view tests/test-default-push.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

  $ hg init a

  $ echo a > a/a
  $ hg --cwd a ci -Ama
  adding a

  $ hg clone a c
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone a b
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ echo b >> b/a
  $ hg --cwd b ci -mb

Push should provide a hint when both 'default' and 'default-push' not set:
  $ cd c
  $ hg push --config paths.default=
  abort: default repository not configured!
  (see 'hg help config.paths')
  [255]

  $ cd ..

Push should push to 'default' when 'default-push' not set:

  $ hg --cwd b push
  pushing to $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

Push should push to 'default-push' when set:

  $ echo '[paths]' >> b/.hg/hgrc
  $ echo 'default-push = ../c' >> b/.hg/hgrc
  $ hg --cwd b push
  pushing to $TESTTMP/c
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

But push should push to 'default' if explicitly specified (issue5000):

  $ hg --cwd b push default
  pushing to $TESTTMP/a
  searching for changes
  no changes found
  [1]

Push should push to 'default-push' when 'default' is not set

  $ hg -q clone a push-default-only
  $ cd push-default-only
  $ rm .hg/hgrc

  $ touch foo
  $ hg -q commit -A -m 'add foo'
  $ hg --config paths.default-push=../a push
  pushing to $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

  $ cd ..

Pushing to a path that isn't defined should not fall back to default

  $ hg --cwd b push doesnotexist
  abort: repository doesnotexist does not exist!
  [255]

:pushurl is used when defined

  $ hg -q clone a pushurlsource
  $ hg -q clone a pushurldest
  $ cd pushurlsource

Windows needs a leading slash to make a URL that passes all of the checks
  $ WD=`pwd`
#if windows
  $ WD="/$WD"
#endif
  $ cat > .hg/hgrc << EOF
  > [paths]
  > default = https://example.com/not/relevant
  > default:pushurl = file://$WD/../pushurldest
  > EOF

  $ touch pushurl
  $ hg -q commit -A -m 'add pushurl'
  $ hg push
  pushing to file:/*/$TESTTMP/pushurlsource/../pushurldest (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

:pushrev is used when no -r is passed

  $ cat >> .hg/hgrc << EOF
  > default:pushrev = .
  > EOF
  $ hg -q up -r 0
  $ echo head1 > foo
  $ hg -q commit -A -m head1
  $ hg -q up -r 0
  $ echo head2 > foo
  $ hg -q commit -A -m head2
  $ hg push -f
  pushing to file:/*/$TESTTMP/pushurlsource/../pushurldest (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)

  $ hg --config 'paths.default:pushrev=draft()' push -f
  pushing to file:/*/$TESTTMP/pushurlsource/../pushurldest (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)

Invalid :pushrev raises appropriately

  $ hg --config 'paths.default:pushrev=notdefined()' push
  pushing to file:/*/$TESTTMP/pushurlsource/../pushurldest (glob)
  hg: parse error: unknown identifier: notdefined
  [255]

  $ hg --config 'paths.default:pushrev=(' push
  pushing to file:/*/$TESTTMP/pushurlsource/../pushurldest (glob)
  hg: parse error at 1: not a prefix: end
  ((
    ^ here)
  [255]

  $ cd ..