view tests/test-diff-change.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

Testing diff --change

  $ hg init a
  $ cd a

  $ echo "first" > file.txt
  $ hg add file.txt
  $ hg commit -m 'first commit' # 0

  $ echo "second" > file.txt
  $ hg commit -m 'second commit' # 1

  $ echo "third" > file.txt
  $ hg commit -m 'third commit' # 2

  $ hg diff --nodates --change 1
  diff -r 4bb65dda5db4 -r e9b286083166 file.txt
  --- a/file.txt
  +++ b/file.txt
  @@ -1,1 +1,1 @@
  -first
  +second

  $ hg diff --change e9b286083166
  diff -r 4bb65dda5db4 -r e9b286083166 file.txt
  --- a/file.txt	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file.txt	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,1 +1,1 @@
  -first
  +second

  $ cd ..

Test dumb revspecs: top-level "x:y", "x:", ":y" and ":" ranges should be handled
as pairs even if x == y, but not for "f(x:y)" nor "x::y" (issue3474, issue4774)

  $ hg clone -q a dumbspec
  $ cd dumbspec
  $ echo "wdir" > file.txt

  $ hg diff -r 2:2
  $ hg diff -r 2:.
  $ hg diff -r 2:
  $ hg diff -r :0
  $ hg diff -r '2:first(2:2)'
  $ hg diff -r 'first(2:2)' --nodates
  diff -r bf5ff72eb7e0 file.txt
  --- a/file.txt
  +++ b/file.txt
  @@ -1,1 +1,1 @@
  -third
  +wdir
  $ hg diff -r '(2:2)' --nodates
  diff -r bf5ff72eb7e0 file.txt
  --- a/file.txt
  +++ b/file.txt
  @@ -1,1 +1,1 @@
  -third
  +wdir
  $ hg diff -r 2::2 --nodates
  diff -r bf5ff72eb7e0 file.txt
  --- a/file.txt
  +++ b/file.txt
  @@ -1,1 +1,1 @@
  -third
  +wdir
  $ hg diff -r "2 and 1"
  abort: empty revision range
  [255]

  $ cd ..

  $ hg clone -qr0 a dumbspec-rev0
  $ cd dumbspec-rev0
  $ echo "wdir" > file.txt

  $ hg diff -r :
  $ hg diff -r 'first(:)' --nodates
  diff -r 4bb65dda5db4 file.txt
  --- a/file.txt
  +++ b/file.txt
  @@ -1,1 +1,1 @@
  -first
  +wdir

  $ cd ..

Testing diff --change when merge:

  $ cd a

  $ for i in 1 2 3 4 5 6 7 8 9 10; do
  >    echo $i >> file.txt
  > done
  $ hg commit -m "lots of text" # 3

  $ sed -e 's,^2$,x,' file.txt > file.txt.tmp
  $ mv file.txt.tmp file.txt
  $ hg commit -m "change 2 to x" # 4

  $ hg up -r 3
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ sed -e 's,^8$,y,' file.txt > file.txt.tmp
  $ mv file.txt.tmp file.txt
  $ hg commit -m "change 8 to y"
  created new head

  $ hg up -C -r 4
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg merge -r 5
  merging file.txt
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg commit -m "merge 8 to y" # 6

  $ hg diff --change 5
  diff -r ae119d680c82 -r 9085c5c02e52 file.txt
  --- a/file.txt	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file.txt	Thu Jan 01 00:00:00 1970 +0000
  @@ -6,6 +6,6 @@
   5
   6
   7
  -8
  +y
   9
   10

must be similar to 'hg diff --change 5':

  $ hg diff -c 6
  diff -r 273b50f17c6d -r 979ca961fd2e file.txt
  --- a/file.txt	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file.txt	Thu Jan 01 00:00:00 1970 +0000
  @@ -6,6 +6,6 @@
   5
   6
   7
  -8
  +y
   9
   10

  $ cd ..