view tests/dummysmtpd.py @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping The performance and memory benefit is much greater if we don't have to copy all the data in memory for each information. So we introduce an option (on by default) to read the data using mmap. This changeset is the last one definition the API for index support nodemap data. (they have to be able to use the mmaping). Below are some benchmark comparing the best we currently have in 5.3 with the final step of this series (using the persistent nodemap implementation in Rust). The benchmark run `hg perfindex` with various revset and the following variants: Before: * do not use the persistent nodemap * use the CPython implementation of the index for nodemap * use mmapping of the changelog index After: * use the MixedIndex Rust code, with the NodeTree object for nodemap access (still in review) * use the persistent nodemap data from disk * access the persistent nodemap data through mmap * use mmapping of the changelog index The persistent nodemap greatly speed up most operation on very large repositories. Some of the previously very fast lookup end up a bit slower because the persistent nodemap has to be setup. However the absolute slowdown is very small and won't matters in the big picture. Here are some numbers (in seconds) for the reference copy of mozilla-try: Revset Before After abs-change speedup -10000: 0.004622 0.005532 0.000910 × 0.83 -10: 0.000050 0.000132 0.000082 × 0.37 tip 0.000052 0.000085 0.000033 × 0.61 0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29 0 0.023521 0.000084 -0.023437 × 280.01 (-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37 (-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79 (-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55 :99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84 :9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68 :9 0.316450 0.000143 -0.316307 ×2212.93 On smaller repositories, the cost of nodemap related operation is not as big, so the win is much more modest. Yet it helps shaving a handful of millisecond here and there. Here are some numbers (in seconds) for the reference copy of mercurial: Revset Before After abs-change speedup -10: 0.000065 0.000097 0.000032 × 0.67 tip 0.000063 0.000078 0.000015 × 0.80 0 0.000561 0.000079 -0.000482 × 7.10 -10000: 0.004609 0.003648 -0.000961 × 1.26 0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35 (-10:) + :9 0.002187 0.000108 -0.002079 ×20.25 (-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68 (-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71 :9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96 :9 0.003854 0.000099 -0.003755 ×38.92 :99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02 Differential Revision: https://phab.mercurial-scm.org/D7894
author Pierre-Yves David <pierre-yves.david@octobus.net>
date Tue, 11 Feb 2020 11:18:52 +0100
parents 2372284d9457
children c102b704edb5
line wrap: on
line source

#!/usr/bin/env python

"""dummy SMTP server for use in tests"""

from __future__ import absolute_import

import asyncore
import optparse
import smtpd
import ssl
import sys
import traceback

from mercurial import (
    pycompat,
    server,
    sslutil,
    ui as uimod,
)


def log(msg):
    sys.stdout.write(msg)
    sys.stdout.flush()


class dummysmtpserver(smtpd.SMTPServer):
    def __init__(self, localaddr):
        smtpd.SMTPServer.__init__(self, localaddr, remoteaddr=None)

    def process_message(self, peer, mailfrom, rcpttos, data, **kwargs):
        log('%s from=%s to=%s\n' % (peer[0], mailfrom, ', '.join(rcpttos)))

    def handle_error(self):
        # On Windows, a bad SSL connection sometimes generates a WSAECONNRESET.
        # The default handler will shutdown this server, and then both the
        # current connection and subsequent ones fail on the client side with
        # "No connection could be made because the target machine actively
        # refused it".  If we eat the error, then the client properly aborts in
        # the expected way, and the server is available for subsequent requests.
        traceback.print_exc()


class dummysmtpsecureserver(dummysmtpserver):
    def __init__(self, localaddr, certfile):
        dummysmtpserver.__init__(self, localaddr)
        self._certfile = certfile

    def handle_accept(self):
        pair = self.accept()
        if not pair:
            return
        conn, addr = pair
        ui = uimod.ui.load()
        try:
            # wrap_socket() would block, but we don't care
            conn = sslutil.wrapserversocket(conn, ui, certfile=self._certfile)
        except ssl.SSLError:
            log('%s ssl error\n' % addr[0])
            conn.close()
            return
        smtpd.SMTPChannel(self, conn, addr)


def run():
    try:
        asyncore.loop()
    except KeyboardInterrupt:
        pass


def _encodestrsonly(v):
    if isinstance(v, type(u'')):
        return v.encode('ascii')
    return v


def bytesvars(obj):
    unidict = vars(obj)
    bd = {k.encode('ascii'): _encodestrsonly(v) for k, v in unidict.items()}
    if bd[b'daemon_postexec'] is not None:
        bd[b'daemon_postexec'] = [
            _encodestrsonly(v) for v in bd[b'daemon_postexec']
        ]
    return bd


def main():
    op = optparse.OptionParser()
    op.add_option('-d', '--daemon', action='store_true')
    op.add_option('--daemon-postexec', action='append')
    op.add_option('-p', '--port', type=int, default=8025)
    op.add_option('-a', '--address', default='localhost')
    op.add_option('--pid-file', metavar='FILE')
    op.add_option('--tls', choices=['none', 'smtps'], default='none')
    op.add_option('--certificate', metavar='FILE')

    opts, args = op.parse_args()
    if opts.tls == 'smtps' and not opts.certificate:
        op.error('--certificate must be specified')

    addr = (opts.address, opts.port)

    def init():
        if opts.tls == 'none':
            dummysmtpserver(addr)
        else:
            dummysmtpsecureserver(addr, opts.certificate)
        log('listening at %s:%d\n' % addr)

    server.runservice(
        bytesvars(opts),
        initfn=init,
        runfn=run,
        runargs=[pycompat.sysexecutable, pycompat.fsencode(__file__)]
        + pycompat.sysargv[1:],
    )


if __name__ == '__main__':
    main()