view tests/test-exchange-obsmarkers-case-A6.t @ 44412:edc8504bc26b

exchange: turn on option that makes concurrent pushes work better

The motivation is simply to make hg work better out of the box.

This is a slight backwards compatibility break, because client
extensions could have assumed that the list of heads the client sees
during discovery will be the list of heads during the entirety of the
push. It seems unlikely to matter, and not worth mentioning.

There's a fair amount of diff in tests, but this is just due to
sending a few more bytes on the wire, except for test-acl.t.
The extra "invalid branch cache" lines in test-acl.t don't seem to
indicate a problem: the branchcache now get computed during the bundle
application (because of the check:updated-heads bundle part), but
doesn't get rolled back when transactions rollback, thus causing a
message in the next operation computing the branch cache. Before this
change, I assume the branchcache was only computed on transaction
commit, so not computed at all when the transactions roll back, thus
no messages.

Differential Revision: https://phab.mercurial-scm.org/D8202

============================================
Testing obsolescence markers push: Cases A.6
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category A: simple cases
TestCase 6: new markers between changesets already known on both side
Variants:
# a: explicit push
# b: bare push

A.6  new markers between changesets already known on both side
==============================================================

.. {{{
..   A ◕⇠● B
..     |/
..     ● O
.. }}}
..
.. Marker exist from:
..
..  * `A◕⇠● B`
..
.. Command runs:
..
..  * hg push -r B
..  * hg push
..
.. Expected exchange:
..
..  * `A◕⇠● B`

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos A.6
  creating test repo for test case A.6
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ hg update -q 0
  $ mkcommit A1
  created new head

make both changeset known in remote

  $ hg push -qf ../pushdest
  $ hg push -qf ../pulldest

create a marker after this

  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  1 new obsolescence markers
  obsoleted 1 changesets
  $ hg log -G --hidden
  @  e5ea8f9c7314 (draft): A1
  |
  | x  28b51eb45704 (draft): A0
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

  $ cp -R A.6 A.6.a
  $ cp -R A.6 A.6.b

Actual Test (explicit push version)
-----------------------------------

  $ dotest A.6.a A1
  ## Running testcase A.6.a
  # testing echange of "A1" (e5ea8f9c7314)
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A1" from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  remote: obsoleted 1 changesets
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "e5ea8f9c7314" from main into pulldest
  pulling from main
  no changes found
  1 new obsolescence markers
  obsoleted 1 changesets
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Actual Test (bare push version)
-------------------------------

  $ dotest A.6.b
  ## Running testcase A.6.b
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  remote: obsoleted 1 changesets
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  no changes found
  1 new obsolescence markers
  obsoleted 1 changesets
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}