Mercurial > hg
view tests/test-http-proxy.t @ 44363:f7459da77f23
nodemap: introduce an option to use mmap to read the nodemap mapping
The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.
This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).
Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:
Before:
* do not use the persistent nodemap
* use the CPython implementation of the index for nodemap
* use mmapping of the changelog index
After:
* use the MixedIndex Rust code, with the NodeTree object for nodemap access
(still in review)
* use the persistent nodemap data from disk
* access the persistent nodemap data through mmap
* use mmapping of the changelog index
The persistent nodemap greatly speed up most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.
Here are some numbers (in seconds) for the reference copy of mozilla-try:
Revset Before After abs-change speedup
-10000: 0.004622 0.005532 0.000910 × 0.83
-10: 0.000050 0.000132 0.000082 × 0.37
tip 0.000052 0.000085 0.000033 × 0.61
0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29
0 0.023521 0.000084 -0.023437 × 280.01
(-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37
(-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79
(-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55
:99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84
:9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68
:9 0.316450 0.000143 -0.316307 ×2212.93
On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.
Here are some numbers (in seconds) for the reference copy of mercurial:
Revset Before After abs-change speedup
-10: 0.000065 0.000097 0.000032 × 0.67
tip 0.000063 0.000078 0.000015 × 0.80
0 0.000561 0.000079 -0.000482 × 7.10
-10000: 0.004609 0.003648 -0.000961 × 1.26
0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35
(-10:) + :9 0.002187 0.000108 -0.002079 ×20.25
(-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68
(-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71
:9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96
:9 0.003854 0.000099 -0.003755 ×38.92
:99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02
Differential Revision: https://phab.mercurial-scm.org/D7894
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Tue, 11 Feb 2020 11:18:52 +0100 |
parents | f2f538725d07 |
children | ebee234d952a |
line wrap: on
line source
#require serve $ hg init a $ cd a $ echo a > a $ hg ci -Ama -d '1123456789 0' adding a $ hg serve --config server.uncompressed=True -p $HGPORT -d --pid-file=hg.pid $ cat hg.pid >> $DAEMON_PIDS $ cd .. $ tinyproxy.py $HGPORT1 localhost 2>proxy.log >/dev/null </dev/null & $ while [ ! -f proxy.pid ]; do sleep 0; done $ cat proxy.pid >> $DAEMON_PIDS url for proxy, stream $ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone --stream http://localhost:$HGPORT/ b streaming all changes 6 files to transfer, 412 bytes of data (reporevlogstore !) 4 files to transfer, 330 bytes of data (reposimplestore !) transferred * bytes in * seconds (*/sec) (glob) updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd b $ hg verify checking changesets checking manifests crosschecking files in changesets and manifests checking files checked 1 changesets with 1 changes to 1 files $ cd .. url for proxy, pull $ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone http://localhost:$HGPORT/ b-pull requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 83180e7845de updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd b-pull $ hg verify checking changesets checking manifests crosschecking files in changesets and manifests checking files checked 1 changesets with 1 changes to 1 files $ cd .. host:port for proxy $ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ c requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 83180e7845de updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved proxy url with user name and password $ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ d requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 83180e7845de updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved url with user name and password $ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://user:passwd@localhost:$HGPORT/ e requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 83180e7845de updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved bad host:port for proxy ("Protocol not supported" can happen on misconfigured hosts) $ http_proxy=localhost:$HGPORT2 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ f abort: error: (Connection refused|Protocol not supported|.* actively refused it|\$EADDRNOTAVAIL\$|No route to host) (re) [255] do not use the proxy if it is in the no list $ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.no=localhost http://localhost:$HGPORT/ g requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 83180e7845de updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cat proxy.log * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=0&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&stream=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob) $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)