view tests/test-contrib-testparseutil.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

  $ testparseutil="$TESTDIR"/../contrib/testparseutil.py

Internal test by doctest

  $ "$PYTHON" -m doctest "$testparseutil"

Tests for embedded python script

Typical cases

  $ "$PYTHON" "$testparseutil" -v pyembedded <<NO_CHECK_EOF
  >   >>> for f in [1, 2, 3]:
  >   ...     foo = 1
  >   >>> foo = 2
  >   $ echo "doctest is terminated by command, empty line, or comment"
  >   >>> foo = 31
  >   expected output of doctest fragment
  >   >>> foo = 32
  >   
  >   >>> foo = 33
  > 
  >   >>> foo = 34
  > comment
  >   >>> foo = 35
  > 
  >   $ "\$PYTHON" <<EOF
  >   > foo = 4
  >   > 
  >   > EOF
  >   $ cat > foo.py <<EOF
  >   > foo = 5
  >   > EOF
  >   $ cat >> foo.py <<EOF
  >   > foo = 6 # appended
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ "\$PYTHON" <<NO_CHECK_EOF
  >   > foo = 7 # this should be ignored at detection
  >   > NO_CHECK_EOF
  >   $ cat > foo.py <<NO_CHECK_EOF
  >   > foo = 8 # this should be ignored at detection
  >   > NO_CHECK_EOF
  > 
  > doctest fragment ended by EOF
  > 
  >   >>> foo = 9
  > NO_CHECK_EOF
  <stdin>:1: <anonymous> starts
    |for f in [1, 2, 3]:
    |    foo = 1
    |foo = 2
  <stdin>:4: <anonymous> ends
  <stdin>:5: <anonymous> starts
    |foo = 31
    |
    |foo = 32
    |
    |foo = 33
  <stdin>:10: <anonymous> ends
  <stdin>:11: <anonymous> starts
    |foo = 34
  <stdin>:12: <anonymous> ends
  <stdin>:13: <anonymous> starts
    |foo = 35
  <stdin>:14: <anonymous> ends
  <stdin>:16: <anonymous> starts
    |foo = 4
    |
  <stdin>:18: <anonymous> ends
  <stdin>:20: foo.py starts
    |foo = 5
  <stdin>:21: foo.py ends
  <stdin>:23: foo.py starts
    |foo = 6 # appended
  <stdin>:24: foo.py ends
  <stdin>:38: <anonymous> starts
    |foo = 9
  <stdin>:39: <anonymous> ends

Invalid test script

(similar test for shell script and hgrc configuration is omitted,
because this tests common base class of them)

  $ "$PYTHON" "$testparseutil" -v pyembedded <<NO_CHECK_EOF > detected
  >   $ "\$PYTHON" <<EOF
  >   > foo = 1
  > 
  >   $ "\$PYTHON" <<EOF
  >   > foo = 2
  >   $ cat > bar.py <<EOF
  >   > bar = 2 # this fragment will be detected as expected
  >   > EOF
  > 
  >   $ cat > foo.py <<EOF
  >   > foo = 3
  > NO_CHECK_EOF
  <stdin>:3: unexpected line for "heredoc python invocation"
  <stdin>:6: unexpected line for "heredoc python invocation"
  <stdin>:11: unexpected end of file for "heredoc .py file"
  [1]
  $ cat detected
  <stdin>:7: bar.py starts
    |bar = 2 # this fragment will be detected as expected
  <stdin>:8: bar.py ends

Tests for embedded shell script

  $ "$PYTHON" "$testparseutil" -v shembedded <<NO_CHECK_EOF
  >   $ cat > foo.sh <<EOF
  >   > foo = 1
  >   > 
  >   > foo = 2
  >   > EOF
  >   $ cat >> foo.sh <<EOF
  >   > foo = 3 # appended
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ cat > foo.sh <<NO_CHECK_EOF
  >   > # this should be ignored at detection
  >   > foo = 4
  >   > NO_CHECK_EOF
  > 
  > NO_CHECK_EOF
  <stdin>:2: foo.sh starts
    |foo = 1
    |
    |foo = 2
  <stdin>:5: foo.sh ends
  <stdin>:7: foo.sh starts
    |foo = 3 # appended
  <stdin>:8: foo.sh ends

Tests for embedded hgrc configuration

  $ "$PYTHON" "$testparseutil" -v hgrcembedded <<NO_CHECK_EOF
  >   $ cat > .hg/hgrc <<EOF
  >   > [ui]
  >   > verbose = true
  >   > 
  >   > # end of local configuration
  >   > EOF
  > 
  >   $ cat > \$HGRCPATH <<EOF
  >   > [extensions]
  >   > rebase =
  >   > # end of global configuration
  >   > EOF
  > 
  >   $ cat >> \$HGRCPATH <<EOF
  >   > # appended
  >   > [extensions]
  >   > rebase =!
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ cat > .hg/hgrc <<NO_CHECK_EOF
  >   > # this local configuration should be ignored at detection
  >   > [ui]
  >   > username = foo bar
  >   > NO_CHECK_EOF
  > 
  >   $ cat > \$HGRCPATH <<NO_CHECK_EOF
  >   > # this global configuration should be ignored at detection
  >   > [extensions]
  >   > foobar =
  >   > NO_CHECK_EOF
  > NO_CHECK_EOF
  <stdin>:2: .hg/hgrc starts
    |[ui]
    |verbose = true
    |
    |# end of local configuration
  <stdin>:6: .hg/hgrc ends
  <stdin>:9: $HGRCPATH starts
    |[extensions]
    |rebase =
    |# end of global configuration
  <stdin>:12: $HGRCPATH ends
  <stdin>:15: $HGRCPATH starts
    |# appended
    |[extensions]
    |rebase =!
  <stdin>:18: $HGRCPATH ends