view tests/test-hgignore.t @ 35816:f6ca1e11d8b4 stable

revset: evaluate filesets against each revision for 'file()' (issue5778)

After f2aeff8a87b6, the fileset was evaluated to a set of files against the
working directory, and then those files were applied against each revision.  The
result was nonsense.  For example, `hg log -r 'file("set:exec()")'` on the
Mercurial repo listed revision 0 because it has the `hg` script, which is
currently +x.  But that bit wasn't applied until revision 280 (which
'contains()' properly indicates).

This technique was borrowed from checkstatus(), which services adds(),
modifies(), and removes(), so it seems safe enough.  The 'r:' case is explicitly
assigned to wdirrev, freeing up rev=None to mean "re-evaluate at each revision".
The distinction is important to avoid behavior changes with `hg log set:...`
(test-largefiles-misc.t and test-fileset-generated.t drop current log output
without this).  I'm not sure what the right behavior for that is (1fd352aa08fc
explicitly enabled this behavior for graphlog), but the day before the release
isn't the time to experiment.

  $ hg init ignorerepo
  $ cd ignorerepo

debugignore with no hgignore should be deterministic:
  $ hg debugignore
  <nevermatcher>

Issue562: .hgignore requires newline at end:

  $ touch foo
  $ touch bar
  $ touch baz
  $ cat > makeignore.py <<EOF
  > f = open(".hgignore", "w")
  > f.write("ignore\n")
  > f.write("foo\n")
  > # No EOL here
  > f.write("bar")
  > f.close()
  > EOF

  $ $PYTHON makeignore.py

Should display baz only:

  $ hg status
  ? baz

  $ rm foo bar baz .hgignore makeignore.py

  $ touch a.o
  $ touch a.c
  $ touch syntax
  $ mkdir dir
  $ touch dir/a.o
  $ touch dir/b.o
  $ touch dir/c.o

  $ hg add dir/a.o
  $ hg commit -m 0
  $ hg add dir/b.o

  $ hg status
  A dir/b.o
  ? a.c
  ? a.o
  ? dir/c.o
  ? syntax

  $ echo "*.o" > .hgignore
  $ hg status
  abort: $TESTTMP/ignorerepo/.hgignore: invalid pattern (relre): *.o (glob)
  [255]

Ensure given files are relative to cwd

  $ echo "dir/.*\.o" > .hgignore
  $ hg status -i
  I dir/c.o

  $ hg debugignore dir/c.o dir/missing.o
  dir/c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  dir/missing.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  $ cd dir
  $ hg debugignore c.o missing.o
  c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  missing.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)

For icasefs, inexact matches also work, except for missing files

#if icasefs
  $ hg debugignore c.O missing.O
  c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  missing.O is not ignored
#endif

  $ cd ..

  $ echo ".*\.o" > .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

Ensure that comments work:

  $ touch 'foo#bar' 'quux#'
#if no-windows
  $ touch 'baz\#wat'
#endif
  $ cat <<'EOF' >> .hgignore
  > # full-line comment
  >   # whitespace-only comment line
  > syntax# pattern, no whitespace, then comment
  > a.c  # pattern, then whitespace, then comment
  > baz\\# # escaped comment character
  > foo\#b # escaped comment character
  > quux\## escaped comment character at end of name
  > EOF
  $ hg status
  A dir/b.o
  ? .hgignore
  $ rm 'foo#bar' 'quux#'
#if no-windows
  $ rm 'baz\#wat'
#endif

Check that '^\.' does not ignore the root directory:

  $ echo "^\." > .hgignore
  $ hg status
  A dir/b.o
  ? a.c
  ? a.o
  ? dir/c.o
  ? syntax

Test that patterns from ui.ignore options are read:

  $ echo > .hgignore
  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ignore.other = $TESTTMP/ignorerepo/.hg/testhgignore
  > EOF
  $ echo "glob:**.o" > .hg/testhgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

empty out testhgignore
  $ echo > .hg/testhgignore

Test relative ignore path (issue4473):

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ignore.relative = .hg/testhgignorerel
  > EOF
  $ echo "glob:*.o" > .hg/testhgignorerel
  $ cd dir
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

  $ cd ..
  $ echo > .hg/testhgignorerel
  $ echo "syntax: glob" > .hgignore
  $ echo "re:.*\.o" >> .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

  $ echo "syntax: invalid" > .hgignore
  $ hg status
  $TESTTMP/ignorerepo/.hgignore: ignoring invalid syntax 'invalid'
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? dir/c.o
  ? syntax

  $ echo "syntax: glob" > .hgignore
  $ echo "*.o" >> .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

  $ echo "relglob:syntax*" > .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? dir/c.o

  $ echo "relglob:*" > .hgignore
  $ hg status
  A dir/b.o

  $ cd dir
  $ hg status .
  A b.o

  $ hg debugignore
  <includematcher includes='(?:(?:|.*/)[^/]*(?:/|$))'>

  $ hg debugignore b.o
  b.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: '*') (glob)

  $ cd ..

Check patterns that match only the directory

"(fsmonitor !)" below assumes that fsmonitor is enabled with
"walk_on_invalidate = false" (default), which doesn't involve
re-walking whole repository at detection of .hgignore change.

  $ echo "^dir\$" > .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? dir/c.o (fsmonitor !)
  ? syntax

Check recursive glob pattern matches no directories (dir/**/c.o matches dir/c.o)

  $ echo "syntax: glob" > .hgignore
  $ echo "dir/**/c.o" >> .hgignore
  $ touch dir/c.o
  $ mkdir dir/subdir
  $ touch dir/subdir/c.o
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? syntax
  $ hg debugignore a.c
  a.c is not ignored
  $ hg debugignore dir/c.o
  dir/c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 2: 'dir/**/c.o') (glob)

Check using 'include:' in ignore file

  $ hg purge --all --config extensions.purge=
  $ touch foo.included

  $ echo ".*.included" > otherignore
  $ hg status -I "include:otherignore"
  ? foo.included

  $ echo "include:otherignore" >> .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? otherignore

Check recursive uses of 'include:'

  $ echo "include:nested/ignore" >> otherignore
  $ mkdir nested
  $ echo "glob:*ignore" > nested/ignore
  $ hg status
  A dir/b.o

  $ cp otherignore goodignore
  $ echo "include:badignore" >> otherignore
  $ hg status
  skipping unreadable pattern file 'badignore': $ENOENT$
  A dir/b.o

  $ mv goodignore otherignore

Check using 'include:' while in a non-root directory

  $ cd ..
  $ hg -R ignorerepo status
  A dir/b.o
  $ cd ignorerepo

Check including subincludes

  $ hg revert -q --all
  $ hg purge --all --config extensions.purge=
  $ echo ".hgignore" > .hgignore
  $ mkdir dir1 dir2
  $ touch dir1/file1 dir1/file2 dir2/file1 dir2/file2
  $ echo "subinclude:dir2/.hgignore" >> .hgignore
  $ echo "glob:file*2" > dir2/.hgignore
  $ hg status
  ? dir1/file1
  ? dir1/file2
  ? dir2/file1

Check including subincludes with regexs

  $ echo "subinclude:dir1/.hgignore" >> .hgignore
  $ echo "regexp:f.le1" > dir1/.hgignore

  $ hg status
  ? dir1/file2
  ? dir2/file1

Check multiple levels of sub-ignores

  $ mkdir dir1/subdir
  $ touch dir1/subdir/subfile1 dir1/subdir/subfile3 dir1/subdir/subfile4
  $ echo "subinclude:subdir/.hgignore" >> dir1/.hgignore
  $ echo "glob:subfil*3" >> dir1/subdir/.hgignore

  $ hg status
  ? dir1/file2
  ? dir1/subdir/subfile4
  ? dir2/file1

Check include subignore at the same level

  $ mv dir1/subdir/.hgignore dir1/.hgignoretwo
  $ echo "regexp:f.le1" > dir1/.hgignore
  $ echo "subinclude:.hgignoretwo" >> dir1/.hgignore
  $ echo "glob:file*2" > dir1/.hgignoretwo

  $ hg status | grep file2
  [1]
  $ hg debugignore dir1/file2
  dir1/file2 is ignored
  (ignore rule in dir2/.hgignore, line 1: 'file*2')

#if windows

Windows paths are accepted on input

  $ rm dir1/.hgignore
  $ echo "dir1/file*" >> .hgignore
  $ hg debugignore "dir1\file2"
  dir1\file2 is ignored
  (ignore rule in $TESTTMP\ignorerepo\.hgignore, line 4: 'dir1/file*')
  $ hg up -qC .

#endif