Mercurial > hg

view tests/test-http-permissions.t @ 44363:f7459da77f23

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
nodemap: introduce an option to use mmap to read the nodemap mapping The performance and memory benefit is much greater if we don't have to copy all the data in memory for each information. So we introduce an option (on by default) to read the data using mmap. This changeset is the last one definition the API for index support nodemap data. (they have to be able to use the mmaping). Below are some benchmark comparing the best we currently have in 5.3 with the final step of this series (using the persistent nodemap implementation in Rust). The benchmark run `hg perfindex` with various revset and the following variants: Before: * do not use the persistent nodemap * use the CPython implementation of the index for nodemap * use mmapping of the changelog index After: * use the MixedIndex Rust code, with the NodeTree object for nodemap access (still in review) * use the persistent nodemap data from disk * access the persistent nodemap data through mmap * use mmapping of the changelog index The persistent nodemap greatly speed up most operation on very large repositories. Some of the previously very fast lookup end up a bit slower because the persistent nodemap has to be setup. However the absolute slowdown is very small and won't matters in the big picture. Here are some numbers (in seconds) for the reference copy of mozilla-try: Revset Before After abs-change speedup -10000: 0.004622 0.005532 0.000910 × 0.83 -10: 0.000050 0.000132 0.000082 × 0.37 tip 0.000052 0.000085 0.000033 × 0.61 0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29 0 0.023521 0.000084 -0.023437 × 280.01 (-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37 (-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79 (-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55 :99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84 :9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68 :9 0.316450 0.000143 -0.316307 ×2212.93 On smaller repositories, the cost of nodemap related operation is not as big, so the win is much more modest. Yet it helps shaving a handful of millisecond here and there. Here are some numbers (in seconds) for the reference copy of mercurial: Revset Before After abs-change speedup -10: 0.000065 0.000097 0.000032 × 0.67 tip 0.000063 0.000078 0.000015 × 0.80 0 0.000561 0.000079 -0.000482 × 7.10 -10000: 0.004609 0.003648 -0.000961 × 1.26 0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35 (-10:) + :9 0.002187 0.000108 -0.002079 ×20.25 (-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68 (-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71 :9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96 :9 0.003854 0.000099 -0.003755 ×38.92 :99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02 Differential Revision: https://phab.mercurial-scm.org/D7894
author Pierre-Yves David <pierre-yves.david@octobus.net>
date Tue, 11 Feb 2020 11:18:52 +0100
parents c3491d3f8984
children ebee234d952a
line wrap: on
line source

  $ cat > fakeremoteuser.py << EOF
  > import os
  > from mercurial.hgweb import hgweb_mod
  > from mercurial import wireprotov1server
  > class testenvhgweb(hgweb_mod.hgweb):
  >     def __call__(self, env, respond):
  >         # Allow REMOTE_USER to define authenticated user.
  >         if r'REMOTE_USER' in os.environ:
  >             env[r'REMOTE_USER'] = os.environ[r'REMOTE_USER']
  >         # Allow REQUEST_METHOD to override HTTP method
  >         if r'REQUEST_METHOD' in os.environ:
  >             env[r'REQUEST_METHOD'] = os.environ[r'REQUEST_METHOD']
  >         return super(testenvhgweb, self).__call__(env, respond)
  > hgweb_mod.hgweb = testenvhgweb
  > 
  > @wireprotov1server.wireprotocommand(b'customreadnoperm')
  > def customread(repo, proto):
  >     return b'read-only command no defined permissions\n'
  > @wireprotov1server.wireprotocommand(b'customwritenoperm')
  > def customwritenoperm(repo, proto):
  >     return b'write command no defined permissions\n'
  > @wireprotov1server.wireprotocommand(b'customreadwithperm', permission=b'pull')
  > def customreadwithperm(repo, proto):
  >     return b'read-only command w/ defined permissions\n'
  > @wireprotov1server.wireprotocommand(b'customwritewithperm', permission=b'push')
  > def customwritewithperm(repo, proto):
  >     return b'write command w/ defined permissions\n'
  > EOF

  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > fakeremoteuser = $TESTTMP/fakeremoteuser.py
  > strip =
  > EOF

  $ hg init test
  $ cd test
  $ echo a > a
  $ hg ci -Ama
  adding a
  $ cd ..
  $ hg clone test test2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd test2
  $ echo a >> a
  $ hg ci -mb
  $ hg book bm -r 0
  $ cd ../test

web.deny_read=* prevents access to wire protocol for all users

  $ cat > .hg/hgrc <<EOF
  > [web]
  > deny_read = *
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=stream_out'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_read=* with REMOTE_USER set still locks out clients

  $ REMOTE_USER=authed_user hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=stream_out'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_read=<user> denies access to unauthenticated user

  $ cat > .hg/hgrc <<EOF
  > [web]
  > deny_read = baduser1,baduser2
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_read=<user> denies access to users in deny list

  $ REMOTE_USER=baduser2 hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_read=<user> allows access to authenticated users not in list

  $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  200 Script output follows
  
  read-only command w/ defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found

  $ killdaemons.py

web.allow_read=* allows reads for unauthenticated users

  $ cat > .hg/hgrc <<EOF
  > [web]
  > allow_read = *
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  200 Script output follows
  
  read-only command w/ defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found

  $ killdaemons.py

web.allow_read=* allows read for authenticated user

  $ REMOTE_USER=authed_user hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  200 Script output follows
  
  read-only command w/ defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found

  $ killdaemons.py

web.allow_read=<user> does not allow unauthenticated users to read

  $ cat > .hg/hgrc <<EOF
  > [web]
  > allow_read = gooduser
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow_read=<user> does not allow user not in list to read

  $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow_read=<user> allows read from user in list

  $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  200 Script output follows
  
  cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b	1
  publishing	True (no-eol)

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  200 Script output follows
  
  read-only command w/ defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found

  $ killdaemons.py

web.deny_read takes precedence over web.allow_read

  $ cat > .hg/hgrc <<EOF
  > [web]
  > allow_read = baduser
  > deny_read = baduser
  > EOF

  $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow-pull=false denies read access to repo

  $ cat > .hg/hgrc <<EOF
  > [web]
  > allow-pull = false
  > EOF

  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities'
  401 pull not authorized
  
  0
  pull not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
  401 pull not authorized
  
  0
  pull not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases'
  401 pull not authorized
  
  0
  pull not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 pull not authorized
  
  0
  pull not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg --cwd ../test2 pull http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py

Attempting a write command with HTTP GET fails

  $ cat > .hg/hgrc <<EOF
  > EOF

  $ REQUEST_METHOD=GET hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg bookmarks
  no bookmarks set
  $ hg bookmark -d bm
  abort: bookmark 'bm' does not exist
  [255]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ killdaemons.py

Attempting a write command with an unknown HTTP verb fails

  $ REQUEST_METHOD=someverb hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ hg bookmarks
  no bookmarks set
  $ hg bookmark -d bm
  abort: bookmark 'bm' does not exist
  [255]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  405 push requires POST request
  
  0
  push requires POST request
  [1]

  $ killdaemons.py

Pushing on a plaintext channel is disabled by default

  $ cat > .hg/hgrc <<EOF
  > EOF

  $ REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  403 ssl required
  
  0
  ssl required
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  403 ssl required
  
  0
  ssl required
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  403 ssl required
  
  0
  ssl required
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  403 ssl required
  
  0
  ssl required
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: HTTP Error 403: ssl required
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: HTTP Error 403: ssl required
  [255]

  $ killdaemons.py

web.deny_push=* denies pushing to unauthenticated users

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > deny_push = *
  > EOF

  $ REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_push=* denies pushing to authenticated users

  $ REMOTE_USER=someuser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_push=<user> denies pushing to user in list

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > deny_push = baduser
  > EOF

  $ REMOTE_USER=baduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.deny_push=<user> denies pushing to user not in list because allow-push isn't set

  $ REMOTE_USER=gooduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow-push=* allows pushes from unauthenticated users

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > allow-push = *
  > EOF

  $ REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  200 Script output follows
  
  1

  $ hg bookmarks
     bm                        0:cb9a9f314b8b
  $ hg book -d bm

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  200 Script output follows
  
  write command no defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  200 Script output follows
  
  write command w/ defined permissions

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  exporting bookmark bm
  [1]

  $ hg book -d bm

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

  $ hg strip -r 1:
  saved backup bundle to $TESTTMP/test/.hg/strip-backup/ba677d0156c1-eea704d7-backup.hg

  $ killdaemons.py

web.allow-push=* allows pushes from authenticated users

  $ REMOTE_USER=someuser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  200 Script output follows
  
  1

  $ hg bookmarks
     bm                        0:cb9a9f314b8b
  $ hg book -d bm

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  200 Script output follows
  
  write command no defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  200 Script output follows
  
  write command w/ defined permissions

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  exporting bookmark bm
  [1]

  $ hg book -d bm

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

  $ hg strip -r 1:
  saved backup bundle to $TESTTMP/test/.hg/strip-backup/ba677d0156c1-eea704d7-backup.hg

  $ killdaemons.py

web.allow-push=<user> denies push to user not in list

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > allow-push = gooduser
  > EOF

  $ REMOTE_USER=baduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow-push=<user> allows push from user in list

  $ REMOTE_USER=gooduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  200 Script output follows
  
  1

  $ hg bookmarks
     bm                        0:cb9a9f314b8b
  $ hg book -d bm

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  200 Script output follows
  
  1

  $ hg bookmarks
     bm                        0:cb9a9f314b8b
  $ hg book -d bm

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  200 Script output follows
  
  write command no defined permissions

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  200 Script output follows
  
  write command w/ defined permissions

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  exporting bookmark bm
  [1]

  $ hg book -d bm

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

  $ hg strip -r 1:
  saved backup bundle to $TESTTMP/test/.hg/strip-backup/ba677d0156c1-eea704d7-backup.hg

  $ killdaemons.py

web.deny_push takes precedence over web.allow_push

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > allow-push = someuser
  > deny_push = someuser
  > EOF

  $ REMOTE_USER=someuser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 push not authorized
  
  0
  push not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: authorization failed
  [255]

  $ killdaemons.py

web.allow-push has no effect if web.deny_read is set

  $ cat > .hg/hgrc <<EOF
  > [web]
  > push_ssl = false
  > allow-push = *
  > deny_read = *
  > EOF

  $ REQUEST_METHOD=POST REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ hg bookmarks
  no bookmarks set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm'
  401 read not authorized
  
  0
  read not authorized
  [1]

Reset server to remove REQUEST_METHOD hack to test hg client

  $ killdaemons.py
  $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

  $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ hg --cwd ../test2 push http://localhost:$HGPORT/
  pushing to http://localhost:$HGPORT/
  abort: authorization failed
  [255]

  $ killdaemons.py