Mercurial > hg
view hgext/relink.py @ 44363:f7459da77f23
nodemap: introduce an option to use mmap to read the nodemap mapping
The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.
This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).
Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:
Before:
* do not use the persistent nodemap
* use the CPython implementation of the index for nodemap
* use mmapping of the changelog index
After:
* use the MixedIndex Rust code, with the NodeTree object for nodemap access
(still in review)
* use the persistent nodemap data from disk
* access the persistent nodemap data through mmap
* use mmapping of the changelog index
The persistent nodemap greatly speed up most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.
Here are some numbers (in seconds) for the reference copy of mozilla-try:
Revset Before After abs-change speedup
-10000: 0.004622 0.005532 0.000910 × 0.83
-10: 0.000050 0.000132 0.000082 × 0.37
tip 0.000052 0.000085 0.000033 × 0.61
0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29
0 0.023521 0.000084 -0.023437 × 280.01
(-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37
(-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79
(-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55
:99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84
:9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68
:9 0.316450 0.000143 -0.316307 ×2212.93
On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.
Here are some numbers (in seconds) for the reference copy of mercurial:
Revset Before After abs-change speedup
-10: 0.000065 0.000097 0.000032 × 0.67
tip 0.000063 0.000078 0.000015 × 0.80
0 0.000561 0.000079 -0.000482 × 7.10
-10000: 0.004609 0.003648 -0.000961 × 1.26
0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35
(-10:) + :9 0.002187 0.000108 -0.002079 ×20.25
(-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68
(-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71
:9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96
:9 0.003854 0.000099 -0.003755 ×38.92
:99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02
Differential Revision: https://phab.mercurial-scm.org/D7894
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Tue, 11 Feb 2020 11:18:52 +0100 |
parents | eef9a2d67051 |
children | b5e7cdb93abc |
line wrap: on
line source
# Mercurial extension to provide 'hg relink' command # # Copyright (C) 2007 Brendan Cully <brendan@kublai.com> # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. """recreates hardlinks between repository clones""" from __future__ import absolute_import import os import stat from mercurial.i18n import _ from mercurial.pycompat import open from mercurial import ( error, hg, registrar, util, ) from mercurial.utils import stringutil cmdtable = {} command = registrar.command(cmdtable) # Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for # extensions which SHIP WITH MERCURIAL. Non-mainline extensions should # be specifying the version(s) of Mercurial they are tested with, or # leave the attribute unspecified. testedwith = b'ships-with-hg-core' @command( b'relink', [], _(b'[ORIGIN]'), helpcategory=command.CATEGORY_MAINTENANCE ) def relink(ui, repo, origin=None, **opts): """recreate hardlinks between two repositories When repositories are cloned locally, their data files will be hardlinked so that they only use the space of a single repository. Unfortunately, subsequent pulls into either repository will break hardlinks for any files touched by the new changesets, even if both repositories end up pulling the same changes. Similarly, passing --rev to "hg clone" will fail to use any hardlinks, falling back to a complete copy of the source repository. This command lets you recreate those hardlinks and reclaim that wasted space. This repository will be relinked to share space with ORIGIN, which must be on the same local disk. If ORIGIN is omitted, looks for "default-relink", then "default", in [paths]. Do not attempt any read operations on this repository while the command is running. (Both repositories will be locked against writes.) """ if not util.safehasattr(util, b'samefile') or not util.safehasattr( util, b'samedevice' ): raise error.Abort(_(b'hardlinks are not supported on this system')) src = hg.repository( repo.baseui, ui.expandpath(origin or b'default-relink', origin or b'default'), ) ui.status(_(b'relinking %s to %s\n') % (src.store.path, repo.store.path)) if repo.root == src.root: ui.status(_(b'there is nothing to relink\n')) return if not util.samedevice(src.store.path, repo.store.path): # No point in continuing raise error.Abort(_(b'source and destination are on different devices')) with repo.lock(), src.lock(): candidates = sorted(collect(src, ui)) targets = prune(candidates, src.store.path, repo.store.path, ui) do_relink(src.store.path, repo.store.path, targets, ui) def collect(src, ui): seplen = len(os.path.sep) candidates = [] live = len(src[b'tip'].manifest()) # Your average repository has some files which were deleted before # the tip revision. We account for that by assuming that there are # 3 tracked files for every 2 live files as of the tip version of # the repository. # # mozilla-central as of 2010-06-10 had a ratio of just over 7:5. total = live * 3 // 2 src = src.store.path progress = ui.makeprogress(_(b'collecting'), unit=_(b'files'), total=total) pos = 0 ui.status( _(b"tip has %d files, estimated total number of files: %d\n") % (live, total) ) for dirpath, dirnames, filenames in os.walk(src): dirnames.sort() relpath = dirpath[len(src) + seplen :] for filename in sorted(filenames): if filename[-2:] not in (b'.d', b'.i'): continue st = os.stat(os.path.join(dirpath, filename)) if not stat.S_ISREG(st.st_mode): continue pos += 1 candidates.append((os.path.join(relpath, filename), st)) progress.update(pos, item=filename) progress.complete() ui.status(_(b'collected %d candidate storage files\n') % len(candidates)) return candidates def prune(candidates, src, dst, ui): def linkfilter(src, dst, st): try: ts = os.stat(dst) except OSError: # Destination doesn't have this file? return False if util.samefile(src, dst): return False if not util.samedevice(src, dst): # No point in continuing raise error.Abort( _(b'source and destination are on different devices') ) if st.st_size != ts.st_size: return False return st targets = [] progress = ui.makeprogress( _(b'pruning'), unit=_(b'files'), total=len(candidates) ) pos = 0 for fn, st in candidates: pos += 1 srcpath = os.path.join(src, fn) tgt = os.path.join(dst, fn) ts = linkfilter(srcpath, tgt, st) if not ts: ui.debug(b'not linkable: %s\n' % fn) continue targets.append((fn, ts.st_size)) progress.update(pos, item=fn) progress.complete() ui.status( _(b'pruned down to %d probably relinkable files\n') % len(targets) ) return targets def do_relink(src, dst, files, ui): def relinkfile(src, dst): bak = dst + b'.bak' os.rename(dst, bak) try: util.oslink(src, dst) except OSError: os.rename(bak, dst) raise os.remove(bak) CHUNKLEN = 65536 relinked = 0 savedbytes = 0 progress = ui.makeprogress( _(b'relinking'), unit=_(b'files'), total=len(files) ) pos = 0 for f, sz in files: pos += 1 source = os.path.join(src, f) tgt = os.path.join(dst, f) # Binary mode, so that read() works correctly, especially on Windows sfp = open(source, b'rb') dfp = open(tgt, b'rb') sin = sfp.read(CHUNKLEN) while sin: din = dfp.read(CHUNKLEN) if sin != din: break sin = sfp.read(CHUNKLEN) sfp.close() dfp.close() if sin: ui.debug(b'not linkable: %s\n' % f) continue try: relinkfile(source, tgt) progress.update(pos, item=f) relinked += 1 savedbytes += sz except OSError as inst: ui.warn(b'%s: %s\n' % (tgt, stringutil.forcebytestr(inst))) progress.complete() ui.status( _(b'relinked %d files (%s reclaimed)\n') % (relinked, util.bytecount(savedbytes)) )