Mercurial > hg
view mercurial/diffhelper.py @ 39627:ee7ee0c516ca
narrow: intersect provided matcher with narrowmatcher in `hg diff`
This provides significant speedups when running diff, and no change in behavior
that I'm aware of (or that the tests found). I tested with a repo that I started
using narrow in after it was created and attempted to run `hg diff -c .` and
similar commands in it on a commit that had files not in the narrowspec.
Timing numbers below, using a similar setup as my previous commits.
before=9db85644, m-u is mozilla-unified at eb39298e432d (flatmanifest) and
0553b7f29eaf (treemanifest). l-d-r is a repo simulating a situation I've
encountered where there's one directory with 30k+ subdirectories. N means
narrow, T means treemanifest. The narrowspec is pretty small when in use, and
importantly the narrowspec is applied *after* doing the initial checkout
(without narrowing), so all of these files exist in the filesystem, which is not
normally the case if someone has been using narrow for the entire life of the
clone.
Anything less than a 5% difference in performance is most likely noise.
diff --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.292 s +- 0.009 s | 1.295 s +- 0.010 s | 100.2%
m-u | | x | 1.296 s +- 0.042 s | 1.299 s +- 0.026 s | 100.2%
m-u | x | | 1.292 s +- 0.010 s | 1.297 s +- 0.021 s | 100.4%
m-u | x | x | 84.2 ms +- 1.2 ms | 83.6 ms +- 0.2 ms | 99.3%
l-d-r | | | 188.7 ms +- 2.7 ms | 188.8 ms +- 2.0 ms | 100.1%
l-d-r | | x | 189.9 ms +- 1.5 ms | 189.4 ms +- 1.2 ms | 99.7%
l-d-r | x | | 97.1 ms +- 1.0 ms | 87.1 ms +- 1.0 ms | 89.7% <--
l-d-r | x | x | 96.9 ms +- 0.8 ms | 87.2 ms +- 0.7 ms | 90.0% <--
diff -c . --git:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 231.6 ms +- 3.1 ms | 228.9 ms +- 1.6 ms | 98.8%
m-u | | x | 150.5 ms +- 1.7 ms | 150.7 ms +- 1.4 ms | 100.1%
m-u | x | | 233.7 ms +- 2.4 ms | 232.2 ms +- 1.9 ms | 99.4%
m-u | x | x | 126.1 ms +- 1.2 ms | 126.8 ms +- 1.2 ms | 100.6%
l-d-r | | | 82.1 ms +- 2.0 ms | 81.8 ms +- 1.4 ms | 99.6%
l-d-r | | x | 3.732 s +- 0.020 s | 3.746 s +- 0.027 s | 100.4%
l-d-r | x | | 83.1 ms +- 0.8 ms | 107.6 ms +- 2.4 ms | 129.5% <--
l-d-r | x | x | 758.2 ms +- 38.8 ms | 188.5 ms +- 1.8 ms | 24.9% <--
rebase -r . --keep -d .^^:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 5.532 s +- 0.087 s | 5.496 s +- 0.016 s | 99.3%
m-u | | x | 5.554 s +- 0.061 s | 5.532 s +- 0.013 s | 99.6%
m-u | x | | 5.602 s +- 0.134 s | 5.508 s +- 0.035 s | 98.3%
m-u | x | x | 582.2 ms +- 15.2 ms | 572.9 ms +- 12.0 ms | 98.4%
l-d-r | | | 629.5 ms +- 12.3 ms | 622.5 ms +- 7.3 ms | 98.9%
l-d-r | | x | 6.173 s +- 0.062 s | 6.185 s +- 0.076 s | 100.2%
l-d-r | x | | 274.5 ms +- 10.0 ms | 272.1 ms +- 6.2 ms | 99.1%
l-d-r | x | x | 4.835 s +- 0.056 s | 4.826 s +- 0.034 s | 99.8%
status --change . --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 214.4 ms +- 1.4 ms | 212.2 ms +- 1.7 ms | 99.0%
m-u | | x | 130.9 ms +- 1.2 ms | 131.7 ms +- 1.1 ms | 100.6%
m-u | x | | 215.0 ms +- 2.1 ms | 214.9 ms +- 2.7 ms | 100.0%
m-u | x | x | 109.5 ms +- 2.3 ms | 107.8 ms +- 0.9 ms | 98.4%
l-d-r | | | 79.6 ms +- 0.9 ms | 79.8 ms +- 1.6 ms | 100.3%
l-d-r | | x | 3.799 s +- 0.037 s | 3.928 s +- 0.021 s | 103.4% <--?
l-d-r | x | | 82.7 ms +- 0.7 ms | 83.2 ms +- 1.0 ms | 100.6%
l-d-r | x | x | 746.8 ms +- 6.1 ms | 739.0 ms +- 4.2 ms | 99.0%
status --copies:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.884 s +- 0.012 s | 1.885 s +- 0.013 s | 100.1%
m-u | | x | 1.897 s +- 0.027 s | 1.909 s +- 0.077 s | 100.6%
m-u | x | | 1.886 s +- 0.021 s | 1.891 s +- 0.030 s | 100.3%
m-u | x | x | 92.0 ms +- 0.7 ms | 92.4 ms +- 0.4 ms | 100.4%
l-d-r | | | 570.3 ms +- 18.7 ms | 552.2 ms +- 4.5 ms | 96.8%
l-d-r | | x | 568.9 ms +- 16.1 ms | 567.2 ms +- 11.9 ms | 99.7%
l-d-r | x | | 171.1 ms +- 2.5 ms | 170.4 ms +- 1.2 ms | 99.6%
l-d-r | x | x | 171.6 ms +- 3.4 ms | 171.5 ms +- 1.7 ms | 99.9%
update $rev^; ~/src/hg/hg{hg}/hg update $rev:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 3.107 s +- 0.017 s | 3.116 s +- 0.012 s | 100.3%
m-u | | x | 2.943 s +- 0.010 s | 2.945 s +- 0.019 s | 100.1%
m-u | x | | 3.116 s +- 0.033 s | 3.118 s +- 0.027 s | 100.1%
m-u | x | x | 318.5 ms +- 2.7 ms | 320.8 ms +- 4.8 ms | 100.7%
l-d-r | | | 428.9 ms +- 4.4 ms | 429.5 ms +- 4.0 ms | 100.1%
l-d-r | | x | 9.593 s +- 0.081 s | 9.869 s +- 0.043 s | 102.9%
l-d-r | x | | 253.2 ms +- 3.6 ms | 254.0 ms +- 2.8 ms | 100.3%
l-d-r | x | x | 1.613 s +- 0.009 s | 1.630 s +- 0.017 s | 101.1%
Differential Revision: https://phab.mercurial-scm.org/D4587
author | spectral <spectral@google.com> |
---|---|
date | Thu, 13 Sep 2018 22:48:27 -0700 |
parents | e7aa113b14f7 |
children | 57875cf423c9 |
line wrap: on
line source
# diffhelper.py - helper routines for patch # # Copyright 2009 Matt Mackall <mpm@selenic.com> and others # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. from __future__ import absolute_import from .i18n import _ from . import ( error, pycompat, ) def addlines(fp, hunk, lena, lenb, a, b): """Read lines from fp into the hunk The hunk is parsed into two arrays, a and b. a gets the old state of the text, b gets the new state. The control char from the hunk is saved when inserting into a, but not b (for performance while deleting files.) """ while True: todoa = lena - len(a) todob = lenb - len(b) num = max(todoa, todob) if num == 0: break for i in pycompat.xrange(num): s = fp.readline() if not s: raise error.ParseError(_('incomplete hunk')) if s == "\\ No newline at end of file\n": fixnewline(hunk, a, b) continue if s == '\n' or s == '\r\n': # Some patches may be missing the control char # on empty lines. Supply a leading space. s = ' ' + s hunk.append(s) if s.startswith('+'): b.append(s[1:]) elif s.startswith('-'): a.append(s) else: b.append(s[1:]) a.append(s) def fixnewline(hunk, a, b): """Fix up the last lines of a and b when the patch has no newline at EOF""" l = hunk[-1] # tolerate CRLF in last line if l.endswith('\r\n'): hline = l[:-2] else: hline = l[:-1] if hline.startswith((' ', '+')): b[-1] = hline[1:] if hline.startswith((' ', '-')): a[-1] = hline hunk[-1] = hline def testhunk(a, b, bstart): """Compare the lines in a with the lines in b a is assumed to have a control char at the start of each line, this char is ignored in the compare. """ alen = len(a) blen = len(b) if alen > blen - bstart or bstart < 0: return False for i in pycompat.xrange(alen): if a[i][1:] != b[i + bstart]: return False return True