view tests/test-bookflow.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

initialize
  $ make_changes() {
  >     d=`pwd`
  >     [ ! -z $1 ] && cd $1
  >     echo "test `basename \`pwd\``" >> test
  >     hg commit -Am"${2:-test}"
  >     r=$?
  >     cd $d
  >     return $r
  > }
  $ ls -1a
  .
  ..
  $ hg init a
  $ cd a
  $ echo 'test' > test; hg commit -Am'test'
  adding test

clone to b

  $ mkdir ../b
  $ cd ../b
  $ hg clone ../a .
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo "[extensions]" >> .hg/hgrc
  $ echo "bookflow=" >> .hg/hgrc
  $ hg branch X
  abort: creating named branches is disabled and you should use bookmarks
  (see 'hg help bookflow')
  [255]
  $ hg bookmark X
  $ hg bookmarks
  * X                         0:* (glob)
  $ hg bookmark X
  abort: bookmark X already exists, to move use the --rev option
  [255]
  $ make_changes
  $ hg push ../a -q

  $ hg bookmarks
   \* X                         1:* (glob)

change a
  $ cd ../a
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 'test' >> test; hg commit -Am'test'


pull in b
  $ cd ../b
  $ hg pull -u
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets * (glob)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark X)
  $ hg status
  $ hg bookmarks
     X                         1:* (glob)

check protection of @ bookmark
  $ hg bookmark @
  $ hg bookmarks
   \* @                         2:* (glob)
     X                         1:* (glob)
  $ make_changes
  abort: cannot commit, bookmark @ is protected
  [255]

  $ hg status
  M test
  $ hg bookmarks
   \* @                         2:* (glob)
     X                         1:* (glob)

  $ hg --config bookflow.protect= commit  -Am"Updated test"

  $ hg bookmarks
   \* @                         3:* (glob)
     X                         1:* (glob)

check requirement for an active bookmark
  $ hg bookmark -i
  $ hg bookmarks
     @                         3:* (glob)
     X                         1:* (glob)
  $ make_changes
  abort: cannot commit without an active bookmark
  [255]
  $ hg revert test
  $ rm test.orig
  $ hg status


make the bookmark move by updating it on a, and then pulling
# add a commit to a
  $ cd ../a
  $ hg bookmark X
  $ hg bookmarks
   \* X                         2:* (glob)
  $ make_changes
  $ hg bookmarks
   * X                         3:81af7977fdb9

# go back to b, and check out X
  $ cd ../b
  $ hg up X
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark X)
  $ hg bookmarks
     @                         3:* (glob)
   \* X                         1:* (glob)

# pull, this should move the bookmark forward, because it was changed remotely
  $ hg pull -u | grep "updating to active bookmark X"
  updating to active bookmark X

  $ hg bookmarks
     @                         3:* (glob)
   * X                         4:81af7977fdb9

the bookmark should not move if it diverged from remote
  $ hg -R ../a status
  $ hg -R ../b status
  $ make_changes ../a
  $ make_changes ../b
  $ hg -R ../a status
  $ hg -R ../b status
  $ hg -R ../a bookmarks
   * X                         4:238292f60a57
  $ hg -R ../b bookmarks
     @                         3:* (glob)
   * X                         5:096f7e86892d
  $ cd ../b
  $ # make sure we cannot push after bookmarks diverged
  $ hg push -B X | grep abort
  abort: push creates new remote head * with bookmark 'X'! (glob)
  (pull and merge or see 'hg help push' for details about pushing new heads)
  [1]
  $ hg pull -u | grep divergent
  divergent bookmark X stored as X@default
  1 other divergent bookmarks for "X"
  $ hg bookmarks
     @                         3:* (glob)
   * X                         5:096f7e86892d
     X@default                 6:238292f60a57
  $ hg id -in
  096f7e86892d 5
  $ make_changes
  $ hg status
  $ hg bookmarks
     @                         3:* (glob)
   * X                         7:227f941aeb07
     X@default                 6:238292f60a57

now merge with the remote bookmark
  $ hg merge X@default --tool :local -q
  $ hg status
  M test
  $ hg commit -m"Merged with X@default"
  $ hg bookmarks
     @                         3:* (glob)
   * X                         8:26fed9bb3219
  $ hg push -B X | grep bookmark
  pushing to $TESTTMP/a (?)
  updating bookmark X
  $ cd ../a
  $ hg up -q
  $ hg bookmarks
   * X                         7:26fed9bb3219

test hg pull when there is more than one descendant
  $ cd ../a
  $ hg bookmark Z
  $ hg bookmark Y
  $ make_changes . YY
  $ hg up Z -q
  $ make_changes . ZZ
  created new head
  $ hg bookmarks
     X                         7:26fed9bb3219
     Y                         8:131e663dbd2a
   * Z                         9:b74a4149df25
  $ hg log -r 'p1(Y)' -r 'p1(Z)' -T '{rev}\n' # prove that Y and Z share the same parent
  7
  $ hg log -r 'Y%Z' -T '{rev}\n'  # revs in Y but not in Z
  8
  $ hg log -r 'Z%Y' -T '{rev}\n'  # revs in Z but not in Y
  9
  $ cd ../b
  $ hg pull -uq
  $ hg id
  b74a4149df25 tip Z
  $ hg bookmarks | grep \*  # no active bookmark
  [1]


test shelving
  $ cd ../a
  $ echo anotherfile > anotherfile # this change should not conflict
  $ hg add anotherfile
  $ hg commit -m"Change in a"
  $ cd ../b
  $ hg up Z | grep Z
  (activating bookmark Z)
  $ hg book | grep \* # make sure active bookmark
   \* Z                         10:* (glob)
  $ echo "test b" >> test
  $ hg diff --stat
   test |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  $ hg shelve
  shelved as Z
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg pull -uq
  $ hg unshelve
  unshelving change 'Z'
  rebasing shelved changes
  $ hg diff --stat
   test |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)


make the bookmark move by updating it on a, and then pulling with a local change
# add a commit to a
  $ cd ../a
  $ hg up -C X |fgrep  "activating bookmark X"
  (activating bookmark X)
# go back to b, and check out X
  $ cd ../b
  $ hg up -C X |fgrep  "activating bookmark X"
  (activating bookmark X)
# update and push from a
  $ make_changes ../a
  created new head
  $ echo "more" >> test
  $ hg pull -u 2>&1 | fgrep -v TESTTMP| fgrep -v "searching for changes" | fgrep -v adding
  pulling from $TESTTMP/a
  updating bookmark X
  added 1 changesets with 0 changes to 0 files (+1 heads)
  new changesets * (glob)
  updating to active bookmark X
  merging test
  warning: conflicts while merging test! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges
  $ hg update -Cq
  $ rm test.orig

make sure that commits aren't possible if working directory is not pointing to active bookmark
  $ hg -R ../a status
  $ hg -R ../b status
  $ hg -R ../a id -i
  36a6e592ec06
  $ hg -R ../a book | grep X
   \* X                         \d+:36a6e592ec06 (re)
  $ hg -R ../b id -i
  36a6e592ec06
  $ hg -R ../b book | grep X
   \* X                         \d+:36a6e592ec06 (re)
  $ make_changes ../a
  $ hg -R ../a book | grep X
   \* X                         \d+:f73a71c992b8 (re)
  $ cd ../b
  $ hg pull  2>&1 | grep -v add | grep -v pulling | grep -v searching | grep -v changeset
  updating bookmark X
  (run 'hg update' to get a working copy)
  working directory out of sync with active bookmark, run 'hg up X'
  $ hg id -i # we're still on the old commit
  36a6e592ec06
  $ hg book | grep X # while the bookmark moved
   \* X                         \d+:f73a71c992b8 (re)
  $ make_changes
  abort: cannot commit, working directory out of sync with active bookmark
  (run 'hg up X')
  [255]
  $ hg up -Cq -r .  # cleanup local changes
  $ hg status
  $ hg id -i # we're still on the old commit
  36a6e592ec06
  $ hg up X -q
  $ hg id -i # now we're on X
  f73a71c992b8
  $ hg book | grep X
   \* X                         \d+:f73a71c992b8 (re)