largefiles: show progress when checking standin hashes in outgoing changesets
This checking can take a huge amount of time and we should give user a hint
that something is going on.
# Construct the following history tree:
#
# @ 5:e1bb631146ca b1
# |
# o 4:a4fdb3b883c4 0:b608b9236435 b1
# |
# | o 3:4b57d2520816 1:44592833ba9f
# | |
# | | o 2:063f31070f65
# | |/
# | o 1:44592833ba9f
# |/
# o 0:b608b9236435
$ mkdir b1
$ cd b1
$ hg init
$ echo foo > foo
$ echo zero > a
$ hg init sub
$ echo suba > sub/suba
$ hg --cwd sub ci -Am addsuba
adding suba
$ echo 'sub = sub' > .hgsub
$ hg ci -qAm0
$ echo one > a ; hg ci -m1
$ echo two > a ; hg ci -m2
$ hg up -q 1
$ echo three > a ; hg ci -qm3
$ hg up -q 0
$ hg branch -q b1
$ echo four > a ; hg ci -qm4
$ echo five > a ; hg ci -qm5
Initial repo state:
$ hg log -G --template '{rev}:{node|short} {parents} {branches}\n'
@ 5:ff252e8273df b1
|
o 4:d047485b3896 0:60829823a42a b1
|
| o 3:6efa171f091b 1:0786582aa4b1
| |
| | o 2:bd10386d478c
| |/
| o 1:0786582aa4b1
|/
o 0:60829823a42a
Make sure update doesn't assume b1 is a repository if invoked from outside:
$ cd ..
$ hg update b1
abort: no repository found in '$TESTTMP' (.hg not found)!
[255]
$ cd b1
Test helper functions:
$ revtest () {
> msg=$1
> dirtyflag=$2 # 'clean', 'dirty' or 'dirtysub'
> startrev=$3
> targetrev=$4
> opt=$5
> hg up -qC $startrev
> test $dirtyflag = dirty && echo dirty > foo
> test $dirtyflag = dirtysub && echo dirty > sub/suba
> hg up $opt $targetrev
> hg parent --template 'parent={rev}\n'
> hg stat -S
> }
$ norevtest () {
> msg=$1
> dirtyflag=$2 # 'clean', 'dirty' or 'dirtysub'
> startrev=$3
> opt=$4
> hg up -qC $startrev
> test $dirtyflag = dirty && echo dirty > foo
> test $dirtyflag = dirtysub && echo dirty > sub/suba
> hg up $opt
> hg parent --template 'parent={rev}\n'
> hg stat -S
> }
Test cases are documented in a table in the update function of merge.py.
Cases are run as shown in that table, row by row.
$ norevtest 'none clean linear' clean 4
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
parent=5
$ norevtest 'none clean same' clean 2
abort: not a linear update
(merge or update --check to force update)
parent=2
$ revtest 'none clean linear' clean 1 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
parent=2
$ revtest 'none clean same' clean 2 3
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
parent=3
$ revtest 'none clean cross' clean 3 4
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
parent=4
$ revtest 'none dirty linear' dirty 1 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
parent=2
M foo
$ revtest 'none dirtysub linear' dirtysub 1 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
parent=2
M sub/suba
$ revtest 'none dirty same' dirty 2 3
abort: uncommitted changes
(commit or update --clean to discard changes)
parent=2
M foo
$ revtest 'none dirtysub same' dirtysub 2 3
abort: uncommitted changes
(commit or update --clean to discard changes)
parent=2
M sub/suba
$ revtest 'none dirty cross' dirty 3 4
abort: uncommitted changes
(commit or update --clean to discard changes)
parent=3
M foo
$ norevtest 'none dirty cross' dirty 2
abort: uncommitted changes
(commit and merge, or update --clean to discard changes)
parent=2
M foo
$ revtest 'none dirtysub cross' dirtysub 3 4
abort: uncommitted changes
(commit or update --clean to discard changes)
parent=3
M sub/suba
$ revtest '-C dirty linear' dirty 1 2 -C
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
parent=2
$ revtest '-c dirty linear' dirty 1 2 -c
abort: uncommitted changes
parent=1
M foo
$ revtest '-c dirtysub linear' dirtysub 1 2 -c
abort: uncommitted changes
parent=1
M sub/suba
$ norevtest '-c clean same' clean 2 -c
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
parent=3
$ revtest '-cC dirty linear' dirty 1 2 -cC
abort: cannot specify both -c/--check and -C/--clean
parent=1
M foo
Test obsolescence behavior
---------------------------------------------------------------------
successors should be taken in account when checking head destination
$ cat << EOF >> $HGRCPATH
> [ui]
> logtemplate={rev}:{node|short} {desc|firstline}
> [experimental]
> evolution=createmarkers
> EOF
Test no-argument update to a successor of an obsoleted changeset
$ hg log -G
o 5:ff252e8273df 5
|
o 4:d047485b3896 4
|
| o 3:6efa171f091b 3
| |
| | o 2:bd10386d478c 2
| |/
| @ 1:0786582aa4b1 1
|/
o 0:60829823a42a 0
$ hg book bm -r 3
$ hg status
M foo
We add simple obsolescence marker between 3 and 4 (indirect successors)
$ hg id --debug -i -r 3
6efa171f091b00a3c35edc15d48c52a498929953
$ hg id --debug -i -r 4
d047485b3896813b2a624e86201983520f003206
$ hg debugobsolete 6efa171f091b00a3c35edc15d48c52a498929953 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
$ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa d047485b3896813b2a624e86201983520f003206
Test that 5 is detected as a valid destination from 3 and also accepts moving
the bookmark (issue4015)
$ hg up --quiet --hidden 3
$ hg up 5
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg book bm
moving bookmark 'bm' forward from 6efa171f091b
$ hg bookmarks
* bm 5:ff252e8273df
Test that 4 is detected as the no-argument destination from 3 and also moves
the bookmark with it
$ hg up --quiet 0 # we should be able to update to 3 directly
$ hg up --quiet --hidden 3 # but not implemented yet.
$ hg book -f bm
$ hg up
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
updating bookmark bm
$ hg book
* bm 4:d047485b3896
Test that 5 is detected as a valid destination from 1
$ hg up --quiet 0 # we should be able to update to 3 directly
$ hg up --quiet --hidden 3 # but not implemented yet.
$ hg up 5
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Test that 5 is not detected as a valid destination from 2
$ hg up --quiet 0
$ hg up --quiet 2
$ hg up 5
abort: uncommitted changes
(commit or update --clean to discard changes)
[255]
Test that we don't crash when updating from a pruned changeset (i.e. has no
successors). Behavior should probably be that we update to the first
non-obsolete parent but that will be decided later.
$ hg id --debug -r 2
bd10386d478cd5a9faf2e604114c8e6da62d3889
$ hg up --quiet 0
$ hg up --quiet 2
$ hg debugobsolete bd10386d478cd5a9faf2e604114c8e6da62d3889
$ hg up
0 files updated, 0 files merged, 0 files removed, 0 files unresolved