view tests/test-inherit-mode.t @ 44363:f7459da77f23

nodemap: introduce an option to use mmap to read the nodemap mapping

The performance and memory benefit is much greater if we don't have to copy all
the data in memory for each information. So we introduce an option (on by
default) to read the data using mmap.

This changeset is the last one definition the API for index support nodemap
data. (they have to be able to use the mmaping).

Below are some benchmark comparing the best we currently have in 5.3 with the
final step of this series (using the persistent nodemap implementation in
Rust). The benchmark run `hg perfindex` with various revset and the following
variants:

Before:

 * do not use the persistent nodemap
 * use the CPython implementation of the index for nodemap
 * use mmapping of the changelog index

After:

 * use the MixedIndex Rust code, with the NodeTree object for nodemap access
   (still in review)
 * use the persistent nodemap data from disk
 * access the persistent nodemap data through mmap
 * use mmapping of the changelog index

The persistent nodemap greatly speed up  most operation on very large
repositories. Some of the previously very fast lookup end up a bit slower because
the persistent nodemap has to be setup. However the absolute slowdown is very
small and won't matters in the big picture.

Here are some numbers (in seconds) for the reference copy of mozilla-try:

Revset            Before   After     abs-change speedup

-10000:           0.004622 0.005532   0.000910  ×   0.83
-10:              0.000050 0.000132   0.000082  ×   0.37
tip               0.000052 0.000085   0.000033  ×   0.61
0 + (-10000:)     0.028222 0.005337  -0.022885  ×   5.29
0                 0.023521 0.000084  -0.023437  × 280.01
(-10000:) + 0     0.235539 0.005308  -0.230231  ×  44.37
(-10:) + :9       0.232883 0.000180  -0.232703  ×1293.79
(-10000:) + (:99) 0.238735 0.005358  -0.233377  ×  44.55
:99 + (-10000:)   0.317942 0.005593  -0.312349  ×  56.84
:9 + (-10:)       0.313372 0.000179  -0.313193  ×1750.68
:9                0.316450 0.000143  -0.316307  ×2212.93


On smaller repositories, the cost of nodemap related operation is not as big, so
the win is much more modest. Yet it helps shaving a handful of millisecond here
and there.

Here are some numbers (in seconds) for the reference copy of mercurial:

Revset            Before   After     abs-change speedup
-10:              0.000065 0.000097   0.000032  × 0.67
tip               0.000063 0.000078   0.000015  × 0.80
0                 0.000561 0.000079  -0.000482  × 7.10
-10000:           0.004609 0.003648  -0.000961  × 1.26
0 + (-10000:)     0.005023 0.003715  -0.001307  × 1.35
(-10:) + :9       0.002187 0.000108  -0.002079  ×20.25
(-10000:) + 0     0.006252 0.003716  -0.002536  × 1.68
(-10000:) + (:99) 0.006367 0.003707  -0.002660  × 1.71
:9 + (-10:)       0.003846 0.000110  -0.003736  ×34.96
:9                0.003854 0.000099  -0.003755  ×38.92
:99 + (-10000:)   0.007644 0.003778  -0.003866  × 2.02

Differential Revision: https://phab.mercurial-scm.org/D7894

#require unix-permissions

test that new files created in .hg inherit the permissions from .hg/store

  $ mkdir dir

just in case somebody has a strange $TMPDIR

  $ chmod g-s dir
  $ cd dir

  $ cat >printmodes.py <<EOF
  > from __future__ import absolute_import, print_function
  > import os
  > import sys
  > 
  > allnames = []
  > isdir = {}
  > for root, dirs, files in os.walk(sys.argv[1]):
  >     for d in dirs:
  >         name = os.path.join(root, d)
  >         isdir[name] = 1
  >         allnames.append(name)
  >     for f in files:
  >         name = os.path.join(root, f)
  >         allnames.append(name)
  > allnames.sort()
  > for name in allnames:
  >     suffix = name in isdir and '/' or ''
  >     print('%05o %s%s' % (os.lstat(name).st_mode & 0o7777, name, suffix))
  > EOF

  $ cat >mode.py <<EOF
  > from __future__ import absolute_import, print_function
  > import os
  > import sys
  > print('%05o' % os.lstat(sys.argv[1]).st_mode)
  > EOF

  $ umask 077

  $ hg init repo
  $ cd repo

  $ chmod 0770 .hg/store .hg/cache .hg/wcache

before commit
store can be written by the group, other files cannot
store is setgid

  $ "$PYTHON" ../printmodes.py .
  00700 ./.hg/
  00600 ./.hg/00changelog.i
  00770 ./.hg/cache/
  00600 ./.hg/requires
  00770 ./.hg/store/
  00770 ./.hg/wcache/

  $ mkdir dir
  $ touch foo dir/bar
  $ hg ci -qAm 'add files'

after commit
working dir files can only be written by the owner
files created in .hg can be written by the group
(in particular, store/**, dirstate, branch cache file, undo files)
new directories are setgid

  $ "$PYTHON" ../printmodes.py .
  00700 ./.hg/
  00600 ./.hg/00changelog.i
  00770 ./.hg/cache/
  00660 ./.hg/cache/branch2-served
  00660 ./.hg/cache/rbc-names-v1
  00660 ./.hg/cache/rbc-revs-v1
  00660 ./.hg/dirstate
  00660 ./.hg/fsmonitor.state (fsmonitor !)
  00660 ./.hg/last-message.txt
  00600 ./.hg/requires
  00770 ./.hg/store/
  00660 ./.hg/store/00changelog.i
  00660 ./.hg/store/00manifest.i
  00770 ./.hg/store/data/
  00770 ./.hg/store/data/dir/
  00660 ./.hg/store/data/dir/bar.i (reporevlogstore !)
  00660 ./.hg/store/data/foo.i (reporevlogstore !)
  00770 ./.hg/store/data/dir/bar/ (reposimplestore !)
  00660 ./.hg/store/data/dir/bar/b80de5d138758541c5f05265ad144ab9fa86d1db (reposimplestore !)
  00660 ./.hg/store/data/dir/bar/index (reposimplestore !)
  00770 ./.hg/store/data/foo/ (reposimplestore !)
  00660 ./.hg/store/data/foo/b80de5d138758541c5f05265ad144ab9fa86d1db (reposimplestore !)
  00660 ./.hg/store/data/foo/index (reposimplestore !)
  00660 ./.hg/store/fncache (repofncache !)
  00660 ./.hg/store/phaseroots
  00660 ./.hg/store/undo
  00660 ./.hg/store/undo.backupfiles
  00660 ./.hg/store/undo.phaseroots
  00660 ./.hg/undo.backup.dirstate
  00660 ./.hg/undo.bookmarks
  00660 ./.hg/undo.branch
  00660 ./.hg/undo.desc
  00660 ./.hg/undo.dirstate
  00770 ./.hg/wcache/
  00711 ./.hg/wcache/checkisexec
  007.. ./.hg/wcache/checklink (re)
  00600 ./.hg/wcache/checklink-target
  00660 ./.hg/wcache/manifestfulltextcache (reporevlogstore !)
  00700 ./dir/
  00600 ./dir/bar
  00600 ./foo

  $ umask 007
  $ hg init ../push

before push
group can write everything

  $ "$PYTHON" ../printmodes.py ../push
  00770 ../push/.hg/
  00660 ../push/.hg/00changelog.i
  00770 ../push/.hg/cache/
  00660 ../push/.hg/requires
  00770 ../push/.hg/store/
  00770 ../push/.hg/wcache/

  $ umask 077
  $ hg -q push ../push

after push
group can still write everything

  $ "$PYTHON" ../printmodes.py ../push
  00770 ../push/.hg/
  00660 ../push/.hg/00changelog.i
  00770 ../push/.hg/cache/
  00660 ../push/.hg/cache/branch2-base
  00660 ../push/.hg/dirstate
  00660 ../push/.hg/requires
  00770 ../push/.hg/store/
  00660 ../push/.hg/store/00changelog.i
  00660 ../push/.hg/store/00manifest.i
  00770 ../push/.hg/store/data/
  00770 ../push/.hg/store/data/dir/
  00660 ../push/.hg/store/data/dir/bar.i (reporevlogstore !)
  00660 ../push/.hg/store/data/foo.i (reporevlogstore !)
  00770 ../push/.hg/store/data/dir/bar/ (reposimplestore !)
  00660 ../push/.hg/store/data/dir/bar/b80de5d138758541c5f05265ad144ab9fa86d1db (reposimplestore !)
  00660 ../push/.hg/store/data/dir/bar/index (reposimplestore !)
  00770 ../push/.hg/store/data/foo/ (reposimplestore !)
  00660 ../push/.hg/store/data/foo/b80de5d138758541c5f05265ad144ab9fa86d1db (reposimplestore !)
  00660 ../push/.hg/store/data/foo/index (reposimplestore !)
  00660 ../push/.hg/store/fncache (repofncache !)
  00660 ../push/.hg/store/undo
  00660 ../push/.hg/store/undo.backupfiles
  00660 ../push/.hg/store/undo.phaseroots
  00660 ../push/.hg/undo.bookmarks
  00660 ../push/.hg/undo.branch
  00660 ../push/.hg/undo.desc
  00660 ../push/.hg/undo.dirstate
  00770 ../push/.hg/wcache/


Test that we don't lose the setgid bit when we call chmod.
Not all systems support setgid directories (e.g. HFS+), so
just check that directories have the same mode.

  $ cd ..
  $ hg init setgid
  $ cd setgid
  $ chmod g+rwx .hg/store
  $ chmod g+s .hg/store 2> /dev/null || true
  $ mkdir dir
  $ touch dir/file
  $ hg ci -qAm 'add dir/file'
  $ storemode=`"$PYTHON" ../mode.py .hg/store`
  $ dirmode=`"$PYTHON" ../mode.py .hg/store/data/dir`
  $ if [ "$storemode" != "$dirmode" ]; then
  >  echo "$storemode != $dirmode"
  > fi
  $ cd ..

  $ cd .. # g-s dir