view tests/test-narrow-share.t @ 44412:edc8504bc26b

exchange: turn on option that makes concurrent pushes work better

The motivation is simply to make hg work better out of the box.

This is a slight backwards compatibility break, because client
extensions could have assumed that the list of heads the client sees
during discovery will be the list of heads during the entirety of the
push. It seems unlikely to matter, and not worth mentioning.

There's a fair amount of diff in tests, but this is just due to
sending a few more bytes on the wire, except for test-acl.t.
The extra "invalid branch cache" lines in test-acl.t don't seem to
indicate a problem: the branchcache now get computed during the bundle
application (because of the check:updated-heads bundle part), but
doesn't get rolled back when transactions rollback, thus causing a
message in the next operation computing the branch cache. Before this
change, I assume the branchcache was only computed on transaction
commit, so not computed at all when the transactions roll back, thus
no messages.

Differential Revision: https://phab.mercurial-scm.org/D8202

#testcases flat tree

  $ . "$TESTDIR/narrow-library.sh"

#if tree
  $ cat << EOF >> $HGRCPATH
  > [experimental]
  > treemanifest = 1
  > EOF
#endif

  $ cat << EOF >> $HGRCPATH
  > [extensions]
  > share =
  > EOF

  $ hg init remote
  $ cd remote
  $ for x in `$TESTDIR/seq.py 0 10`
  > do
  >   mkdir d$x
  >   echo $x > d$x/f
  >   hg add d$x/f
  >   hg commit -m "add d$x/f"
  > done
  $ cd ..

  $ hg clone --narrow ssh://user@dummy/remote main -q \
  > --include d1 --include d3 --include d5 --include d7

Ignore file called "ignored"
  $ echo ignored > main/.hgignore

  $ hg share main share
  updating working directory
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R share tracked
  I path:d1
  I path:d3
  I path:d5
  I path:d7
  $ hg -R share files
  share/d1/f
  share/d3/f
  share/d5/f
  share/d7/f

Narrow the share and check that the main repo's working copy gets updated

# Make sure the files that are supposed to be known-clean get their timestamps set in the dirstate
  $ sleep 2
  $ hg -R main st
  $ hg -R main debugdirstate --no-dates
  n 644          2 set                 d1/f
  n 644          2 set                 d3/f
  n 644          2 set                 d5/f
  n 644          2 set                 d7/f
# Make d3/f dirty
  $ echo x >> main/d3/f
  $ echo y >> main/d3/g
  $ touch main/d3/ignored
  $ touch main/d3/untracked
  $ hg add main/d3/g
  $ hg -R main st
  M d3/f
  A d3/g
  ? d3/untracked
# Make d5/f not match the dirstate timestamp even though it's clean
  $ sleep 2
  $ hg -R main st
  M d3/f
  A d3/g
  ? d3/untracked
  $ hg -R main debugdirstate --no-dates
  n 644          2 set                 d1/f
  n 644          2 set                 d3/f
  a   0         -1 unset               d3/g
  n 644          2 set                 d5/f
  n 644          2 set                 d7/f
  $ touch main/d5/f
  $ hg -R share tracked --removeinclude d1 --removeinclude d3 --removeinclude d5
  comparing with ssh://user@dummy/remote
  searching for changes
  looking for local changes to affected paths
  deleting data/d1/f.i
  deleting data/d3/f.i
  deleting data/d5/f.i
  deleting meta/d1/00manifest.i (tree !)
  deleting meta/d3/00manifest.i (tree !)
  deleting meta/d5/00manifest.i (tree !)
  $ hg -R main tracked
  I path:d7
  $ hg -R main files
  abort: working copy's narrowspec is stale
  (run 'hg tracked --update-working-copy')
  [255]
  $ hg -R main tracked --update-working-copy
  not deleting possibly dirty file d3/f
  not deleting possibly dirty file d3/g
  not deleting possibly dirty file d5/f
  not deleting unknown file d3/untracked
  not deleting ignored file d3/ignored
# d1/f, d3/f, d3/g and d5/f should no longer be reported
  $ hg -R main files
  main/d7/f
# d1/f should no longer be there, d3/f should be since it was dirty, d3/g should be there since
# it was added, and d5/f should be since we couldn't be sure it was clean
  $ find main/d* -type f | sort
  main/d3/f
  main/d3/g
  main/d3/ignored
  main/d3/untracked
  main/d5/f
  main/d7/f

Widen the share and check that the main repo's working copy gets updated

  $ hg -R share tracked --addinclude d1 --addinclude d3 -q
  $ hg -R share tracked
  I path:d1
  I path:d3
  I path:d7
  $ hg -R share files
  share/d1/f
  share/d3/f
  share/d7/f
  $ hg -R main tracked
  I path:d1
  I path:d3
  I path:d7
  $ hg -R main files
  abort: working copy's narrowspec is stale
  (run 'hg tracked --update-working-copy')
  [255]
  $ hg -R main tracked --update-working-copy
# d1/f, d3/f should be back
  $ hg -R main files
  main/d1/f
  main/d3/f
  main/d7/f
# d3/f should be modified (not clobbered by the widening), and d3/g should be untracked
  $ hg -R main st --all
  M d3/f
  ? d3/g
  ? d3/untracked
  I d3/ignored
  C d1/f
  C d7/f

We should also be able to unshare without breaking everything:

  $ hg share main share-unshare
  updating working directory
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd share-unshare
  $ hg unshare
  $ hg verify
  checking changesets
  checking manifests
  checking directory manifests (tree !)
  crosschecking files in changesets and manifests
  checking files
  checked 11 changesets with 3 changes to 3 files
  $ cd ..

Dirstate should be left alone when upgrading from version of hg that didn't support narrow+share

  $ hg share main share-upgrade
  updating working directory
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd share-upgrade
  $ echo x >> d1/f
  $ echo y >> d3/g
  $ hg add d3/g
  $ hg rm d7/f
  $ hg st
  M d1/f
  A d3/g
  R d7/f
Make it look like a repo from before narrow+share was supported
  $ rm .hg/narrowspec.dirstate
  $ hg ci -Am test
  abort: working copy's narrowspec is stale
  (run 'hg tracked --update-working-copy')
  [255]
  $ hg tracked --update-working-copy
  $ hg st
  M d1/f
  A d3/g
  R d7/f
  $ cd ..