Mercurial > hg
view tests/test-convert-svn-sink.t @ 44363:f7459da77f23
nodemap: introduce an option to use mmap to read the nodemap mapping
The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.
This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).
Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:
Before:
* do not use the persistent nodemap
* use the CPython implementation of the index for nodemap
* use mmapping of the changelog index
After:
* use the MixedIndex Rust code, with the NodeTree object for nodemap access
(still in review)
* use the persistent nodemap data from disk
* access the persistent nodemap data through mmap
* use mmapping of the changelog index
The persistent nodemap greatly speed up most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.
Here are some numbers (in seconds) for the reference copy of mozilla-try:
Revset Before After abs-change speedup
-10000: 0.004622 0.005532 0.000910 × 0.83
-10: 0.000050 0.000132 0.000082 × 0.37
tip 0.000052 0.000085 0.000033 × 0.61
0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29
0 0.023521 0.000084 -0.023437 × 280.01
(-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37
(-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79
(-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55
:99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84
:9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68
:9 0.316450 0.000143 -0.316307 ×2212.93
On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.
Here are some numbers (in seconds) for the reference copy of mercurial:
Revset Before After abs-change speedup
-10: 0.000065 0.000097 0.000032 × 0.67
tip 0.000063 0.000078 0.000015 × 0.80
0 0.000561 0.000079 -0.000482 × 7.10
-10000: 0.004609 0.003648 -0.000961 × 1.26
0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35
(-10:) + :9 0.002187 0.000108 -0.002079 ×20.25
(-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68
(-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71
:9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96
:9 0.003854 0.000099 -0.003755 ×38.92
:99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02
Differential Revision: https://phab.mercurial-scm.org/D7894
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Tue, 11 Feb 2020 11:18:52 +0100 |
parents | 36ee0d6d64c5 |
children | 7525e77b5eac |
line wrap: on
line source
#require svn13 $ svnupanddisplay() > { > ( > cd $1; > svn up -q; > svn st -v | sed 's/ */ /g' | sort > limit='' > if [ $2 -gt 0 ]; then > limit="--limit=$2" > fi > svn log --xml -v $limit | "$PYTHON" "$TESTDIR/svnxml.py" > ) > } $ cat >> $HGRCPATH <<EOF > [extensions] > convert = > EOF $ hg init a Add $ echo a > a/a $ mkdir -p a/d1/d2 $ echo b > a/d1/d2/b $ hg --cwd a ci -d '0 0' -A -m 'add a file' adding a adding d1/d2/b Modify $ svn-safe-append.py a a/a $ hg --cwd a ci -d '1 0' -m 'modify a file' $ hg --cwd a tip -q 1:e0e2b8a9156b $ hg convert -d svn a assuming destination a-hg initializing svn repository 'a-hg' initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 1 add a file 0 modify a file $ svnupanddisplay a-hg-wc 2 2 1 test d1 2 1 test d1/d2 2 1 test d1/d2/b 2 2 test . 2 2 test a revision: 2 author: test msg: modify a file M /a revision: 1 author: test msg: add a file A /a A /d1 A /d1/d2 A /d1/d2/b $ ls a a-hg-wc a: a d1 a-hg-wc: a d1 $ cmp a/a a-hg-wc/a Rename $ hg --cwd a mv a b $ hg --cwd a ci -d '2 0' -m 'rename a file' $ hg --cwd a tip -q 2:eb5169441d43 $ hg convert -d svn a assuming destination a-hg initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 rename a file $ svnupanddisplay a-hg-wc 1 3 1 test d1 3 1 test d1/d2 3 1 test d1/d2/b 3 3 test . 3 3 test b revision: 3 author: test msg: rename a file D /a A /b (from /a@2) $ ls a a-hg-wc a: b d1 a-hg-wc: b d1 Copy $ hg --cwd a cp b c $ hg --cwd a ci -d '3 0' -m 'copy a file' $ hg --cwd a tip -q 3:60effef6ab48 $ hg convert -d svn a assuming destination a-hg initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 copy a file $ svnupanddisplay a-hg-wc 1 4 1 test d1 4 1 test d1/d2 4 1 test d1/d2/b 4 3 test b 4 4 test . 4 4 test c revision: 4 author: test msg: copy a file A /c (from /b@3) $ ls a a-hg-wc a: b c d1 a-hg-wc: b c d1 $ hg --cwd a rm b Remove $ hg --cwd a ci -d '4 0' -m 'remove a file' $ hg --cwd a tip -q 4:87bbe3013fb6 $ hg convert -d svn a assuming destination a-hg initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 remove a file $ svnupanddisplay a-hg-wc 1 5 1 test d1 5 1 test d1/d2 5 1 test d1/d2/b 5 4 test c 5 5 test . revision: 5 author: test msg: remove a file D /b $ ls a a-hg-wc a: c d1 a-hg-wc: c d1 Executable #if execbit $ chmod +x a/c #else $ echo fake >> a/c #endif $ hg --cwd a ci -d '5 0' -m 'make a file executable' #if execbit $ hg --cwd a tip -q 5:ff42e473c340 #else $ hg --cwd a tip -q 5:817a700c8cf1 #endif $ hg convert -d svn a assuming destination a-hg initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 make a file executable $ svnupanddisplay a-hg-wc 1 6 1 test d1 6 1 test d1/d2 6 1 test d1/d2/b 6 6 test . 6 6 test c revision: 6 author: test msg: make a file executable M /c #if execbit $ test -x a-hg-wc/c #endif #if symlink Symlinks $ ln -s a/missing a/link $ hg --cwd a commit -Am 'add symlink' adding link $ hg --cwd a mv link newlink $ hg --cwd a commit -m 'move symlink' $ hg convert -d svn a a-svnlink initializing svn repository 'a-svnlink' initializing svn working copy 'a-svnlink-wc' scanning source... sorting... converting... 7 add a file 6 modify a file 5 rename a file 4 copy a file 3 remove a file 2 make a file executable 1 add symlink 0 move symlink $ svnupanddisplay a-svnlink-wc 1 8 1 test d1 8 1 test d1/d2 8 1 test d1/d2/b 8 6 test c 8 8 test . 8 8 test newlink revision: 8 author: test msg: move symlink D /link A /newlink (from /link@7) Make sure our changes don't affect the rest of the test cases $ hg --cwd a up 5 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ hg --cwd a --config extensions.strip= strip -r 6 saved backup bundle to $TESTTMP/a/.hg/strip-backup/bd4f7b7a7067-ed505e42-backup.hg #endif Convert with --full adds and removes files that didn't change $ touch a/f $ hg -R a ci -Aqmf $ echo "rename c d" > filemap $ hg convert -d svn a --filemap filemap --full assuming destination a-hg initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 f $ svnupanddisplay a-hg-wc 1 7 7 test . 7 7 test d 7 7 test f revision: 7 author: test msg: f D /c A /d D /d1 A /f $ rm -rf a a-hg a-hg-wc Executable in new directory $ hg init a $ mkdir a/d1 $ echo a > a/d1/a #if execbit $ chmod +x a/d1/a #else $ echo fake >> a/d1/a #endif $ hg --cwd a ci -d '0 0' -A -m 'add executable file in new directory' adding d1/a $ hg convert -d svn a assuming destination a-hg initializing svn repository 'a-hg' initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 add executable file in new directory $ svnupanddisplay a-hg-wc 1 1 1 test . 1 1 test d1 1 1 test d1/a revision: 1 author: test msg: add executable file in new directory A /d1 A /d1/a #if execbit $ test -x a-hg-wc/d1/a #endif Copy to new directory $ mkdir a/d2 $ hg --cwd a cp d1/a d2/a $ hg --cwd a ci -d '1 0' -A -m 'copy file to new directory' $ hg convert -d svn a assuming destination a-hg initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 0 copy file to new directory $ svnupanddisplay a-hg-wc 1 2 1 test d1 2 1 test d1/a 2 2 test . 2 2 test d2 2 2 test d2/a revision: 2 author: test msg: copy file to new directory A /d2 A /d2/a (from /d1/a@1) Branchy history $ hg init b $ echo base > b/b $ hg --cwd b ci -d '0 0' -Ambase adding b $ svn-safe-append.py left-1 b/b $ echo left-1 > b/left-1 $ hg --cwd b ci -d '1 0' -Amleft-1 adding left-1 $ svn-safe-append.py left-2 b/b $ echo left-2 > b/left-2 $ hg --cwd b ci -d '2 0' -Amleft-2 adding left-2 $ hg --cwd b up 0 1 files updated, 0 files merged, 2 files removed, 0 files unresolved $ svn-safe-append.py right-1 b/b $ echo right-1 > b/right-1 $ hg --cwd b ci -d '3 0' -Amright-1 adding right-1 created new head $ svn-safe-append.py right-2 b/b $ echo right-2 > b/right-2 $ hg --cwd b ci -d '4 0' -Amright-2 adding right-2 $ hg --cwd b up -C 2 3 files updated, 0 files merged, 2 files removed, 0 files unresolved $ hg --cwd b merge merging b warning: conflicts while merging b! (edit, then use 'hg resolve --mark') 2 files updated, 0 files merged, 0 files removed, 1 files unresolved use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon [1] $ hg --cwd b revert -r 2 b $ hg --cwd b resolve -m b (no more unresolved files) $ hg --cwd b ci -d '5 0' -m 'merge' Expect 4 changes $ hg convert -d svn b assuming destination b-hg initializing svn repository 'b-hg' initializing svn working copy 'b-hg-wc' scanning source... sorting... converting... 5 base 4 left-1 3 left-2 2 right-1 1 right-2 0 merge $ svnupanddisplay b-hg-wc 0 4 2 test left-1 4 3 test b 4 3 test left-2 4 4 test . 4 4 test right-1 4 4 test right-2 revision: 4 author: test msg: merge A /right-1 A /right-2 revision: 3 author: test msg: left-2 M /b A /left-2 revision: 2 author: test msg: left-1 M /b A /left-1 revision: 1 author: test msg: base A /b Tags are not supported, but must not break conversion $ rm -rf a a-hg a-hg-wc $ hg init a $ echo a > a/a $ hg --cwd a ci -d '0 0' -A -m 'Add file a' adding a $ hg --cwd a tag -d '1 0' -m 'Tagged as v1.0' v1.0 $ hg convert -d svn a assuming destination a-hg initializing svn repository 'a-hg' initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 1 Add file a 0 Tagged as v1.0 writing Subversion tags is not yet implemented $ svnupanddisplay a-hg-wc 2 2 1 test a 2 2 test . 2 2 test .hgtags revision: 2 author: test msg: Tagged as v1.0 A /.hgtags revision: 1 author: test msg: Add file a A /a $ rm -rf a a-hg a-hg-wc #if execbit Executable bit removal $ hg init a $ echo a > a/exec $ chmod +x a/exec $ hg --cwd a ci -d '1 0' -A -m 'create executable' adding exec $ chmod -x a/exec $ hg --cwd a ci -d '2 0' -A -m 'remove executable bit' $ hg convert -d svn a assuming destination a-hg initializing svn repository 'a-hg' initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 1 create executable 0 remove executable bit $ svnupanddisplay a-hg-wc 0 2 2 test . 2 2 test exec revision: 2 author: test msg: remove executable bit M /exec revision: 1 author: test msg: create executable A /exec $ test ! -x a-hg-wc/exec $ rm -rf a a-hg a-hg-wc #endif Skipping empty commits $ hg init a $ hg --cwd a --config ui.allowemptycommit=True ci -d '1 0' -m 'Initial empty commit' $ echo a > a/a $ hg --cwd a ci -d '0 0' -A -m 'Some change' adding a $ hg --cwd a --config ui.allowemptycommit=True ci -d '2 0' -m 'Empty commit 1' $ hg --cwd a --config ui.allowemptycommit=True ci -d '3 0' -m 'Empty commit 2' $ echo b > a/b $ hg --cwd a ci -d '0 0' -A -m 'Another change' adding b $ hg convert -d svn a assuming destination a-hg initializing svn repository 'a-hg' initializing svn working copy 'a-hg-wc' scanning source... sorting... converting... 4 Initial empty commit 3 Some change 2 Empty commit 1 1 Empty commit 2 0 Another change $ svnupanddisplay a-hg-wc 0 2 1 test a 2 2 test . 2 2 test b revision: 2 author: test msg: Another change A /b revision: 1 author: test msg: Some change A /a $ rm -rf a a-hg a-hg-wc