revert: add an XXX about rename tracking
We check for rename information in the dirstate. This is probably not enough to
preserve this behavior when using an explicit target rev.
I just spotted this while working on this code, but this is outside the scope
of my series so I'm just adding a comment to highlight this suspicious
situation.
#require serve
$ hg init test
$ cd test
$ echo foo>foo
$ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
$ echo foo>foo.d/foo
$ echo bar>foo.d/bAr.hg.d/BaR
$ echo bar>foo.d/baR.d.hg/bAR
$ hg commit -A -m 1
adding foo
adding foo.d/bAr.hg.d/BaR
adding foo.d/baR.d.hg/bAR
adding foo.d/foo
$ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log
$ hg --config server.uncompressed=False serve -p $HGPORT1 -d --pid-file=../hg2.pid
Test server address cannot be reused
#if windows
$ hg serve -p $HGPORT1 2>&1
abort: cannot start server at ':$HGPORT1': * (glob)
[255]
#else
$ hg serve -p $HGPORT1 2>&1
abort: cannot start server at ':$HGPORT1': Address already in use
[255]
#endif
$ cd ..
$ cat hg1.pid hg2.pid >> $DAEMON_PIDS
clone via stream
$ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1
streaming all changes
6 files to transfer, 606 bytes of data
transferred * bytes in * seconds (*/sec) (glob)
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R copy
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
4 files, 1 changesets, 4 total revisions
try to clone via stream, should use pull instead
$ hg clone --uncompressed http://localhost:$HGPORT1/ copy2
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
clone via pull
$ hg clone http://localhost:$HGPORT1/ copy-pull
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R copy-pull
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
4 files, 1 changesets, 4 total revisions
$ cd test
$ echo bar > bar
$ hg commit -A -d '1 0' -m 2
adding bar
$ cd ..
clone over http with --update
$ hg clone http://localhost:$HGPORT1/ updated --update 0
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 5 changes to 5 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg log -r . -R updated
changeset: 0:8b6053c928fe
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: 1
$ rm -rf updated
incoming via HTTP
$ hg clone http://localhost:$HGPORT1/ --rev 0 partial
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd partial
$ touch LOCAL
$ hg ci -qAm LOCAL
$ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n'
comparing with http://localhost:$HGPORT1/
searching for changes
2
$ cd ..
pull
$ cd copy-pull
$ echo '[hooks]' >> .hg/hgrc
$ echo "changegroup = python \"$TESTDIR/printenv.py\" changegroup" >> .hg/hgrc
$ hg pull
pulling from http://localhost:$HGPORT1/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_URL=http://localhost:$HGPORT1/
(run 'hg update' to get a working copy)
$ cd ..
clone from invalid URL
$ hg clone http://localhost:$HGPORT/bad
abort: HTTP Error 404: Not Found
[255]
test http authentication
+ use the same server to test server side streaming preference
$ cd test
$ cat << EOT > userpass.py
> import base64
> from mercurial.hgweb import common
> def perform_authentication(hgweb, req, op):
> auth = req.env.get('HTTP_AUTHORIZATION')
> if not auth:
> raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who',
> [('WWW-Authenticate', 'Basic Realm="mercurial"')])
> if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']:
> raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no')
> def extsetup():
> common.permhooks.insert(0, perform_authentication)
> EOT
$ hg --config extensions.x=userpass.py serve -p $HGPORT2 -d --pid-file=pid \
> --config server.preferuncompressed=True \
> --config web.push_ssl=False --config web.allow_push=* -A ../access.log
$ cat pid >> $DAEMON_PIDS
$ cat << EOF > get_pass.py
> import getpass
> def newgetpass(arg):
> return "pass"
> getpass.getpass = newgetpass
> EOF
#if python243
$ hg id http://localhost:$HGPORT2/
abort: http authorization required for http://localhost:$HGPORT2/
[255]
$ hg id http://localhost:$HGPORT2/
abort: http authorization required for http://localhost:$HGPORT2/
[255]
$ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/
http authorization required for http://localhost:$HGPORT2/
realm: mercurial
user: user
password: 5fed3813f7f5
$ hg id http://user:pass@localhost:$HGPORT2/
5fed3813f7f5
#endif
$ echo '[auth]' >> .hg/hgrc
$ echo 'l.schemes=http' >> .hg/hgrc
$ echo 'l.prefix=lo' >> .hg/hgrc
$ echo 'l.username=user' >> .hg/hgrc
$ echo 'l.password=pass' >> .hg/hgrc
$ hg id http://localhost:$HGPORT2/
5fed3813f7f5
$ hg id http://localhost:$HGPORT2/
5fed3813f7f5
$ hg id http://user@localhost:$HGPORT2/
5fed3813f7f5
#if python243
$ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1
streaming all changes
7 files to transfer, 916 bytes of data
transferred * bytes in * seconds (*/sec) (glob)
updating to branch default
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg id http://user2@localhost:$HGPORT2/
abort: http authorization required for http://localhost:$HGPORT2/
[255]
$ hg id http://user:pass2@localhost:$HGPORT2/
abort: HTTP Error 403: no
[255]
$ hg -R dest tag -r tip top
$ hg -R dest push http://user:pass@localhost:$HGPORT2/
pushing to http://user:***@localhost:$HGPORT2/
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
$ hg rollback -q
$ cut -c38- ../access.log
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=branchmap HTTP/1.1" 200 -
"GET /?cmd=stream_out HTTP/1.1" 401 -
"GET /?cmd=stream_out HTTP/1.1" 200 -
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
"GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces
"GET /?cmd=capabilities HTTP/1.1" 200 -
"GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872
"GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=phases
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
"GET /?cmd=branchmap HTTP/1.1" 200 -
"GET /?cmd=branchmap HTTP/1.1" 200 -
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
"POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+5eb5abfefeea63c80dd7553bcc3783f37e0c5524
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
"GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
#endif
$ cd ..
clone of serve with repo in root and unserved subrepo (issue2970)
$ hg --cwd test init sub
$ echo empty > test/sub/empty
$ hg --cwd test/sub add empty
$ hg --cwd test/sub commit -qm 'add empty'
$ hg --cwd test/sub tag -r 0 something
$ echo sub = sub > test/.hgsub
$ hg --cwd test add .hgsub
$ hg --cwd test commit -qm 'add subrepo'
$ hg clone http://localhost:$HGPORT noslash-clone
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 7 changes to 7 files
updating to branch default
abort: HTTP Error 404: Not Found
[255]
$ hg clone http://localhost:$HGPORT/ slash-clone
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 7 changes to 7 files
updating to branch default
abort: HTTP Error 404: Not Found
[255]
check error log
$ cat error.log