view tests/test-contrib.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

Set vars:

  $ CONTRIBDIR="$TESTDIR/../contrib"

Test simplemerge command:

  $ cp "$CONTRIBDIR/simplemerge" .
  $ echo base > base
  $ echo local > local
  $ cat base >> local
  $ cp local orig
  $ cat base > other
  $ echo other >> other

changing local directly

  $ "$PYTHON" simplemerge local base other && echo "merge succeeded"
  merge succeeded
  $ cat local
  local
  base
  other
  $ cp orig local

printing to stdout

  $ "$PYTHON" simplemerge -p local base other
  local
  base
  other

local:

  $ cat local
  local
  base

conflicts

  $ cp base conflict-local
  $ cp other conflict-other
  $ echo not other >> conflict-local
  $ echo end >> conflict-local
  $ echo end >> conflict-other

  $ "$PYTHON" simplemerge -p conflict-local base conflict-other
  base
  <<<<<<< conflict-local
  not other
  =======
  other
  >>>>>>> conflict-other
  end
  [1]

1 label

  $ "$PYTHON" simplemerge -p -L foo conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  =======
  other
  >>>>>>> conflict-other
  end
  [1]

2 labels

  $ "$PYTHON" simplemerge -p -L foo -L bar conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  =======
  other
  >>>>>>> bar
  end
  [1]

3 labels

  $ "$PYTHON" simplemerge -p -L foo -L bar -L base conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  end
  ||||||| base
  =======
  other
  end
  >>>>>>> bar
  [1]

too many labels

  $ "$PYTHON" simplemerge -p -L foo -L bar -L baz -L buz conflict-local base conflict-other
  abort: can only specify three labels.
  [255]

binary file

  $ "$PYTHON" -c "f = open('binary-local', 'w'); f.write('\x00'); f.close()"
  $ cat orig >> binary-local
  $ "$PYTHON" simplemerge -p binary-local base other
  warning: binary-local looks like a binary file.
  [1]

binary file --text

  $ "$PYTHON" simplemerge -a -p binary-local base other 2>&1
  warning: binary-local looks like a binary file.
  \x00local (esc)
  base
  other

help

  $ "$PYTHON" simplemerge --help
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  no effect (DEPRECATED)
   -h --help        display help and exit
   -q --quiet       suppress output

wrong number of arguments

  $ "$PYTHON" simplemerge
  simplemerge: wrong number of arguments
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  no effect (DEPRECATED)
   -h --help        display help and exit
   -q --quiet       suppress output
  [1]

bad option

  $ "$PYTHON" simplemerge --foo -p local base other
  simplemerge: option --foo not recognized
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  no effect (DEPRECATED)
   -h --help        display help and exit
   -q --quiet       suppress output
  [1]