view tests/test-hardlinks.t @ 33453:f6b7617a85bb

phases: add a 'registernew' method to set new phases

This new function will be used by code that adds new changesets. It ajusts the
phase boundary to make sure added changesets are at least in their target
phase (they end up in an higher phase if their parents are in a higher phase).

Having a dedicated function also simplify the phases tracking. All the new
nodes are passed as argument, so we know that all of them needs to have their
new phase registered. We also know that no other nodes will be affected, so no
extra computation are needed.

This function differ from 'retractboundary' where some nodes might change
phase while some other might not. It can also affect nodes not passed as
parameters.

These simplification also apply to the computation itself. For now we use
'_retractboundary' there by convenience, but we may introduces simpler code
later.

While registering new revisions, we still need to check the actual phases of
the added node because it might be higher than the target phase (eg: target is
draft but parent is secret).

We will migrate users over the next changesets.

#require hardlink

  $ cat > nlinks.py <<EOF
  > import sys
  > from mercurial import util
  > for f in sorted(sys.stdin.readlines()):
  >     f = f[:-1]
  >     print util.nlinks(f), f
  > EOF

  $ nlinksdir()
  > {
  >     find "$@" -type f | $PYTHON $TESTTMP/nlinks.py
  > }

Some implementations of cp can't create hardlinks (replaces 'cp -al' on Linux):

  $ cat > linkcp.py <<EOF
  > from mercurial import util
  > import sys
  > util.copyfiles(sys.argv[1], sys.argv[2], hardlink=True)
  > EOF

  $ linkcp()
  > {
  >     $PYTHON $TESTTMP/linkcp.py $1 $2
  > }

Prepare repo r1:

  $ hg init r1
  $ cd r1

  $ echo c1 > f1
  $ hg add f1
  $ hg ci -m0

  $ mkdir d1
  $ cd d1
  $ echo c2 > f2
  $ hg add f2
  $ hg ci -m1
  $ cd ../..

  $ nlinksdir r1/.hg/store
  1 r1/.hg/store/00changelog.i
  1 r1/.hg/store/00manifest.i
  1 r1/.hg/store/data/d1/f2.i
  1 r1/.hg/store/data/f1.i
  1 r1/.hg/store/fncache
  1 r1/.hg/store/phaseroots
  1 r1/.hg/store/undo
  1 r1/.hg/store/undo.backup.fncache
  1 r1/.hg/store/undo.backupfiles
  1 r1/.hg/store/undo.phaseroots


Create hardlinked clone r2:

  $ hg clone -U --debug r1 r2 --config progress.debug=true
  linking: 1
  linking: 2
  linking: 3
  linking: 4
  linking: 5
  linking: 6
  linking: 7
  linked 7 files

Create non-hardlinked clone r3:

  $ hg clone --pull r1 r3
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved


Repos r1 and r2 should now contain hardlinked files:

  $ nlinksdir r1/.hg/store
  2 r1/.hg/store/00changelog.i
  2 r1/.hg/store/00manifest.i
  2 r1/.hg/store/data/d1/f2.i
  2 r1/.hg/store/data/f1.i
  2 r1/.hg/store/fncache
  1 r1/.hg/store/phaseroots
  1 r1/.hg/store/undo
  1 r1/.hg/store/undo.backup.fncache
  1 r1/.hg/store/undo.backupfiles
  1 r1/.hg/store/undo.phaseroots

  $ nlinksdir r2/.hg/store
  2 r2/.hg/store/00changelog.i
  2 r2/.hg/store/00manifest.i
  2 r2/.hg/store/data/d1/f2.i
  2 r2/.hg/store/data/f1.i
  2 r2/.hg/store/fncache

Repo r3 should not be hardlinked:

  $ nlinksdir r3/.hg/store
  1 r3/.hg/store/00changelog.i
  1 r3/.hg/store/00manifest.i
  1 r3/.hg/store/data/d1/f2.i
  1 r3/.hg/store/data/f1.i
  1 r3/.hg/store/fncache
  1 r3/.hg/store/phaseroots
  1 r3/.hg/store/undo
  1 r3/.hg/store/undo.backupfiles
  1 r3/.hg/store/undo.phaseroots


Create a non-inlined filelog in r3:

  $ cd r3/d1
  >>> f = open('data1', 'wb')
  >>> for x in range(10000):
  ...     f.write("%s\n" % str(x))
  >>> f.close()
  $ for j in 0 1 2 3 4 5 6 7 8 9; do
  >   cat data1 >> f2
  >   hg commit -m$j
  > done
  $ cd ../..

  $ nlinksdir r3/.hg/store
  1 r3/.hg/store/00changelog.i
  1 r3/.hg/store/00manifest.i
  1 r3/.hg/store/data/d1/f2.d
  1 r3/.hg/store/data/d1/f2.i
  1 r3/.hg/store/data/f1.i
  1 r3/.hg/store/fncache
  1 r3/.hg/store/phaseroots
  1 r3/.hg/store/undo
  1 r3/.hg/store/undo.backup.fncache
  1 r3/.hg/store/undo.backup.phaseroots
  1 r3/.hg/store/undo.backupfiles
  1 r3/.hg/store/undo.phaseroots

Push to repo r1 should break up most hardlinks in r2:

  $ hg -R r2 verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions

  $ cd r3
  $ hg push
  pushing to $TESTTMP/r1 (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 10 changesets with 10 changes to 1 files

  $ cd ..

  $ nlinksdir r2/.hg/store
  1 r2/.hg/store/00changelog.i
  1 r2/.hg/store/00manifest.i
  1 r2/.hg/store/data/d1/f2.i
  2 r2/.hg/store/data/f1.i
  [12] r2/\.hg/store/fncache (re)

#if hardlink-whitelisted
  $ nlinksdir r2/.hg/store/fncache
  2 r2/.hg/store/fncache
#endif

  $ hg -R r2 verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions


  $ cd r1
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Committing a change to f1 in r1 must break up hardlink f1.i in r2:

  $ echo c1c1 >> f1
  $ hg ci -m00
  $ cd ..

  $ nlinksdir r2/.hg/store
  1 r2/.hg/store/00changelog.i
  1 r2/.hg/store/00manifest.i
  1 r2/.hg/store/data/d1/f2.i
  1 r2/.hg/store/data/f1.i
  [12] r2/\.hg/store/fncache (re)

#if hardlink-whitelisted
  $ nlinksdir r2/.hg/store/fncache
  2 r2/.hg/store/fncache
#endif

Create a file which exec permissions we will change
  $ cd r3
  $ echo "echo hello world" > f3
  $ hg add f3
  $ hg ci -mf3
  $ cd ..

  $ cd r3
  $ hg tip --template '{rev}:{node|short}\n'
  12:d3b77733a28a
  $ echo bla > f1
  $ chmod +x f3
  $ hg ci -m1
  $ cd ..

Create hardlinked copy r4 of r3 (on Linux, we would call 'cp -al'):

  $ linkcp r3 r4

'checklink' is produced by hardlinking a symlink, which is undefined whether
the symlink should be followed or not. It does behave differently on Linux and
BSD. Just remove it so the test pass on both platforms.

  $ rm -f r4/.hg/cache/checklink

r4 has hardlinks in the working dir (not just inside .hg):

  $ nlinksdir r4
  2 r4/.hg/00changelog.i
  2 r4/.hg/branch
  2 r4/.hg/cache/branch2-base
  2 r4/.hg/cache/branch2-served
  2 r4/.hg/cache/checkisexec (execbit !)
  ? r4/.hg/cache/checklink-target (glob) (symlink !)
  2 r4/.hg/cache/checknoexec (execbit !)
  2 r4/.hg/cache/rbc-names-v1
  2 r4/.hg/cache/rbc-revs-v1
  2 r4/.hg/dirstate
  2 r4/.hg/fsmonitor.state (fsmonitor !)
  2 r4/.hg/hgrc
  2 r4/.hg/last-message.txt
  2 r4/.hg/requires
  2 r4/.hg/store/00changelog.i
  2 r4/.hg/store/00manifest.i
  2 r4/.hg/store/data/d1/f2.d
  2 r4/.hg/store/data/d1/f2.i
  2 r4/.hg/store/data/f1.i
  2 r4/.hg/store/data/f3.i
  2 r4/.hg/store/fncache
  2 r4/.hg/store/phaseroots
  2 r4/.hg/store/undo
  2 r4/.hg/store/undo.backup.fncache
  2 r4/.hg/store/undo.backup.phaseroots
  2 r4/.hg/store/undo.backupfiles
  2 r4/.hg/store/undo.phaseroots
  [24] r4/\.hg/undo\.backup\.dirstate (re)
  2 r4/.hg/undo.bookmarks
  2 r4/.hg/undo.branch
  2 r4/.hg/undo.desc
  [24] r4/\.hg/undo\.dirstate (re)
  2 r4/d1/data1
  2 r4/d1/f2
  2 r4/f1
  2 r4/f3

Update back to revision 12 in r4 should break hardlink of file f1 and f3:
#if hardlink-whitelisted
  $ nlinksdir r4/.hg/undo.backup.dirstate r4/.hg/undo.dirstate
  4 r4/.hg/undo.backup.dirstate
  4 r4/.hg/undo.dirstate
#endif


  $ hg -R r4 up 12
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved (execbit !)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved (no-execbit !)

  $ nlinksdir r4
  2 r4/.hg/00changelog.i
  1 r4/.hg/branch
  2 r4/.hg/cache/branch2-base
  2 r4/.hg/cache/branch2-served
  2 r4/.hg/cache/checkisexec (execbit !)
  2 r4/.hg/cache/checklink-target (symlink !)
  2 r4/.hg/cache/checknoexec (execbit !)
  2 r4/.hg/cache/rbc-names-v1
  2 r4/.hg/cache/rbc-revs-v1
  1 r4/.hg/dirstate
  1 r4/.hg/fsmonitor.state (fsmonitor !)
  2 r4/.hg/hgrc
  2 r4/.hg/last-message.txt
  2 r4/.hg/requires
  2 r4/.hg/store/00changelog.i
  2 r4/.hg/store/00manifest.i
  2 r4/.hg/store/data/d1/f2.d
  2 r4/.hg/store/data/d1/f2.i
  2 r4/.hg/store/data/f1.i
  2 r4/.hg/store/data/f3.i
  2 r4/.hg/store/fncache
  2 r4/.hg/store/phaseroots
  2 r4/.hg/store/undo
  2 r4/.hg/store/undo.backup.fncache
  2 r4/.hg/store/undo.backup.phaseroots
  2 r4/.hg/store/undo.backupfiles
  2 r4/.hg/store/undo.phaseroots
  [24] r4/\.hg/undo\.backup\.dirstate (re)
  2 r4/.hg/undo.bookmarks
  2 r4/.hg/undo.branch
  2 r4/.hg/undo.desc
  [24] r4/\.hg/undo\.dirstate (re)
  2 r4/d1/data1
  2 r4/d1/f2
  1 r4/f1
  1 r4/f3 (execbit !)
  2 r4/f3 (no-execbit !)

#if hardlink-whitelisted
  $ nlinksdir r4/.hg/undo.backup.dirstate r4/.hg/undo.dirstate
  4 r4/.hg/undo.backup.dirstate
  4 r4/.hg/undo.dirstate
#endif

Test hardlinking outside hg:

  $ mkdir x
  $ echo foo > x/a

  $ linkcp x y
  $ echo bar >> y/a

No diff if hardlink:

  $ diff x/a y/a

Test mq hardlinking:

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH

  $ hg init a
  $ cd a

  $ hg qimport -n foo - << EOF
  > # HG changeset patch
  > # Date 1 0
  > diff -r 2588a8b53d66 a
  > --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  > +++ b/a	Wed Jul 23 15:54:29 2008 +0200
  > @@ -0,0 +1,1 @@
  > +a
  > EOF
  adding foo to series file

  $ hg qpush
  applying foo
  now at: foo

  $ cd ..
  $ linkcp a b
  $ cd b

  $ hg qimport -n bar - << EOF
  > # HG changeset patch
  > # Date 2 0
  > diff -r 2588a8b53d66 a
  > --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  > +++ b/b	Wed Jul 23 15:54:29 2008 +0200
  > @@ -0,0 +1,1 @@
  > +b
  > EOF
  adding bar to series file

  $ hg qpush
  applying bar
  now at: bar

  $ cat .hg/patches/status
  430ed4828a74fa4047bc816a25500f7472ab4bfe:foo
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c:bar

  $ cat .hg/patches/series
  foo
  bar

  $ cat ../a/.hg/patches/status
  430ed4828a74fa4047bc816a25500f7472ab4bfe:foo

  $ cat ../a/.hg/patches/series
  foo

Test tags hardlinking:

  $ hg qdel -r qbase:qtip
  patch foo finalized without changeset message
  patch bar finalized without changeset message

  $ hg tag -l lfoo
  $ hg tag foo

  $ cd ..
  $ linkcp b c
  $ cd c

  $ hg tag -l -r 0 lbar
  $ hg tag -r 0 bar

  $ cat .hgtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c foo
  430ed4828a74fa4047bc816a25500f7472ab4bfe bar

  $ cat .hg/localtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c lfoo
  430ed4828a74fa4047bc816a25500f7472ab4bfe lbar

  $ cat ../b/.hgtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c foo

  $ cat ../b/.hg/localtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c lfoo

  $ cd ..