Mercurial > hg
view hgext/win32text.py @ 44363:f7459da77f23
nodemap: introduce an option to use mmap to read the nodemap mapping
The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.
This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).
Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:
Before:
* do not use the persistent nodemap
* use the CPython implementation of the index for nodemap
* use mmapping of the changelog index
After:
* use the MixedIndex Rust code, with the NodeTree object for nodemap access
(still in review)
* use the persistent nodemap data from disk
* access the persistent nodemap data through mmap
* use mmapping of the changelog index
The persistent nodemap greatly speed up most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.
Here are some numbers (in seconds) for the reference copy of mozilla-try:
Revset Before After abs-change speedup
-10000: 0.004622 0.005532 0.000910 × 0.83
-10: 0.000050 0.000132 0.000082 × 0.37
tip 0.000052 0.000085 0.000033 × 0.61
0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29
0 0.023521 0.000084 -0.023437 × 280.01
(-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37
(-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79
(-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55
:99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84
:9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68
:9 0.316450 0.000143 -0.316307 ×2212.93
On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.
Here are some numbers (in seconds) for the reference copy of mercurial:
Revset Before After abs-change speedup
-10: 0.000065 0.000097 0.000032 × 0.67
tip 0.000063 0.000078 0.000015 × 0.80
0 0.000561 0.000079 -0.000482 × 7.10
-10000: 0.004609 0.003648 -0.000961 × 1.26
0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35
(-10:) + :9 0.002187 0.000108 -0.002079 ×20.25
(-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68
(-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71
:9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96
:9 0.003854 0.000099 -0.003755 ×38.92
:99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02
Differential Revision: https://phab.mercurial-scm.org/D7894
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Tue, 11 Feb 2020 11:18:52 +0100 |
parents | 649d3ac37a12 |
children | 89a2afe31e82 |
line wrap: on
line source
# win32text.py - LF <-> CRLF/CR translation utilities for Windows/Mac users # # Copyright 2005, 2007-2009 Matt Mackall <mpm@selenic.com> and others # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. '''perform automatic newline conversion (DEPRECATED) Deprecation: The win32text extension requires each user to configure the extension again and again for each clone since the configuration is not copied when cloning. We have therefore made the ``eol`` as an alternative. The ``eol`` uses a version controlled file for its configuration and each clone will therefore use the right settings from the start. To perform automatic newline conversion, use:: [extensions] win32text = [encode] ** = cleverencode: # or ** = macencode: [decode] ** = cleverdecode: # or ** = macdecode: If not doing conversion, to make sure you do not commit CRLF/CR by accident:: [hooks] pretxncommit.crlf = python:hgext.win32text.forbidcrlf # or pretxncommit.cr = python:hgext.win32text.forbidcr To do the same check on a server to prevent CRLF/CR from being pushed or pulled:: [hooks] pretxnchangegroup.crlf = python:hgext.win32text.forbidcrlf # or pretxnchangegroup.cr = python:hgext.win32text.forbidcr ''' from __future__ import absolute_import import re from mercurial.i18n import _ from mercurial.node import short from mercurial import ( pycompat, registrar, ) from mercurial.utils import stringutil # Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for # extensions which SHIP WITH MERCURIAL. Non-mainline extensions should # be specifying the version(s) of Mercurial they are tested with, or # leave the attribute unspecified. testedwith = b'ships-with-hg-core' configtable = {} configitem = registrar.configitem(configtable) configitem( b'win32text', b'warn', default=True, ) # regexp for single LF without CR preceding. re_single_lf = re.compile(b'(^|[^\r])\n', re.MULTILINE) newlinestr = {b'\r\n': b'CRLF', b'\r': b'CR'} filterstr = {b'\r\n': b'clever', b'\r': b'mac'} def checknewline(s, newline, ui=None, repo=None, filename=None): # warn if already has 'newline' in repository. # it might cause unexpected eol conversion. # see issue 302: # https://bz.mercurial-scm.org/302 if newline in s and ui and filename and repo: ui.warn( _( b'WARNING: %s already has %s line endings\n' b'and does not need EOL conversion by the win32text plugin.\n' b'Before your next commit, please reconsider your ' b'encode/decode settings in \nMercurial.ini or %s.\n' ) % (filename, newlinestr[newline], repo.vfs.join(b'hgrc')) ) def dumbdecode(s, cmd, **kwargs): checknewline(s, b'\r\n', **kwargs) # replace single LF to CRLF return re_single_lf.sub(b'\\1\r\n', s) def dumbencode(s, cmd): return s.replace(b'\r\n', b'\n') def macdumbdecode(s, cmd, **kwargs): checknewline(s, b'\r', **kwargs) return s.replace(b'\n', b'\r') def macdumbencode(s, cmd): return s.replace(b'\r', b'\n') def cleverdecode(s, cmd, **kwargs): if not stringutil.binary(s): return dumbdecode(s, cmd, **kwargs) return s def cleverencode(s, cmd): if not stringutil.binary(s): return dumbencode(s, cmd) return s def macdecode(s, cmd, **kwargs): if not stringutil.binary(s): return macdumbdecode(s, cmd, **kwargs) return s def macencode(s, cmd): if not stringutil.binary(s): return macdumbencode(s, cmd) return s _filters = { b'dumbdecode:': dumbdecode, b'dumbencode:': dumbencode, b'cleverdecode:': cleverdecode, b'cleverencode:': cleverencode, b'macdumbdecode:': macdumbdecode, b'macdumbencode:': macdumbencode, b'macdecode:': macdecode, b'macencode:': macencode, } def forbidnewline(ui, repo, hooktype, node, newline, **kwargs): halt = False seen = set() # we try to walk changesets in reverse order from newest to # oldest, so that if we see a file multiple times, we take the # newest version as canonical. this prevents us from blocking a # changegroup that contains an unacceptable commit followed later # by a commit that fixes the problem. tip = repo[b'tip'] for rev in pycompat.xrange( repo.changelog.tiprev(), repo[node].rev() - 1, -1 ): c = repo[rev] for f in c.files(): if f in seen or f not in tip or f not in c: continue seen.add(f) data = c[f].data() if not stringutil.binary(data) and newline in data: if not halt: ui.warn( _( b'attempt to commit or push text file(s) ' b'using %s line endings\n' ) % newlinestr[newline] ) ui.warn(_(b'in %s: %s\n') % (short(c.node()), f)) halt = True if halt and hooktype == b'pretxnchangegroup': crlf = newlinestr[newline].lower() filter = filterstr[newline] ui.warn( _( b'\nTo prevent this mistake in your local repository,\n' b'add to Mercurial.ini or .hg/hgrc:\n' b'\n' b'[hooks]\n' b'pretxncommit.%s = python:hgext.win32text.forbid%s\n' b'\n' b'and also consider adding:\n' b'\n' b'[extensions]\n' b'win32text =\n' b'[encode]\n' b'** = %sencode:\n' b'[decode]\n' b'** = %sdecode:\n' ) % (crlf, crlf, filter, filter) ) return halt def forbidcrlf(ui, repo, hooktype, node, **kwargs): return forbidnewline(ui, repo, hooktype, node, b'\r\n', **kwargs) def forbidcr(ui, repo, hooktype, node, **kwargs): return forbidnewline(ui, repo, hooktype, node, b'\r', **kwargs) def reposetup(ui, repo): if not repo.local(): return for name, fn in pycompat.iteritems(_filters): repo.adddatafilter(name, fn) def extsetup(ui): # deprecated config: win32text.warn if ui.configbool(b'win32text', b'warn'): ui.warn( _( b"win32text is deprecated: " b"https://mercurial-scm.org/wiki/Win32TextExtension\n" ) )