view hgext/blackbox.py @ 33453:f6b7617a85bb

phases: add a 'registernew' method to set new phases

This new function will be used by code that adds new changesets. It ajusts the
phase boundary to make sure added changesets are at least in their target
phase (they end up in an higher phase if their parents are in a higher phase).

Having a dedicated function also simplify the phases tracking. All the new
nodes are passed as argument, so we know that all of them needs to have their
new phase registered. We also know that no other nodes will be affected, so no
extra computation are needed.

This function differ from 'retractboundary' where some nodes might change
phase while some other might not. It can also affect nodes not passed as
parameters.

These simplification also apply to the computation itself. For now we use
'_retractboundary' there by convenience, but we may introduces simpler code
later.

While registering new revisions, we still need to check the actual phases of
the added node because it might be higher than the target phase (eg: target is
draft but parent is secret).

We will migrate users over the next changesets.

# blackbox.py - log repository events to a file for post-mortem debugging
#
# Copyright 2010 Nicolas Dumazet
# Copyright 2013 Facebook, Inc.
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

"""log repository events to a blackbox for debugging

Logs event information to .hg/blackbox.log to help debug and diagnose problems.
The events that get logged can be configured via the blackbox.track config key.

Examples::

  [blackbox]
  track = *
  # dirty is *EXPENSIVE* (slow);
  # each log entry indicates `+` if the repository is dirty, like :hg:`id`.
  dirty = True
  # record the source of log messages
  logsource = True

  [blackbox]
  track = command, commandfinish, commandexception, exthook, pythonhook

  [blackbox]
  track = incoming

  [blackbox]
  # limit the size of a log file
  maxsize = 1.5 MB
  # rotate up to N log files when the current one gets too big
  maxfiles = 3

"""

from __future__ import absolute_import

import errno
import re

from mercurial.i18n import _
from mercurial.node import hex

from mercurial import (
    registrar,
    ui as uimod,
    util,
)

# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

cmdtable = {}
command = registrar.command(cmdtable)

configtable = {}
configitem = registrar.configitem(configtable)

configitem('blackbox', 'dirty',
    default=False,
)
configitem('blackbox', 'maxsize',
    default='1 MB',
)
configitem('blackbox', 'logsource',
    default=False,
)

lastui = None

filehandles = {}

def _openlog(vfs):
    path = vfs.join('blackbox.log')
    if path in filehandles:
        return filehandles[path]
    filehandles[path] = fp = vfs('blackbox.log', 'a')
    return fp

def _closelog(vfs):
    path = vfs.join('blackbox.log')
    fp = filehandles[path]
    del filehandles[path]
    fp.close()

def wrapui(ui):
    class blackboxui(ui.__class__):
        def __init__(self, src=None):
            super(blackboxui, self).__init__(src)
            if src is None:
                self._partialinit()
            else:
                self._bbfp = getattr(src, '_bbfp', None)
                self._bbinlog = False
                self._bbrepo = getattr(src, '_bbrepo', None)
                self._bbvfs = getattr(src, '_bbvfs', None)

        def _partialinit(self):
            if util.safehasattr(self, '_bbvfs'):
                return
            self._bbfp = None
            self._bbinlog = False
            self._bbrepo = None
            self._bbvfs = None

        def copy(self):
            self._partialinit()
            return self.__class__(self)

        @util.propertycache
        def track(self):
            return self.configlist('blackbox', 'track', ['*'])

        def _openlogfile(self):
            def rotate(oldpath, newpath):
                try:
                    self._bbvfs.unlink(newpath)
                except OSError as err:
                    if err.errno != errno.ENOENT:
                        self.debug("warning: cannot remove '%s': %s\n" %
                                   (newpath, err.strerror))
                try:
                    if newpath:
                        self._bbvfs.rename(oldpath, newpath)
                except OSError as err:
                    if err.errno != errno.ENOENT:
                        self.debug("warning: cannot rename '%s' to '%s': %s\n" %
                                   (newpath, oldpath, err.strerror))

            fp = _openlog(self._bbvfs)
            maxsize = self.configbytes('blackbox', 'maxsize')
            if maxsize > 0:
                st = self._bbvfs.fstat(fp)
                if st.st_size >= maxsize:
                    path = fp.name
                    _closelog(self._bbvfs)
                    maxfiles = self.configint('blackbox', 'maxfiles', 7)
                    for i in xrange(maxfiles - 1, 1, -1):
                        rotate(oldpath='%s.%d' % (path, i - 1),
                               newpath='%s.%d' % (path, i))
                    rotate(oldpath=path,
                           newpath=maxfiles > 0 and path + '.1')
                    fp = _openlog(self._bbvfs)
            return fp

        def _bbwrite(self, fmt, *args):
            self._bbfp.write(fmt % args)
            self._bbfp.flush()

        def log(self, event, *msg, **opts):
            global lastui
            super(blackboxui, self).log(event, *msg, **opts)
            self._partialinit()

            if not '*' in self.track and not event in self.track:
                return

            if self._bbfp:
                ui = self
            elif self._bbvfs:
                try:
                    self._bbfp = self._openlogfile()
                except (IOError, OSError) as err:
                    self.debug('warning: cannot write to blackbox.log: %s\n' %
                               err.strerror)
                    del self._bbvfs
                    self._bbfp = None
                ui = self
            else:
                # certain ui instances exist outside the context of
                # a repo, so just default to the last blackbox that
                # was seen.
                ui = lastui

            if not ui or not ui._bbfp:
                return
            if not lastui or ui._bbrepo:
                lastui = ui
            if ui._bbinlog:
                # recursion guard
                return
            try:
                ui._bbinlog = True
                default = self.configdate('devel', 'default-date')
                date = util.datestr(default, '%Y/%m/%d %H:%M:%S')
                user = util.getuser()
                pid = '%d' % util.getpid()
                formattedmsg = msg[0] % msg[1:]
                rev = '(unknown)'
                changed = ''
                if ui._bbrepo:
                    ctx = ui._bbrepo[None]
                    parents = ctx.parents()
                    rev = ('+'.join([hex(p.node()) for p in parents]))
                    if (ui.configbool('blackbox', 'dirty') and
                        ctx.dirty(missing=True, merge=False, branch=False)):
                        changed = '+'
                if ui.configbool('blackbox', 'logsource'):
                    src = ' [%s]' % event
                else:
                    src = ''
                try:
                    ui._bbwrite('%s %s @%s%s (%s)%s> %s',
                        date, user, rev, changed, pid, src, formattedmsg)
                except IOError as err:
                    self.debug('warning: cannot write to blackbox.log: %s\n' %
                               err.strerror)
            finally:
                ui._bbinlog = False

        def setrepo(self, repo):
            self._bbfp = None
            self._bbinlog = False
            self._bbrepo = repo
            self._bbvfs = repo.vfs

    ui.__class__ = blackboxui
    uimod.ui = blackboxui

def uisetup(ui):
    wrapui(ui)

def reposetup(ui, repo):
    # During 'hg pull' a httppeer repo is created to represent the remote repo.
    # It doesn't have a .hg directory to put a blackbox in, so we don't do
    # the blackbox setup for it.
    if not repo.local():
        return

    if util.safehasattr(ui, 'setrepo'):
        ui.setrepo(repo)
    repo._wlockfreeprefix.add('blackbox.log')

@command('^blackbox',
    [('l', 'limit', 10, _('the number of events to show')),
    ],
    _('hg blackbox [OPTION]...'))
def blackbox(ui, repo, *revs, **opts):
    '''view the recent repository events
    '''

    if not repo.vfs.exists('blackbox.log'):
        return

    limit = opts.get('limit')
    fp = repo.vfs('blackbox.log', 'r')
    lines = fp.read().split('\n')

    count = 0
    output = []
    for line in reversed(lines):
        if count >= limit:
            break

        # count the commands by matching lines like: 2013/01/23 19:13:36 root>
        if re.match('^\d{4}/\d{2}/\d{2} \d{2}:\d{2}:\d{2} .*> .*', line):
            count += 1
        output.append(line)

    ui.status('\n'.join(reversed(output)))