view tests/test-exchange-obsmarkers-case-A2.t @ 35816:f6ca1e11d8b4 stable

revset: evaluate filesets against each revision for 'file()' (issue5778)

After f2aeff8a87b6, the fileset was evaluated to a set of files against the
working directory, and then those files were applied against each revision.  The
result was nonsense.  For example, `hg log -r 'file("set:exec()")'` on the
Mercurial repo listed revision 0 because it has the `hg` script, which is
currently +x.  But that bit wasn't applied until revision 280 (which
'contains()' properly indicates).

This technique was borrowed from checkstatus(), which services adds(),
modifies(), and removes(), so it seems safe enough.  The 'r:' case is explicitly
assigned to wdirrev, freeing up rev=None to mean "re-evaluate at each revision".
The distinction is important to avoid behavior changes with `hg log set:...`
(test-largefiles-misc.t and test-fileset-generated.t drop current log output
without this).  I'm not sure what the right behavior for that is (1fd352aa08fc
explicitly enabled this behavior for graphlog), but the day before the release
isn't the time to experiment.

============================================
Testing obsolescence markers push: Cases A.2
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category A: simple cases
TestCase 2: Two heads, only one of them pushed

A.2 Two heads, only on of then pushed
=====================================

.. {{{
..     ⇠○ B
..   ⇠◔ | A
..    |/
..    ● O
.. }}}
..
.. Markers exist from:
..
..  * A
..  * B
..
..
.. Command runs:
..
..  * hg push -r A
..
.. Expected exchange:
..
..  * chain from A
..
.. Expected Exclude:
..
..  * chain from B

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos A.2
  creating test repo for test case A.2
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A
  $ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A)'`
  $ hg up '.~1'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ mkcommit B
  created new head
  $ hg debugobsolete bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb `getid 'desc(B)'`
  $ hg log -G
  @  35b183996678 (draft): B
  |
  | o  f5bc6836db60 (draft): A
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 35b1839966785d5703a01607229eea932db42f87 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

Actual Test
-----------

  $ dotest A.2 A
  ## Running testcase A.2
  # testing echange of "A" (f5bc6836db60)
  ## initial state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 35b1839966785d5703a01607229eea932db42f87 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 35b1839966785d5703a01607229eea932db42f87 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "f5bc6836db60" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  1 new obsolescence markers
  new changesets f5bc6836db60
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb 35b1839966785d5703a01607229eea932db42f87 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa f5bc6836db60e308a17ba08bf050154ba9c4fad7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

  $ cd ..