view tests/test-export.t @ 33453:f6b7617a85bb

phases: add a 'registernew' method to set new phases

This new function will be used by code that adds new changesets. It ajusts the
phase boundary to make sure added changesets are at least in their target
phase (they end up in an higher phase if their parents are in a higher phase).

Having a dedicated function also simplify the phases tracking. All the new
nodes are passed as argument, so we know that all of them needs to have their
new phase registered. We also know that no other nodes will be affected, so no
extra computation are needed.

This function differ from 'retractboundary' where some nodes might change
phase while some other might not. It can also affect nodes not passed as
parameters.

These simplification also apply to the computation itself. For now we use
'_retractboundary' there by convenience, but we may introduces simpler code
later.

While registering new revisions, we still need to check the actual phases of
the added node because it might be higher than the target phase (eg: target is
draft but parent is secret).

We will migrate users over the next changesets.

  $ hg init repo
  $ cd repo
  $ touch foo
  $ hg add foo
  $ for i in 0 1 2 3 4 5 6 7 8 9 10 11; do
  >    echo "foo-$i" >> foo
  >    hg ci -m "foo-$i"
  > done

  $ for out in "%nof%N" "%%%H" "%b-%R" "%h" "%r" "%m"; do
  >    echo
  >    echo "# foo-$out.patch"
  >    hg export -v -o "foo-$out.patch" 2:tip
  > done
  
  # foo-%nof%N.patch
  exporting patches:
  foo-01of10.patch
  foo-02of10.patch
  foo-03of10.patch
  foo-04of10.patch
  foo-05of10.patch
  foo-06of10.patch
  foo-07of10.patch
  foo-08of10.patch
  foo-09of10.patch
  foo-10of10.patch
  
  # foo-%%%H.patch
  exporting patches:
  foo-%617188a1c80f869a7b66c85134da88a6fb145f67.patch
  foo-%dd41a5ff707a5225204105611ba49cc5c229d55f.patch
  foo-%f95a5410f8664b6e1490a4af654e4b7d41a7b321.patch
  foo-%4346bcfde53b4d9042489078bcfa9c3e28201db2.patch
  foo-%afda8c3a009cc99449a05ad8aa4655648c4ecd34.patch
  foo-%35284ce2b6b99c9d2ac66268fe99e68e1974e1aa.patch
  foo-%9688c41894e6931305fa7165a37f6568050b4e9b.patch
  foo-%747d3c68f8ec44bb35816bfcd59aeb50b9654c2f.patch
  foo-%5f17a83f5fbd9414006a5e563eab4c8a00729efd.patch
  foo-%f3acbafac161ec68f1598af38f794f28847ca5d3.patch
  
  # foo-%b-%R.patch
  exporting patches:
  foo-repo-2.patch
  foo-repo-3.patch
  foo-repo-4.patch
  foo-repo-5.patch
  foo-repo-6.patch
  foo-repo-7.patch
  foo-repo-8.patch
  foo-repo-9.patch
  foo-repo-10.patch
  foo-repo-11.patch
  
  # foo-%h.patch
  exporting patches:
  foo-617188a1c80f.patch
  foo-dd41a5ff707a.patch
  foo-f95a5410f866.patch
  foo-4346bcfde53b.patch
  foo-afda8c3a009c.patch
  foo-35284ce2b6b9.patch
  foo-9688c41894e6.patch
  foo-747d3c68f8ec.patch
  foo-5f17a83f5fbd.patch
  foo-f3acbafac161.patch
  
  # foo-%r.patch
  exporting patches:
  foo-02.patch
  foo-03.patch
  foo-04.patch
  foo-05.patch
  foo-06.patch
  foo-07.patch
  foo-08.patch
  foo-09.patch
  foo-10.patch
  foo-11.patch
  
  # foo-%m.patch
  exporting patches:
  foo-foo_2.patch
  foo-foo_3.patch
  foo-foo_4.patch
  foo-foo_5.patch
  foo-foo_6.patch
  foo-foo_7.patch
  foo-foo_8.patch
  foo-foo_9.patch
  foo-foo_10.patch
  foo-foo_11.patch

Doing it again clobbers the files rather than appending:
  $ hg export -v -o "foo-%m.patch" 2:3
  exporting patches:
  foo-foo_2.patch
  foo-foo_3.patch
  $ grep HG foo-foo_2.patch | wc -l
  \s*1 (re)
  $ grep HG foo-foo_3.patch | wc -l
  \s*1 (re)

Exporting 4 changesets to a file:

  $ hg export -o export_internal 1 2 3 4
  $ grep HG export_internal | wc -l
  \s*4 (re)

Doing it again clobbers the file rather than appending:
  $ hg export -o export_internal 1 2 3 4
  $ grep HG export_internal | wc -l
  \s*4 (re)

Exporting 4 changesets to stdout:

  $ hg export 1 2 3 4 | grep HG | wc -l
  \s*4 (re)

Exporting revision -2 to a file:

  $ hg export -- -2
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID 5f17a83f5fbd9414006a5e563eab4c8a00729efd
  # Parent  747d3c68f8ec44bb35816bfcd59aeb50b9654c2f
  foo-10
  
  diff -r 747d3c68f8ec -r 5f17a83f5fbd foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -8,3 +8,4 @@
   foo-7
   foo-8
   foo-9
  +foo-10

Exporting wdir revision:

  $ echo "foo-wdir" >> foo
  $ hg export 'wdir()'
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID ffffffffffffffffffffffffffffffffffffffff
  # Parent  f3acbafac161ec68f1598af38f794f28847ca5d3
  
  
  diff -r f3acbafac161 foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -10,3 +10,4 @@
   foo-9
   foo-10
   foo-11
  +foo-wdir
  $ hg revert -q foo

No filename should be printed if stdout is specified explicitly:

  $ hg export -v 1 -o -
  exporting patch:
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID d1c9656e973cfb5aebd5499bbd2cb350e3b12266
  # Parent  871558de6af2e8c244222f8eea69b782c94ce3df
  foo-1
  
  diff -r 871558de6af2 -r d1c9656e973c foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,1 +1,2 @@
   foo-0
  +foo-1

Checking if only alphanumeric characters are used in the file name (%m option):

  $ echo "line" >> foo
  $ hg commit -m " !\"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]"'^'"_\`abcdefghijklmnopqrstuvwxyz{|}~"
  $ hg export -v -o %m.patch tip
  exporting patch:
  ____________0123456789_______ABCDEFGHIJKLMNOPQRSTUVWXYZ______abcdefghijklmnopqrstuvwxyz____.patch

Catch exporting unknown revisions (especially empty revsets, see issue3353)

  $ hg export
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID 197ecd81a57f760b54f34a58817ad5b04991fa47
  # Parent  f3acbafac161ec68f1598af38f794f28847ca5d3
   !"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
  
  diff -r f3acbafac161 -r 197ecd81a57f foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -10,3 +10,4 @@
   foo-9
   foo-10
   foo-11
  +line

  $ hg export ""
  hg: parse error: empty query
  [255]
  $ hg export 999
  abort: unknown revision '999'!
  [255]
  $ hg export "not all()"
  abort: export requires at least one changeset
  [255]

Check for color output
  $ cat <<EOF >> $HGRCPATH
  > [color]
  > mode = ansi
  > [extensions]
  > color =
  > EOF

  $ hg export --color always --nodates tip
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID * (glob)
  # Parent * (glob)
   !"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
  
  \x1b[0;1mdiff -r f3acbafac161 -r 197ecd81a57f foo\x1b[0m (esc)
  \x1b[0;31;1m--- a/foo\x1b[0m (esc)
  \x1b[0;32;1m+++ b/foo\x1b[0m (esc)
  \x1b[0;35m@@ -10,3 +10,4 @@\x1b[0m (esc)
   foo-9
   foo-10
   foo-11
  \x1b[0;32m+line\x1b[0m (esc)


  $ cd ..