view tests/test-wireproto.t @ 33453:f6b7617a85bb

phases: add a 'registernew' method to set new phases

This new function will be used by code that adds new changesets. It ajusts the
phase boundary to make sure added changesets are at least in their target
phase (they end up in an higher phase if their parents are in a higher phase).

Having a dedicated function also simplify the phases tracking. All the new
nodes are passed as argument, so we know that all of them needs to have their
new phase registered. We also know that no other nodes will be affected, so no
extra computation are needed.

This function differ from 'retractboundary' where some nodes might change
phase while some other might not. It can also affect nodes not passed as
parameters.

These simplification also apply to the computation itself. For now we use
'_retractboundary' there by convenience, but we may introduces simpler code
later.

While registering new revisions, we still need to check the actual phases of
the added node because it might be higher than the target phase (eg: target is
draft but parent is secret).

We will migrate users over the next changesets.

#require killdaemons

Test wire protocol argument passing

Setup repo:

  $ hg init repo

Local:

  $ hg debugwireargs repo eins zwei --three drei --four vier
  eins zwei drei vier None
  $ hg debugwireargs repo eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs repo eins zwei
  eins zwei None None None
  $ hg debugwireargs repo eins zwei --five fuenf
  eins zwei None None fuenf

HTTP:

  $ hg  serve -R repo -p $HGPORT -d --pid-file=hg1.pid \
  >   -E error.log -A access.log \
  >   --config experimental.httppostargs=yes
  $ cat hg1.pid >> $DAEMON_PIDS

  $ hg debugwireargs http://localhost:$HGPORT/ un deux trois quatre
  un deux trois quatre None
  $ hg debugwireargs http://localhost:$HGPORT/ \ un deux trois\  qu\ \ atre
   un deux trois  qu  atre None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei --five fuenf
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
  un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
  $ cat error.log
  $ cat access.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)

HTTP without args-in-POST:
  $ hg serve -R repo -p $HGPORT1 -d --pid-file=hg1.pid -E error.log -A access.log
  $ cat hg1.pid >> $DAEMON_PIDS

  $ hg debugwireargs http://localhost:$HGPORT1/ un deux trois quatre
  un deux trois quatre None
  $ hg debugwireargs http://localhost:$HGPORT1/ \ un deux trois\  qu\ \ atre
   un deux trois  qu  atre None
  $ hg debugwireargs http://localhost:$HGPORT1/ eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs http://localhost:$HGPORT1/ eins zwei
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT1/ eins zwei --five fuenf
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT1/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
  un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
  $ cat error.log
  $ cat access.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
  * - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)

HTTP without the httpheader capability:

  $ HGRCPATH="`pwd`/repo/.hgrc"
  $ export HGRCPATH
  $ CAP=httpheader
  $ . "$TESTDIR/notcapable"

  $ hg serve -R repo -p $HGPORT2 -d --pid-file=hg2.pid -E error2.log -A access2.log
  $ cat hg2.pid >> $DAEMON_PIDS

  $ hg debugwireargs http://localhost:$HGPORT2/ un deux trois quatre
  un deux trois quatre None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --five fuenf
  eins zwei None None None
  $ cat error2.log
  $ cat access2.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=*zlib,none,bzip2 (glob)

SSH (try to exercise the ssh functionality with a dummy script):

  $ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo uno due tre quattro
  uno due tre quattro None
  $ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei
  eins zwei None None None
  $ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei --five fuenf
  eins zwei None None None

Explicitly kill daemons to let the test exit on Windows

  $ killdaemons.py