echo
  a
  $ cd ../..

#endif

Multiple branches

  $ bzr init-repo -q --no-trees repo
  $ bzr init -q repo/trunk
  $ bzr co repo/trunk repo-trunk
  $ cd repo-trunk
  $ echo a > a
  $ bzr add -q a
  $ bzr ci -qm adda
  $ bzr tag trunk-tag
  Created tag trunk-tag.
  $ bzr switch -b branch
  Tree is up to date at revision 1.
  Switched to branch*repo/branch/ (glob)
  $ sleep 1
  $ echo b > b
  $ bzr add -q b
  $ bzr ci -qm addb
  $ bzr tag branch-tag
  Created tag branch-tag.
  $ bzr switch --force ../repo/trunk
  Updated to revision 1.
  Switched to branch*/repo/trunk/ (glob)
  $ sleep 1
  $ echo a >> a
  $ bzr ci -qm changea
  $ cd ..
  $ hg convert --datesort repo repo-bzr
  initializing destination repo-bzr repository
  scanning source...
  sorting...
  converting...
  2 adda
  1 addb
  0 changea
  updating tags
  $ (cd repo-bzr; glog)
  o  3@default "update tags" files+: [.hgtags], files-: [], files: []
  |
  o  2@default "changea" files+: [], files-: [], files: [a]
  |
  | o  1@branch "addb" files+: [b], files-: [], files: []
  |/
  o  0@default "adda" files+: [a], files-: [], files: []
  

Test tags (converted identifiers are not stable because bzr ones are
not and get incorporated in extra fields).

  $ hg -R repo-bzr tags
  tip                                3:* (glob)
  branch-tag                         1:* (glob)
  trunk-tag                          0:* (glob)

Nested repositories (issue3254)

  $ bzr init-repo -q --no-trees repo/inner
  $ bzr init -q repo/inner/trunk
  $ bzr co repo/inner/trunk inner-trunk
  $ cd inner-trunk
  $ echo b > b
  $ bzr add -q b
  $ bzr ci -qm addb
  $ cd ..
  $ hg convert --datesort repo noinner-bzr
  initializing destination noinner-bzr repository
  scanning source...
  sorting...
  converting...
  2 adda
  1 addb
  0 changea
  updating tags