view tests/test-histedit-no-change.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

test for old histedit issue #6:
editing a changeset without any actual change would corrupt the repository

  $ . "$TESTDIR/histedit-helpers.sh"

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > histedit=
  > EOF

  $ initrepo ()
  > {
  >     dir="$1"
  >     comment="$2"
  >     if [ -n "${comment}" ]; then
  >         echo % ${comment}
  >         echo % ${comment} | sed 's:.:-:g'
  >     fi
  >     hg init ${dir}
  >     cd ${dir}
  >     for x in a b c d e f ; do
  >         echo $x > $x
  >         hg add $x
  >         hg ci -m $x
  >     done
  >     cd ..
  > }

  $ geneditor ()
  > {
  >     # generate an editor script for selecting changesets to be edited
  >     choice=$1  # changesets that should be edited (using sed line ranges)
  >     cat <<EOF | sed 's:^....::'
  >     # editing the rules, replacing 'pick' with 'edit' for the chosen lines
  >     sed '${choice}s:^pick:edit:' "\$1" > "\${1}.tmp"
  >     mv "\${1}.tmp" "\$1"
  >     # displaying the resulting rules, minus comments and empty lines
  >     sed '/^#/d;/^$/d;s:^:| :' "\$1" >&2
  > EOF
  > }

  $ startediting ()
  > {
  >     # begin an editing session
  >     choice="$1"  # changesets that should be edited
  >     number="$2"  # number of changesets considered (from tip)
  >     comment="$3"
  >     geneditor "${choice}" > edit.sh
  >     echo % start editing the history ${comment}
  >     HGEDITOR="sh ./edit.sh" hg histedit -- -${number} 2>&1 | fixbundle
  > }

  $ continueediting ()
  > {
  >     # continue an edit already in progress
  >     editor="$1"  # message editor when finalizing editing
  >     comment="$2"
  >     echo % finalize changeset editing ${comment}
  >     HGEDITOR=${editor} hg histedit --continue 2>&1 | fixbundle
  > }

  $ graphlog ()
  > {
  >     comment="${1:-log}"
  >     echo % "${comment}"
  >     hg log -G --template '{rev} {node} \"{desc|firstline}\"\n'
  > }


  $ initrepo r1 "test editing with no change"
  % test editing with no change
  -----------------------------
  $ cd r1
  $ graphlog "log before editing"
  % log before editing
  @  5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
  |
  o  4 e860deea161a2f77de56603b340ebbb4536308ae "e"
  |
  o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  o  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  
  $ startediting 2 3 "(not changing anything)" # edit the 2nd of 3 changesets
  % start editing the history (not changing anything)
  | pick 055a42cdd887 3 d
  | edit e860deea161a 4 e
  | pick 652413bf663e 5 f
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  Editing (e860deea161a), you may commit or record as needed now.
  (hg histedit --continue to resume)
  $ continueediting true "(leaving commit message unaltered)"
  % finalize changeset editing (leaving commit message unaltered)


check state of working copy
  $ hg id
  794fe033d0a0 tip

  $ graphlog "log after history editing"
  % log after history editing
  @  5 794fe033d0a030f8df77c5de945fca35c9181c30 "f"
  |
  o  4 04d2fab980779f332dec458cc944f28de8b43435 "e"
  |
  o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  o  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  

  $ cd ..

  $ initrepo r2 "test editing with no change, then abort"
  % test editing with no change, then abort
  -----------------------------------------
  $ cd r2
  $ graphlog "log before editing"
  % log before editing
  @  5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
  |
  o  4 e860deea161a2f77de56603b340ebbb4536308ae "e"
  |
  o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  o  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  
  $ startediting 1,2 3 "(not changing anything)" # edit the 1st two of 3 changesets
  % start editing the history (not changing anything)
  | edit 055a42cdd887 3 d
  | edit e860deea161a 4 e
  | pick 652413bf663e 5 f
  0 files updated, 0 files merged, 3 files removed, 0 files unresolved
  Editing (055a42cdd887), you may commit or record as needed now.
  (hg histedit --continue to resume)
  $ continueediting true "(leaving commit message unaltered)"
  % finalize changeset editing (leaving commit message unaltered)
  Editing (e860deea161a), you may commit or record as needed now.
  (hg histedit --continue to resume)
  $ graphlog "log after first edit"
  % log after first edit
  @  6 e5ae3ca2f1ffdbd89ec41ebc273a231f7c3022f2 "d"
  |
  | o  5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
  | |
  | o  4 e860deea161a2f77de56603b340ebbb4536308ae "e"
  | |
  | o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |/
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  o  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  

abort editing session, after first forcibly updating away
  $ hg up 0
  abort: histedit in progress
  (use 'hg histedit --continue' or 'hg histedit --abort')
  [255]
  $ mv .hg/histedit-state .hg/histedit-state-ignore
  $ hg up 0
  0 files updated, 0 files merged, 3 files removed, 0 files unresolved
  $ mv .hg/histedit-state-ignore .hg/histedit-state
  $ hg sum
  parent: 0:cb9a9f314b8b 
   a
  branch: default
  commit: 1 added, 1 unknown (new branch head)
  update: 6 new changesets (update)
  phases: 7 draft
  hist:   2 remaining (histedit --continue)

  $ hg histedit --abort 2>&1 | fixbundle

modified files should survive the abort when we've moved away already
  $ hg st
  A e
  ? edit.sh

  $ graphlog "log after abort"
  % log after abort
  o  5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
  |
  o  4 e860deea161a2f77de56603b340ebbb4536308ae "e"
  |
  o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  @  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  
aborting and not changing files can skip mentioning updating (no) files
  $ hg up
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg commit --close-branch -m 'closebranch'
  $ startediting 1 1 "(not changing anything)" # edit the 3rd of 3 changesets
  % start editing the history (not changing anything)
  | edit 292aec348d9e 6 closebranch
  Editing (292aec348d9e), you may commit or record as needed now.
  (hg histedit --continue to resume)
  $ hg histedit --abort

  $ cd ..