view i18n/hggettext @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping The performance and memory benefit is much greater if we don't have to copy all the data in memory for each information. So we introduce an option (on by default) to read the data using mmap. This changeset is the last one definition the API for index support nodemap data. (they have to be able to use the mmaping). Below are some benchmark comparing the best we currently have in 5.3 with the final step of this series (using the persistent nodemap implementation in Rust). The benchmark run `hg perfindex` with various revset and the following variants: Before: * do not use the persistent nodemap * use the CPython implementation of the index for nodemap * use mmapping of the changelog index After: * use the MixedIndex Rust code, with the NodeTree object for nodemap access (still in review) * use the persistent nodemap data from disk * access the persistent nodemap data through mmap * use mmapping of the changelog index The persistent nodemap greatly speed up most operation on very large repositories. Some of the previously very fast lookup end up a bit slower because the persistent nodemap has to be setup. However the absolute slowdown is very small and won't matters in the big picture. Here are some numbers (in seconds) for the reference copy of mozilla-try: Revset Before After abs-change speedup -10000: 0.004622 0.005532 0.000910 × 0.83 -10: 0.000050 0.000132 0.000082 × 0.37 tip 0.000052 0.000085 0.000033 × 0.61 0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29 0 0.023521 0.000084 -0.023437 × 280.01 (-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37 (-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79 (-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55 :99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84 :9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68 :9 0.316450 0.000143 -0.316307 ×2212.93 On smaller repositories, the cost of nodemap related operation is not as big, so the win is much more modest. Yet it helps shaving a handful of millisecond here and there. Here are some numbers (in seconds) for the reference copy of mercurial: Revset Before After abs-change speedup -10: 0.000065 0.000097 0.000032 × 0.67 tip 0.000063 0.000078 0.000015 × 0.80 0 0.000561 0.000079 -0.000482 × 7.10 -10000: 0.004609 0.003648 -0.000961 × 1.26 0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35 (-10:) + :9 0.002187 0.000108 -0.002079 ×20.25 (-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68 (-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71 :9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96 :9 0.003854 0.000099 -0.003755 ×38.92 :99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02 Differential Revision: https://phab.mercurial-scm.org/D7894
author Pierre-Yves David <pierre-yves.david@octobus.net>
date Tue, 11 Feb 2020 11:18:52 +0100
parents 47ef023d0165
children bea8cf87bef3
line wrap: on
line source

#!/usr/bin/env python
#
# hggettext - carefully extract docstrings for Mercurial
#
# Copyright 2009 Matt Mackall <mpm@selenic.com> and others
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

# The normalize function is taken from pygettext which is distributed
# with Python under the Python License, which is GPL compatible.

"""Extract docstrings from Mercurial commands.

Compared to pygettext, this script knows about the cmdtable and table
dictionaries used by Mercurial, and will only extract docstrings from
functions mentioned therein.

Use xgettext like normal to extract strings marked as translatable and
join the message cataloges to get the final catalog.
"""

from __future__ import absolute_import, print_function

import inspect
import os
import re
import sys


def escape(s):
    # The order is important, the backslash must be escaped first
    # since the other replacements introduce new backslashes
    # themselves.
    s = s.replace('\\', '\\\\')
    s = s.replace('\n', '\\n')
    s = s.replace('\r', '\\r')
    s = s.replace('\t', '\\t')
    s = s.replace('"', '\\"')
    return s


def normalize(s):
    # This converts the various Python string types into a format that
    # is appropriate for .po files, namely much closer to C style.
    lines = s.split('\n')
    if len(lines) == 1:
        s = '"' + escape(s) + '"'
    else:
        if not lines[-1]:
            del lines[-1]
            lines[-1] = lines[-1] + '\n'
        lines = map(escape, lines)
        lineterm = '\\n"\n"'
        s = '""\n"' + lineterm.join(lines) + '"'
    return s


def poentry(path, lineno, s):
    return (
        '#: %s:%d\n' % (path, lineno)
        + 'msgid %s\n' % normalize(s)
        + 'msgstr ""\n'
    )


doctestre = re.compile(r'^ +>>> ', re.MULTILINE)


def offset(src, doc, name, lineno, default):
    """Compute offset or issue a warning on stdout."""
    # remove doctest part, in order to avoid backslash mismatching
    m = doctestre.search(doc)
    if m:
        doc = doc[: m.start()]

    # Backslashes in doc appear doubled in src.
    end = src.find(doc.replace('\\', '\\\\'))
    if end == -1:
        # This can happen if the docstring contains unnecessary escape
        # sequences such as \" in a triple-quoted string. The problem
        # is that \" is turned into " and so doc wont appear in src.
        sys.stderr.write(
            "%s:%d:warning:"
            " unknown docstr offset, assuming %d lines\n"
            % (name, lineno, default)
        )
        return default
    else:
        return src.count('\n', 0, end)


def importpath(path):
    """Import a path like foo/bar/baz.py and return the baz module."""
    if path.endswith('.py'):
        path = path[:-3]
    if path.endswith('/__init__'):
        path = path[:-9]
    path = path.replace('/', '.')
    mod = __import__(path)
    for comp in path.split('.')[1:]:
        mod = getattr(mod, comp)
    return mod


def docstrings(path):
    """Extract docstrings from path.

    This respects the Mercurial cmdtable/table convention and will
    only extract docstrings from functions mentioned in these tables.
    """
    mod = importpath(path)
    if not path.startswith('mercurial/') and mod.__doc__:
        with open(path) as fobj:
            src = fobj.read()
        lineno = 1 + offset(src, mod.__doc__, path, 1, 7)
        print(poentry(path, lineno, mod.__doc__))

    functions = list(getattr(mod, 'i18nfunctions', []))
    functions = [(f, True) for f in functions]

    cmdtable = getattr(mod, 'cmdtable', {})
    if not cmdtable:
        # Maybe we are processing mercurial.commands?
        cmdtable = getattr(mod, 'table', {})
    functions.extend((c[0], False) for c in cmdtable.itervalues())

    for func, rstrip in functions:
        if func.__doc__:
            docobj = func  # this might be a proxy to provide formatted doc
            func = getattr(func, '_origfunc', func)
            funcmod = inspect.getmodule(func)
            extra = ''
            if funcmod.__package__ == funcmod.__name__:
                extra = '/__init__'
            actualpath = '%s%s.py' % (funcmod.__name__.replace('.', '/'), extra)

            src = inspect.getsource(func)
            lineno = inspect.getsourcelines(func)[1]
            doc = docobj.__doc__
            origdoc = getattr(docobj, '_origdoc', '')
            if rstrip:
                doc = doc.rstrip()
                origdoc = origdoc.rstrip()
            if origdoc:
                lineno += offset(src, origdoc, actualpath, lineno, 1)
            else:
                lineno += offset(src, doc, actualpath, lineno, 1)
            print(poentry(actualpath, lineno, doc))


def rawtext(path):
    with open(path) as f:
        src = f.read()
    print(poentry(path, 1, src))


if __name__ == "__main__":
    # It is very important that we import the Mercurial modules from
    # the source tree where hggettext is executed. Otherwise we might
    # accidentally import and extract strings from a Mercurial
    # installation mentioned in PYTHONPATH.
    sys.path.insert(0, os.getcwd())
    from mercurial import demandimport

    demandimport.enable()
    for path in sys.argv[1:]:
        if path.endswith('.txt'):
            rawtext(path)
        else:
            docstrings(path)