Mercurial > hg
view tests/test-treediscovery-legacy.t @ 33453:f6b7617a85bb
phases: add a 'registernew' method to set new phases
This new function will be used by code that adds new changesets. It ajusts the
phase boundary to make sure added changesets are at least in their target
phase (they end up in an higher phase if their parents are in a higher phase).
Having a dedicated function also simplify the phases tracking. All the new
nodes are passed as argument, so we know that all of them needs to have their
new phase registered. We also know that no other nodes will be affected, so no
extra computation are needed.
This function differ from 'retractboundary' where some nodes might change
phase while some other might not. It can also affect nodes not passed as
parameters.
These simplification also apply to the computation itself. For now we use
'_retractboundary' there by convenience, but we may introduces simpler code
later.
While registering new revisions, we still need to check the actual phases of
the added node because it might be higher than the target phase (eg: target is
draft but parent is secret).
We will migrate users over the next changesets.
author | Boris Feld <boris.feld@octobus.net> |
---|---|
date | Tue, 11 Jul 2017 03:47:25 +0200 |
parents | 8c14f87bd0ae |
children | eb586ed5d8ce |
line wrap: on
line source
#require killdaemons Tests discovery against servers without getbundle support: $ cat >> $HGRCPATH <<EOF > [ui] > logtemplate="{rev} {node|short}: {desc} {branches}\n" > EOF $ cp $HGRCPATH $HGRCPATH-withcap $ CAP="getbundle known changegroupsubset bundle2" $ . "$TESTDIR/notcapable" $ cp $HGRCPATH $HGRCPATH-nocap $ cp $HGRCPATH-withcap $HGRCPATH Prep for test server without branchmap support $ CAP="branchmap" $ . "$TESTDIR/notcapable" $ cp $HGRCPATH $HGRCPATH-nocap-branchmap $ cp $HGRCPATH-withcap $HGRCPATH Setup HTTP server control: $ remote=http://localhost:$HGPORT/ $ export remote $ tstart() { > echo '[web]' > $1/.hg/hgrc > echo 'push_ssl = false' >> $1/.hg/hgrc > echo 'allow_push = *' >> $1/.hg/hgrc > cp $HGRCPATH-nocap $HGRCPATH > hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -E errors.log > cat hg.pid >> $DAEMON_PIDS > } $ tstop() { > killdaemons.py > cp $HGRCPATH-withcap $HGRCPATH > } Both are empty: $ hg init empty1 $ hg init empty2 $ tstart empty2 $ hg incoming -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg outgoing -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg pull -R empty1 $remote pulling from http://localhost:$HGPORT/ no changes found $ hg push -R empty1 $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ tstop Base repo: $ hg init main $ cd main $ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip' $ hg log -G o 11 a19bfa7e7328: r11 both | o 10 8b6bad1512e1: r10 both | o 9 025829e08038: r9 both |\ | o 8 d8f638ac69e9: r8 name2 | | | o 7 b6b4d315a2ac: r7 name2 | | | o 6 6c6f5d5f3c11: r6 name2 | | | o 5 70314b29987d: r5 name2 | | o | 4 e71dbbc70e03: r4 name1 | | o | 3 2c8d5d5ec612: r3 name1 | | o | 2 a7892891da29: r2 name1 |/ o 1 0019a3b924fd: r1 | o 0 d57206cc072a: r0 $ cd .. $ tstart main Full clone: $ hg clone main full updating to branch default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd full $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is empty: $ cd empty1 $ hg incoming $remote --rev name1 comparing with http://localhost:$HGPORT/ abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability! [255] $ hg incoming $remote comparing with http://localhost:$HGPORT/ 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ requesting all changes adding changesets adding manifests adding file changes added 12 changesets with 24 changes to 2 files (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is subset: $ cp $HGRCPATH-withcap $HGRCPATH $ hg clone main subset --rev name2 ; cd subset adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cp $HGRCPATH-nocap $HGRCPATH $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Remote is empty: $ tstop ; tstart empty2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 12 changesets with 24 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is superset: $ tstop $ hg clone main subset2 --rev name2 adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ tstart subset2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes abort: push creates new remote branches: both, name1! (use 'hg push --new-branch' to create new remote branches) [255] $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 6 changesets with 12 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Partial pull: $ tstop ; tstart main $ hg clone $remote partial --rev name2 abort: partial pull cannot be done because other repository doesn't support changegroupsubset. [255] $ hg init partial; cd partial $ hg incoming $remote --rev name2 comparing with http://localhost:$HGPORT/ abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability! [255] $ hg pull $remote --rev name2 pulling from http://localhost:$HGPORT/ abort: partial pull cannot be done because other repository doesn't support changegroupsubset. [255] $ cd .. $ tstop Exercise pushing to server without branchmap capability $ cp $HGRCPATH-nocap-branchmap $HGRCPATH-nocap $ hg init rlocal $ cd rlocal $ echo A > A $ hg ci -Am A adding A $ cd .. $ hg clone rlocal rremote updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd rlocal $ echo B > B $ hg ci -Am B adding B $ cd .. $ tstart rremote $ cd rlocal $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 1 27547f69f254: B $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop