view tests/test-diff-color.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

Setup

  $ cat <<EOF >> $HGRCPATH
  > [ui]
  > color = yes
  > formatted = always
  > paginate = never
  > [color]
  > mode = ansi
  > EOF
  $ hg init repo
  $ cd repo
  $ cat > a <<EOF
  > c
  > c
  > a
  > a
  > b
  > a
  > a
  > c
  > c
  > EOF
  $ hg ci -Am adda
  \x1b[0;32madding a\x1b[0m (esc)
  $ cat > a <<EOF
  > c
  > c
  > a
  > a
  > dd
  > a
  > a
  > c
  > c
  > EOF

default context

  $ hg diff --nodates
  \x1b[0;1mdiff -r cf9f4ba66af2 a\x1b[0m (esc)
  \x1b[0;31;1m--- a/a\x1b[0m (esc)
  \x1b[0;32;1m+++ b/a\x1b[0m (esc)
  \x1b[0;35m@@ -2,7 +2,7 @@\x1b[0m (esc)
   c
   a
   a
  \x1b[0;31m-b\x1b[0m (esc)
  \x1b[0;32m+dd\x1b[0m (esc)
   a
   a
   c

trailing whitespace

  $ cp a a.orig
  >>> with open('a', 'rb') as f:
  ...     data = f.read()
  >>> with open('a', 'wb') as f:
  ...     f.write(data.replace(b'dd', b'dd \r')) and None
  $ hg diff --nodates
  \x1b[0;1mdiff -r cf9f4ba66af2 a\x1b[0m (esc)
  \x1b[0;31;1m--- a/a\x1b[0m (esc)
  \x1b[0;32;1m+++ b/a\x1b[0m (esc)
  \x1b[0;35m@@ -2,7 +2,7 @@\x1b[0m (esc)
   c
   a
   a
  \x1b[0;31m-b\x1b[0m (esc)
  \x1b[0;32m+dd\x1b[0m\x1b[0;1;41m \x1b[0m\r (esc)
   a
   a
   c

  $ mv a.orig a

(check that 'ui.color=yes' match '--color=auto')

  $ hg diff --nodates --config ui.formatted=no
  diff -r cf9f4ba66af2 a
  --- a/a
  +++ b/a
  @@ -2,7 +2,7 @@
   c
   a
   a
  -b
  +dd
   a
   a
   c

(check that 'ui.color=no' disable color)

  $ hg diff --nodates --config ui.formatted=yes --config ui.color=no
  diff -r cf9f4ba66af2 a
  --- a/a
  +++ b/a
  @@ -2,7 +2,7 @@
   c
   a
   a
  -b
  +dd
   a
   a
   c

(check that 'ui.color=always' force color)

  $ hg diff --nodates --config ui.formatted=no --config ui.color=always
  \x1b[0;1mdiff -r cf9f4ba66af2 a\x1b[0m (esc)
  \x1b[0;31;1m--- a/a\x1b[0m (esc)
  \x1b[0;32;1m+++ b/a\x1b[0m (esc)
  \x1b[0;35m@@ -2,7 +2,7 @@\x1b[0m (esc)
   c
   a
   a
  \x1b[0;31m-b\x1b[0m (esc)
  \x1b[0;32m+dd\x1b[0m (esc)
   a
   a
   c

--unified=2

  $ hg diff --nodates -U 2
  \x1b[0;1mdiff -r cf9f4ba66af2 a\x1b[0m (esc)
  \x1b[0;31;1m--- a/a\x1b[0m (esc)
  \x1b[0;32;1m+++ b/a\x1b[0m (esc)
  \x1b[0;35m@@ -3,5 +3,5 @@\x1b[0m (esc)
   a
   a
  \x1b[0;31m-b\x1b[0m (esc)
  \x1b[0;32m+dd\x1b[0m (esc)
   a
   a

diffstat

  $ hg diff --stat
   a |  2 \x1b[0;32m+\x1b[0m\x1b[0;31m-\x1b[0m (esc)
   1 files changed, 1 insertions(+), 1 deletions(-)
  $ cat <<EOF >> $HGRCPATH
  > [extensions]
  > record =
  > [ui]
  > interactive = true
  > [diff]
  > git = True
  > EOF

#if execbit

record

  $ chmod +x a
  $ hg record -m moda a <<EOF
  > y
  > EOF
  \x1b[0;1mdiff --git a/a b/a\x1b[0m (esc)
  \x1b[0;36;1mold mode 100644\x1b[0m (esc)
  \x1b[0;36;1mnew mode 100755\x1b[0m (esc)
  1 hunks, 1 lines changed
  \x1b[0;35m@@ -2,7 +2,7 @@ c\x1b[0m (esc)
   c
   a
   a
  \x1b[0;31m-b\x1b[0m (esc)
  \x1b[0;32m+dd\x1b[0m (esc)
   a
   a
   c
  \x1b[0;33mrecord this change to 'a'?\x1b[0m (esc)
  \x1b[0;33m(enter ? for help) [Ynesfdaq?]\x1b[0m y (esc)
  

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH
  $ hg rollback
  repository tip rolled back to revision 0 (undo commit)
  working directory now based on revision 0

qrecord

  $ hg qrecord -m moda patch <<EOF
  > y
  > y
  > EOF
  \x1b[0;1mdiff --git a/a b/a\x1b[0m (esc)
  \x1b[0;36;1mold mode 100644\x1b[0m (esc)
  \x1b[0;36;1mnew mode 100755\x1b[0m (esc)
  1 hunks, 1 lines changed
  \x1b[0;33mexamine changes to 'a'?\x1b[0m (esc)
  \x1b[0;33m(enter ? for help) [Ynesfdaq?]\x1b[0m y (esc)
  
  \x1b[0;35m@@ -2,7 +2,7 @@ c\x1b[0m (esc)
   c
   a
   a
  \x1b[0;31m-b\x1b[0m (esc)
  \x1b[0;32m+dd\x1b[0m (esc)
   a
   a
   c
  \x1b[0;33mrecord this change to 'a'?\x1b[0m (esc)
  \x1b[0;33m(enter ? for help) [Ynesfdaq?]\x1b[0m y (esc)
  

  $ hg qpop -a
  popping patch
  patch queue now empty

#endif

issue3712: test colorization of subrepo diff

  $ hg init sub
  $ echo b > sub/b
  $ hg -R sub commit -Am 'create sub'
  \x1b[0;32madding b\x1b[0m (esc)
  $ echo 'sub = sub' > .hgsub
  $ hg add .hgsub
  $ hg commit -m 'add subrepo sub'
  $ echo aa >> a
  $ echo bb >> sub/b

  $ hg diff -S
  \x1b[0;1mdiff --git a/a b/a\x1b[0m (esc)
  \x1b[0;31;1m--- a/a\x1b[0m (esc)
  \x1b[0;32;1m+++ b/a\x1b[0m (esc)
  \x1b[0;35m@@ -7,3 +7,4 @@\x1b[0m (esc)
   a
   c
   c
  \x1b[0;32m+aa\x1b[0m (esc)
  \x1b[0;1mdiff --git a/sub/b b/sub/b\x1b[0m (esc)
  \x1b[0;31;1m--- a/sub/b\x1b[0m (esc)
  \x1b[0;32;1m+++ b/sub/b\x1b[0m (esc)
  \x1b[0;35m@@ -1,1 +1,2 @@\x1b[0m (esc)
   b
  \x1b[0;32m+bb\x1b[0m (esc)

test tabs

  $ cat >> a <<EOF
  > 	one tab
  > 		two tabs
  > end tab	
  > mid	tab
  > 	all		tabs	
  > EOF
  $ hg diff --nodates
  \x1b[0;1mdiff --git a/a b/a\x1b[0m (esc)
  \x1b[0;31;1m--- a/a\x1b[0m (esc)
  \x1b[0;32;1m+++ b/a\x1b[0m (esc)
  \x1b[0;35m@@ -7,3 +7,9 @@\x1b[0m (esc)
   a
   c
   c
  \x1b[0;32m+aa\x1b[0m (esc)
  \x1b[0;32m+\x1b[0m	\x1b[0;32mone tab\x1b[0m (esc)
  \x1b[0;32m+\x1b[0m		\x1b[0;32mtwo tabs\x1b[0m (esc)
  \x1b[0;32m+end tab\x1b[0m\x1b[0;1;41m	\x1b[0m (esc)
  \x1b[0;32m+mid\x1b[0m	\x1b[0;32mtab\x1b[0m (esc)
  \x1b[0;32m+\x1b[0m	\x1b[0;32mall\x1b[0m		\x1b[0;32mtabs\x1b[0m\x1b[0;1;41m	\x1b[0m (esc)
  $ echo "[color]" >> $HGRCPATH
  $ echo "diff.tab = bold magenta" >> $HGRCPATH
  $ hg diff --nodates
  \x1b[0;1mdiff --git a/a b/a\x1b[0m (esc)
  \x1b[0;31;1m--- a/a\x1b[0m (esc)
  \x1b[0;32;1m+++ b/a\x1b[0m (esc)
  \x1b[0;35m@@ -7,3 +7,9 @@\x1b[0m (esc)
   a
   c
   c
  \x1b[0;32m+aa\x1b[0m (esc)
  \x1b[0;32m+\x1b[0m\x1b[0;1;35m	\x1b[0m\x1b[0;32mone tab\x1b[0m (esc)
  \x1b[0;32m+\x1b[0m\x1b[0;1;35m		\x1b[0m\x1b[0;32mtwo tabs\x1b[0m (esc)
  \x1b[0;32m+end tab\x1b[0m\x1b[0;1;41m	\x1b[0m (esc)
  \x1b[0;32m+mid\x1b[0m\x1b[0;1;35m	\x1b[0m\x1b[0;32mtab\x1b[0m (esc)
  \x1b[0;32m+\x1b[0m\x1b[0;1;35m	\x1b[0m\x1b[0;32mall\x1b[0m\x1b[0;1;35m		\x1b[0m\x1b[0;32mtabs\x1b[0m\x1b[0;1;41m	\x1b[0m (esc)

  $ cd ..

test inline color diff

  $ hg init inline
  $ cd inline
  $ cat > file1 << EOF
  > this is the first line
  > this is the second line
  >     third line starts with space
  > + starts with a plus sign
  > 	this one with one tab
  > 		now with full two tabs
  > 	now tabs		everywhere, much fun
  > 
  > this line won't change
  > 
  > two lines are going to
  > be changed into three!
  > 
  > three of those lines will
  > collapse onto one
  > (to see if it works)
  > EOF
  $ hg add file1
  $ hg ci -m 'commit'

  $ cat > file1 << EOF
  > that is the first paragraph
  >     this is the second line
  > third line starts with space
  > - starts with a minus sign
  > 	this one with two tab
  > 			now with full three tabs
  > 	now there are tabs		everywhere, much fun
  > 
  > this line won't change
  > 
  > two lines are going to
  > (entirely magically,
  >  assuming this works)
  > be changed into four!
  > 
  > three of those lines have
  > collapsed onto one
  > EOF
  $ hg diff --config diff.word-diff=False --color=debug
  [diff.diffline|diff --git a/file1 b/file1]
  [diff.file_a|--- a/file1]
  [diff.file_b|+++ b/file1]
  [diff.hunk|@@ -1,16 +1,17 @@]
  [diff.deleted|-this is the first line]
  [diff.deleted|-this is the second line]
  [diff.deleted|-    third line starts with space]
  [diff.deleted|-+ starts with a plus sign]
  [diff.deleted|-][diff.tab|	][diff.deleted|this one with one tab]
  [diff.deleted|-][diff.tab|		][diff.deleted|now with full two tabs]
  [diff.deleted|-][diff.tab|	][diff.deleted|now tabs][diff.tab|		][diff.deleted|everywhere, much fun]
  [diff.inserted|+that is the first paragraph]
  [diff.inserted|+    this is the second line]
  [diff.inserted|+third line starts with space]
  [diff.inserted|+- starts with a minus sign]
  [diff.inserted|+][diff.tab|	][diff.inserted|this one with two tab]
  [diff.inserted|+][diff.tab|			][diff.inserted|now with full three tabs]
  [diff.inserted|+][diff.tab|	][diff.inserted|now there are tabs][diff.tab|		][diff.inserted|everywhere, much fun]
   
   this line won't change
   
   two lines are going to
  [diff.deleted|-be changed into three!]
  [diff.inserted|+(entirely magically,]
  [diff.inserted|+ assuming this works)]
  [diff.inserted|+be changed into four!]
   
  [diff.deleted|-three of those lines will]
  [diff.deleted|-collapse onto one]
  [diff.deleted|-(to see if it works)]
  [diff.inserted|+three of those lines have]
  [diff.inserted|+collapsed onto one]
  $ hg diff --config diff.word-diff=True --color=debug
  [diff.diffline|diff --git a/file1 b/file1]
  [diff.file_a|--- a/file1]
  [diff.file_b|+++ b/file1]
  [diff.hunk|@@ -1,16 +1,17 @@]
  [diff.deleted|-][diff.deleted.changed|this][diff.deleted.unchanged| is the first ][diff.deleted.changed|line]
  [diff.deleted|-][diff.deleted.unchanged|this is the second line]
  [diff.deleted|-][diff.deleted.changed|    ][diff.deleted.unchanged|third line starts with space]
  [diff.deleted|-][diff.deleted.changed|+][diff.deleted.unchanged| starts with a ][diff.deleted.changed|plus][diff.deleted.unchanged| sign]
  [diff.deleted|-][diff.tab|	][diff.deleted.unchanged|this one with ][diff.deleted.changed|one][diff.deleted.unchanged| tab]
  [diff.deleted|-][diff.tab|		][diff.deleted.unchanged|now with full ][diff.deleted.changed|two][diff.deleted.unchanged| tabs]
  [diff.deleted|-][diff.tab|	][diff.deleted.unchanged|now ][diff.deleted.unchanged|tabs][diff.tab|		][diff.deleted.unchanged|everywhere, much fun]
  [diff.inserted|+][diff.inserted.changed|that][diff.inserted.unchanged| is the first ][diff.inserted.changed|paragraph]
  [diff.inserted|+][diff.inserted.changed|    ][diff.inserted.unchanged|this is the second line]
  [diff.inserted|+][diff.inserted.unchanged|third line starts with space]
  [diff.inserted|+][diff.inserted.changed|-][diff.inserted.unchanged| starts with a ][diff.inserted.changed|minus][diff.inserted.unchanged| sign]
  [diff.inserted|+][diff.tab|	][diff.inserted.unchanged|this one with ][diff.inserted.changed|two][diff.inserted.unchanged| tab]
  [diff.inserted|+][diff.tab|			][diff.inserted.unchanged|now with full ][diff.inserted.changed|three][diff.inserted.unchanged| tabs]
  [diff.inserted|+][diff.tab|	][diff.inserted.unchanged|now ][diff.inserted.changed|there are ][diff.inserted.unchanged|tabs][diff.tab|		][diff.inserted.unchanged|everywhere, much fun]
   
   this line won't change
   
   two lines are going to
  [diff.deleted|-][diff.deleted.unchanged|be changed into ][diff.deleted.changed|three][diff.deleted.unchanged|!]
  [diff.inserted|+][diff.inserted.changed|(entirely magically,]
  [diff.inserted|+][diff.inserted.changed| assuming this works)]
  [diff.inserted|+][diff.inserted.unchanged|be changed into ][diff.inserted.changed|four][diff.inserted.unchanged|!]
   
  [diff.deleted|-][diff.deleted.unchanged|three of those lines ][diff.deleted.changed|will]
  [diff.deleted|-][diff.deleted.changed|collapse][diff.deleted.unchanged| onto one]
  [diff.deleted|-][diff.deleted.changed|(to see if it works)]
  [diff.inserted|+][diff.inserted.unchanged|three of those lines ][diff.inserted.changed|have]
  [diff.inserted|+][diff.inserted.changed|collapsed][diff.inserted.unchanged| onto one]

multibyte character shouldn't be broken up in word diff:

  $ "$PYTHON" <<'EOF'
  > with open("utf8", "wb") as f:
  >     f.write(b"blah \xe3\x82\xa2 blah\n")
  > EOF
  $ hg ci -Am 'add utf8 char' utf8
  $ "$PYTHON" <<'EOF'
  > with open("utf8", "wb") as f:
  >     f.write(b"blah \xe3\x82\xa4 blah\n")
  > EOF
  $ hg ci -m 'slightly change utf8 char' utf8

  $ hg diff --config diff.word-diff=True --color=debug -c.
  [diff.diffline|diff --git a/utf8 b/utf8]
  [diff.file_a|--- a/utf8]
  [diff.file_b|+++ b/utf8]
  [diff.hunk|@@ -1,1 +1,1 @@]
  [diff.deleted|-][diff.deleted.unchanged|blah ][diff.deleted.changed|\xe3\x82\xa2][diff.deleted.unchanged| blah] (esc)
  [diff.inserted|+][diff.inserted.unchanged|blah ][diff.inserted.changed|\xe3\x82\xa4][diff.inserted.unchanged| blah] (esc)