Mercurial > hg
view tests/test-mq-merge.t @ 36820:f33a87cf60cc
xdiff: add a preprocessing step that trims files
xdiff has a `xdl_trim_ends` step that removes common lines, unmatchable
lines. That is in theory good, but happens too late - after splitting,
hashing, and adjusting the hash values so they are unique. Those splitting,
hashing and adjusting hash values steps could have noticeable overhead.
Diffing two large files with minor (one-line-ish) changes are not uncommon.
In that case, the raw performance of those preparation steps seriously
matter. Even allocating an O(N) array and storing line offsets to it is
expensive. Therefore my previous attempts [1] [2] cannot be good enough
since they do not remove the O(N) array assignment.
This patch adds a preprocessing step - `xdl_trim_files` that runs before
other preprocessing steps. It counts common prefix and suffix and lines in
them (needed for displaying line number), without doing anything else.
Testing with a crafted large (169MB) file, with minor change:
```
open('a','w').write(''.join('%s\n' % (i % 100000) for i in xrange(30000000) if i != 6000000))
open('b','w').write(''.join('%s\n' % (i % 100000) for i in xrange(30000000) if i != 6003000))
```
Running xdiff by a simple binary [3], this patch improves the xdiff perf by
more than 10x for the above case:
```
# xdiff before this patch
2.41s user 1.13s system 98% cpu 3.592 total
# xdiff after this patch
0.14s user 0.16s system 98% cpu 0.309 total
# gnu diffutils
0.12s user 0.15s system 98% cpu 0.272 total
# (best of 20 runs)
```
It's still slightly slower than GNU diffutils. But it's pretty close now.
Testing with real repo data:
For the whole repo, this patch makes xdiff 25% faster:
```
# hg perfbdiff --count 100 --alldata -c d334afc585e2 --blocks [--xdiff]
# xdiff, after
! wall 0.058861 comb 0.050000 user 0.050000 sys 0.000000 (best of 100)
# xdiff, before
! wall 0.077816 comb 0.080000 user 0.080000 sys 0.000000 (best of 91)
# bdiff
! wall 0.117473 comb 0.120000 user 0.120000 sys 0.000000 (best of 67)
```
For files that are long (ex. commands.py), the speedup is more than 3x, very
significant:
```
# hg perfbdiff --count 3000 --blocks commands.py.i 1 [--xdiff]
# xdiff, after
! wall 0.690583 comb 0.690000 user 0.690000 sys 0.000000 (best of 12)
# xdiff, before
! wall 2.240361 comb 2.210000 user 2.210000 sys 0.000000 (best of 4)
# bdiff
! wall 2.469852 comb 2.440000 user 2.440000 sys 0.000000 (best of 4)
```
[1]: https://phab.mercurial-scm.org/D2631
[2]: https://phab.mercurial-scm.org/D2634
[3]:
```
// Code to run xdiff from command line. No proper error handling.
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include "mercurial/thirdparty/xdiff/xdiff.h"
#define ensure(x) if (!(x)) exit(255);
mmfile_t readfile(const char *path) {
struct stat st; int fd = open(path, O_RDONLY);
fstat(fd, &st); mmfile_t file = { malloc(st.st_size), st.st_size };
ensure(read(fd, file.ptr, st.st_size) == st.st_size); close(fd);
return file;
}
int main(int argc, char const *argv[]) {
mmfile_t a = readfile(argv[1]), b = readfile(argv[2]);
xpparam_t xpp = {0}; xdemitconf_t xecfg = {0}; xdemitcb_t ecb = {0};
xdl_diff(&a, &b, &xpp, &xecfg, &ecb);
return 0;
}
```
Differential Revision: https://phab.mercurial-scm.org/D2686
author | Jun Wu <quark@fb.com> |
---|---|
date | Wed, 07 Mar 2018 14:45:31 -0800 |
parents | 4441705b7111 |
children | 4152183acedd |
line wrap: on
line source
Setup extension: $ cat <<EOF >> $HGRCPATH > [extensions] > mq = > [mq] > git = keep > EOF Test merge with mq changeset as the second parent: $ hg init m $ cd m $ touch a b c $ hg add a $ hg commit -m a $ hg add b $ hg qnew -d "0 0" b $ hg update 0 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ hg add c $ hg commit -m c created new head $ hg merge 1 files updated, 0 files merged, 0 files removed, 0 files unresolved (branch merge, don't forget to commit) $ hg commit -m merge abort: cannot commit over an applied mq patch [255] $ cd .. Issue529: mq aborts when merging patch deleting files $ checkundo() > { > if [ -f .hg/store/undo ]; then > echo ".hg/store/undo still exists" > fi > } Commit two dummy files in "init" changeset: $ hg init t $ cd t $ echo a > a $ echo b > b $ hg ci -Am init adding a adding b $ hg tag -l init Create a patch removing a: $ hg qnew rm_a $ hg rm a $ hg qrefresh -m "rm a" Save the patch queue so we can merge it later: $ hg qsave -c -e copy $TESTTMP/t/.hg/patches to $TESTTMP/t/.hg/patches.1 $ checkundo Update b and commit in an "update" changeset: $ hg up -C init 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b >> b $ hg st M b $ hg ci -m update created new head # Here, qpush used to abort with : # The system cannot find the file specified => a $ hg manifest a b $ hg qpush -a -m merging with queue at: $TESTTMP/t/.hg/patches.1 applying rm_a now at: rm_a $ checkundo $ hg manifest b Ensure status is correct after merge: $ hg qpop -a popping rm_a popping .hg.patches.merge.marker patch queue now empty $ cd .. Classic MQ merge sequence *with an explicit named queue*: $ hg init t2 $ cd t2 $ echo '[diff]' > .hg/hgrc $ echo 'nodates = 1' >> .hg/hgrc $ echo a > a $ hg ci -Am init adding a $ echo b > a $ hg ci -m changea $ hg up -C 0 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg cp a aa $ echo c >> a $ hg qnew --git -f -e patcha $ echo d >> a $ hg qnew -d '0 0' -f -e patcha2 Create the reference queue: $ hg qsave -c -e -n refqueue copy $TESTTMP/t2/.hg/patches to $TESTTMP/t2/.hg/refqueue $ hg up -C 1 1 files updated, 0 files merged, 1 files removed, 0 files unresolved Merge: $ HGMERGE=internal:other hg qpush -a -m -n refqueue merging with queue at: $TESTTMP/t2/.hg/refqueue applying patcha patching file a Hunk #1 succeeded at 2 with fuzz 1 (offset 0 lines). fuzz found when applying patch, stopping patch didn't work out, merging patcha 1 files updated, 0 files merged, 1 files removed, 0 files unresolved 0 files updated, 2 files merged, 0 files removed, 0 files unresolved (branch merge, don't forget to commit) applying patcha2 now at: patcha2 Check patcha is still a git patch: $ cat .hg/patches/patcha # HG changeset patch # Parent d3873e73d99ef67873dac33fbcc66268d5d2b6f4 diff --git a/a b/a --- a/a +++ b/a @@ -1,1 +1,2 @@ -b +a +c diff --git a/a b/aa copy from a copy to aa --- a/a +++ b/aa @@ -1,1 +1,1 @@ -b +a Check patcha2 is still a regular patch: $ cat .hg/patches/patcha2 # HG changeset patch # Date 0 0 # Parent ???????????????????????????????????????? (glob) diff -r ???????????? -r ???????????? a (glob) --- a/a +++ b/a @@ -1,2 +1,3 @@ a c +d $ cd ..