view tests/test-convert-svn-move.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

#require svn svn-bindings

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > EOF

  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/move.svndump"
  $ SVNREPOPATH=`pwd`/svn-repo
  $ SVNREPOURL="`"$PYTHON" $TESTDIR/svnurlof.py \"$SVNREPOPATH\"`"

Convert trunk and branches

  $ hg convert --datesort "$SVNREPOURL"/subproject A-hg
  initializing destination A-hg repository
  scanning source...
  sorting...
  converting...
  13 createtrunk
  12 moved1
  11 moved1
  10 moved2
  9 changeb and rm d2
  8 changeb and rm d2
  7 moved1again
  6 moved1again
  5 copyfilefrompast
  4 copydirfrompast
  3 add d3
  2 copy dir and remove subdir
  1 add d4old
  0 rename d4old into d4new

  $ cd A-hg
  $ hg log -G --template '{rev} {desc|firstline} files: {files}\n'
  o  13 rename d4old into d4new files: d4new/g d4old/g
  |
  o  12 add d4old files: d4old/g
  |
  o  11 copy dir and remove subdir files: d3/d31/e d4/d31/e d4/f
  |
  o  10 add d3 files: d3/d31/e d3/f
  |
  o  9 copydirfrompast files: d2/d
  |
  o  8 copyfilefrompast files: d
  |
  o  7 moved1again files: d1/b d1/c
  |
  | o  6 moved1again files:
  | |
  o |  5 changeb and rm d2 files: d1/b d2/d
  | |
  | o  4 changeb and rm d2 files: b
  | |
  o |  3 moved2 files: d2/d
  | |
  o |  2 moved1 files: d1/b d1/c
  | |
  | o  1 moved1 files: b c
  |
  o  0 createtrunk files:
  

Check move copy records

  $ hg st --rev 12:13 --copies
  A d4new/g
    d4old/g
  R d4old/g

Check branches

  $ hg branches
  default                       13:* (glob)
  d1                             6:* (glob)
  $ cd ..

  $ mkdir test-replace
  $ cd test-replace
  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/replace.svndump"

Convert files being replaced by directories

  $ hg convert svn-repo hg-repo
  initializing destination hg-repo repository
  scanning source...
  sorting...
  converting...
  6 initial
  5 clobber symlink
  4 clobber1
  3 clobber2
  2 adddb
  1 clobberdir
  0 branch

  $ cd hg-repo

Manifest before

  $ hg -v manifest -r 1
  644   a
  644   d/b
  644   d2/a
  644 @ dlink
  644 @ dlink2
  644   dlink3

Manifest after clobber1

  $ hg -v manifest -r 2
  644   a/b
  644   d/b
  644   d2/a
  644   dlink/b
  644 @ dlink2
  644   dlink3

Manifest after clobber2

  $ hg -v manifest -r 3
  644   a/b
  644   d/b
  644   d2/a
  644   dlink/b
  644 @ dlink2
  644 @ dlink3

Manifest after clobberdir

  $ hg -v manifest -r 6
  644   a/b
  644   d/b
  644   d2/a
  644   d2/c
  644   dlink/b
  644 @ dlink2
  644 @ dlink3

Try updating

  $ hg up -qC default
  $ cd ..

Test convert progress bar

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > assume-tty = 1
  > delay = 0
  > changedelay = 0
  > format = topic bar number
  > refresh = 0
  > width = 60
  > EOF

  $ hg convert svn-repo hg-progress
  \r (no-eol) (esc)
  scanning [=====>                                      ] 1/7\r (no-eol) (esc)
  scanning [===========>                                ] 2/7\r (no-eol) (esc)
  scanning [=================>                          ] 3/7\r (no-eol) (esc)
  scanning [========================>                   ] 4/7\r (no-eol) (esc)
  scanning [==============================>             ] 5/7\r (no-eol) (esc)
  scanning [====================================>       ] 6/7\r (no-eol) (esc)
  scanning [===========================================>] 7/7\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [                                          ] 0/7\r (no-eol) (esc)
  getting files [=====>                                 ] 1/6\r (no-eol) (esc)
  getting files [============>                          ] 2/6\r (no-eol) (esc)
  getting files [==================>                    ] 3/6\r (no-eol) (esc)
  getting files [=========================>             ] 4/6\r (no-eol) (esc)
  getting files [===============================>       ] 5/6\r (no-eol) (esc)
  getting files [======================================>] 6/6\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=====>                                    ] 1/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===========>                              ] 2/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/2\r (no-eol) (esc)
  scanning paths [==================>                   ] 1/2\r (no-eol) (esc)
  getting files [========>                              ] 1/4\r (no-eol) (esc)
  getting files [==================>                    ] 2/4\r (no-eol) (esc)
  getting files [============================>          ] 3/4\r (no-eol) (esc)
  getting files [======================================>] 4/4\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=================>                        ] 3/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=======================>                  ] 4/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=============================>            ] 5/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [===>                                   ] 1/8\r (no-eol) (esc)
  getting files [========>                              ] 2/8\r (no-eol) (esc)
  getting files [=============>                         ] 3/8\r (no-eol) (esc)
  getting files [==================>                    ] 4/8\r (no-eol) (esc)
  getting files [=======================>               ] 5/8\r (no-eol) (esc)
  getting files [============================>          ] 6/8\r (no-eol) (esc)
  getting files [=================================>     ] 7/8\r (no-eol) (esc)
  getting files [======================================>] 8/8\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===================================>      ] 6/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/3\r (no-eol) (esc)
  scanning paths [===========>                          ] 1/3\r (no-eol) (esc)
  scanning paths [========================>             ] 2/3\r (no-eol) (esc)
  getting files [===>                                   ] 1/8\r (no-eol) (esc)
  getting files [========>                              ] 2/8\r (no-eol) (esc)
  getting files [=============>                         ] 3/8\r (no-eol) (esc)
  getting files [==================>                    ] 4/8\r (no-eol) (esc)
  getting files [=======================>               ] 5/8\r (no-eol) (esc)
  getting files [============================>          ] 6/8\r (no-eol) (esc)
  getting files [=================================>     ] 7/8\r (no-eol) (esc)
  getting files [======================================>] 8/8\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  initializing destination hg-progress repository
  scanning source...
  sorting...
  converting...
  6 initial
  5 clobber symlink
  4 clobber1
  3 clobber2
  2 adddb
  1 clobberdir
  0 branch

  $ cd ..